WTS: Rapid LED Cree DIY setup

[brent]

DIY LED setup

Selling a project I never finished. Includes:

3 Meanwell Drivers (2 dimmable):

Eln-60-27d for the 10W LEDs

Eln-60-48p for the others

Lpc-35-700

1 Rapid LED dimmer

24 CREE LEDs including some 10W whites

3 1/2 foot Heatsink

Soldering Iron & holder

All for $100

(Drivers alone are worth this much)

Collection near Haig Road

Nine too 7 o too eight 6 2

[brent]

Reserved

[brent]

This hasn't been collected and so it's available again.

One of the LEDs was spoiled and so there are actually a total of 23 LEDs.

Here is the distribution:

13 CREE Royal Blue 5W

7 CREE Cool White 10W

2 Violet 3W

1 CREE Blue 3W

All lights are from RapidLED.

My original plan was to have 13 (or 14) Royal Blues on the Meanwell Eln-60-48p, the 7 Cool White 10W on the Eln-60-27d, and the 2 violets & 1 blue on the Lpc-35-700 for the moonlights. This should give you a total of 144W, which is quite good coverage.

These are mounted using thermal pads so that they can be easily removed without harming the LEDs.

The soldering iron is a Japanese Goot KX-60R.

[brent]

Reserved

[brent]

Collected. Mods pls close. Thanks!