Jump to content

Yet another 4ft shallow tank in the making


whq
 Share

Recommended Posts

After years of considerations, finally embarking with a bigger tank. Have doing nano tank quiet while reading and learning.

With this new embarkment, i like to share some of my setup plans. Hope all bros can give some advise to fine tune my tank.

Tank size: 4 x 1.5 x 1.5ft with sump (custom made and pending delivery due to new house renovation)

Lightset: Ati sunpower 6 x 39w (will be collecting from a bro and still thinking of the tube combo)

Skimmer: bubblemagus nac 3.5 (understand this is severely underpower, but due to budget i planning upfrade for this at later time)

Wavemaker: jebao rw 15

Return pump: jebao dc 10k (will do a t-joint to chiller, the return to main tank will be splitted into another 2 inlet at front and back of tank)

Doser: 4 channel jebao doser (currently planning for fauna marin balling lite, any comments or reccomendations?)

Ato: smart auto top up system (which compartment do you guys put it in? Planning for the return compartment in sump)

Chiller: hailea 66a feed off from jebao dc 10k

Overflow: will go into a 4inch diameter filter sock from main tank

This tank is mainly planned for a mixed reef tank with top portion dominated with sps and bottom portion with various lps. Currently also planning for a thin layer of sand for contrast, but abit worried on the dirty sand bed look. For my sump, i am thinking of setting up a diy algae scrubber using the airlift method supplemented with some chaeto. Is this sufficient to avoid using fr for nitrate and phosphate resin (reducing cost as well as wanting tank to be as natural as possible)

Hope to hear some advice.

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Thanks bro, will follow up with pic soon... my tank will be coming next week. Skimmer is definitely a big concern for me...

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

  • 2 weeks later...

Finally tank is in and initial setup... partial water filled will continue tomorrow and start cycling...

Some equip purchased

Skimz sm161 from a nice bro

Jebao dc12k

Pending final purchased of chiller

3yvajy3y.jpg

Covered for now to prevent dust...

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Dead rock sunned and epoxy... placed in dt to start the cycling process. My initial scaping...

esa8ata7.jpg

  • Like 1

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Love your setup... I m cycling my 4ft shallow tank too :)

Thanks bro for the compliment! Nice we can share some pointers too.

Nice rock. Less is more. Btw good choice of ATI t5 !

Sent from my GT-N7105 using Tapatalk

Thanks bro, wanted to create more space for swimming area. The left rock mainly planned to have sps on top with yuma below. The right rock mainly some sps with lps and some zoas. Hopefully whole arrangement to give a very different 3 way viewing experience

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Nice position of ur tank..nice rock scape, many space to put corals..can make it like AM's both DTs like that :)

Thanks bro, your eyes are sharp! This tank setup is heavily influence by AM arrangement. Like the idea of clean simplicity with ample of room for fishes to roam around.

So eventually buy some beautiful tang like your tank lol.

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Initially decided on bare bottom but did not quite like the empty feeling... added sand and lowered to flow rate to prevent hurricane in the dt

post-18020-14065980743866_thumb.jpg

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

wow!! nice set up!! champing here for more update.

Bro, you also have a very nice tank... have been reading your thread as reference:)

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Old tank not in good condition (verge of crashing) thus transfered all the live stock over to the new tank. New tank has been heavily dosed with Microbact 7 daily.

Current Livestock

1 pair true percula clownfish

1 six line wrasse

1 firefish

2 snails

Due to lack of time to purchase coral rx, i soak all corals into DI water. Very bad mistake as SPS are all bleaching (forget sps not suitable for freshwater dip, stupid me).

Future stock list (Plans to stock them slowly from 3 weeks onwards)

1 Yellow tank

1 Blue tank

1 powder tang

1 kole tang

3 chromis valida (exchangable for other species)

3 anthias

Do advise if there are any livestock that is recommended as i like to have multiple color.

For corals i am looking at mainly acropora spses, birdnest, zoas, yuma and some elegance/leather.

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Nice setup!!

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Bro, you might want to lower your ATI to 4-7" above water surface for faster sps colouring :)

Cheers,

James

  • Like 1

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Bro, you might want to lower your ATI to 4-7" above water surface for faster sps colouring :)

Cheers,

James

Thanks bro, will lower the light more once i completed adding in of my first phase coral and fishes. Right now i only have a bunch of bleached sps. In hope they will recover lol. No sign of recovery so far

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Sad to hear the crashing. But I really like the clean and clear idea. Hope your sps recovers well!On a side note, ur house looks like the yishun new houses. Haha.

Thanks bro... can only blame my stupidity to freshwater dip my sps... my old tank is not doing well and infested with lots of algae thus did the dip to be sure lol.

My house is in sengkang haha

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Thanks to a very nice bro for not just giving chaeto but a few other frags of sps.

Do see my 3 different view of my tank below. Am trying to make a mix reef but with very distinct view for each side. Not sure if it will work but am trying.

post-18020-14076867463583_thumb.jpgpost-18020-140768675428_thumb.jpgpost-18020-14076867625391_thumb.jpg

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

  • SRC Member

Very clean minimalist look.....I like !

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

I like ! esp 3 sides view make ut transparent n Clean.

bro. do keep it as this. dont ichy add rock hor :D

Sent from my GT-N7105 using Tapatalk

Thanks bro, definitely no more rock... more corals only lol. Now headache is planning what coral for each view ... maybe smaller side for lps like true octo with some elegance. For long side, one will have highlights from yuma n zoas garden and the other side mainly sps like red/blue dragon as highlight

Very clean minimalist look.....I like !

Cheers,

James

Thanks bro.

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

  • SRC Member

Thanks bro, definitely no more rock... more corals only lol. Now headache is planning what coral for each view ... maybe smaller side for lps like true octo with some elegance. For long side, one will have highlights from yuma n zoas garden and the other side mainly sps like red/blue dragon as highlight

Thanks bro.

cool!!

BTW, are you able to take out the rock now? if so, you may want to drill some holes on the side of rock, so it would be much easier to add sps frag or zoas frags.

i did it for all my rocks, and now i still feel not enough holes.

haha

:superman: :superman: :superman: :superman: :superman: :superman: :superman:

Link to comment
Share on other sites

cool!!

BTW, are you able to take out the rock now? if so, you may want to drill some holes on the side of rock, so it would be much easier to add sps frag or zoas frags.

i did it for all my rocks, and now i still feel not enough holes.

haha

That's a good idea. But my rock can't be removed as it is epoxy as one big piece. Can only glue frags onto the rock.

Tank setup

4ft x 1.5ft x 1.5ft (3 way viewing)

ATI Sunpower 6 x 39w

Arctica 1/5Hp

Skimz SM161 skimmer

Smart ATO system

Jebao DC 12k

Jebao dosing pump (Fauna Marine Lite balling - Thinking)

Jebao RW 15 wavemaker


Upgrading in Process.....

More infomation coming soon!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS PURPLE MONTI WITH BLUE MOUTH

    2. 0

      WTS Rockscape

    3. 0

      滑铁卢大学申请学校UW毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Western Ontario

×
×
  • Create New...