Jump to content

Exxe's Reef


Recommended Posts

  • SRC Member

Hi All,

As most of you guys know, im upgrading again :-)

Letting go of my 3X1.5X1.8 for a bigger piece of the action.

Most of the equipment are mostly sold off cheap, or brought over to my new tank..

Anyway, tank finally arrived today....!

4X2X2, 10mm glass, with crystal glass front.

3X1.6.1.5 Sump (3 compartments)

Black grained cabinet laminate.

Installed the following items so far.

Hard plumbing done.

Eheim 1262 fixed up.

2 tube Delightings T5 with 2X Blue Plus Tubes.

2 modules of Maxaspect Mazarra S (8 cool whites, 4 warm whites, 4 blue Led per module)

I would love to get some inputs from anyone regarding the light system.

Tank gonna be mainly LPS with 3-4 pieces of SPS frags (just those easy ones)

Following post will be pics of the setup.
Pls feel free to comment if I can improve anything before I setup my tank.

Know what im doing but opinions and comments to improve are always welcomed.

Thanks!

Link to comment
Share on other sites

  • SRC Member

Pictures please. ....

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

Be careful on the output of your mazzara. If possible, raise up the height.

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

Upgrade is always better! Good choice in tank And sump dimensions.

Your lighting is definitely not strong enough for sps,

are you sure it will be mainly lps and not mainly sps in the next 6-8months ? Hahahaha many are poison in yhe end

Wwhat skimmer , how many wavemaker , and are u going to use dosing pump or calciim reactor ??

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Nice tank, bro.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Thanks a lot for the compliments!

Anyway my choice of equipment will be as follows

Lighting - may add on 2 more tubes of t5 (if planning to keep sps), for LPS, I think the current setup will be sufficient.

Skimmer - BM C6(decommed from old tank), may upgrade to a BM Curve 7 or 9

Chiller - Hailea 1/4 powered fed with Boyu 1500l/hr

H2Ocean FR1 = Rowaphos+Rowacarbon with a 600l/hr Aquazonic feeder, using ball valve to regulate flow

H2Ocean FR2 = Bio Pellets with a 600l/hr Aquazonic feeder, using ball valve to regulate flow

Wavemaker = 2X WP 25

Not intending to use any dosing pumps for now or calcium reactor. Might just do manual topups or DIY a dosing pump.

Link to comment
Share on other sites

Wah a lot of nice rocks to play around with bro! My suggestion is to really take it slow with the scaping. Do a layout on the ground, if possible stick them together with epoxy. Can even go the extra mile by drilling holes and placing pvc pipes in between if you wanna achieve your ultimate scape. :thumbsup: A stable structures makes a good reef for a long term.

 

I Love Stagsss

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling the following Items

    2. 0

      WTS Redsea Max Nano Peninsula Complete System

    3. 7

      Decommissioning Sales of 5f Reef Tank

    4. 1

      decom sale im nuvo20

    5. 1

      decom sale im nuvo20

×
×
  • Create New...