Jump to content

Exxe's Reef

Hairul Hakim

By Hairul Hakim,
in Members Tank & Specs

 Share

Recommended Posts

  • SRC Member
Hairul Hakim Enthusiast

Hairul Hakim

Posted
  • SRC Member
Posted

Hi All,

As most of you guys know, im upgrading again :-)

Letting go of my 3X1.5X1.8 for a bigger piece of the action.

Most of the equipment are mostly sold off cheap, or brought over to my new tank..

Anyway, tank finally arrived today....!

4X2X2, 10mm glass, with crystal glass front.

3X1.6.1.5 Sump (3 compartments)

Black grained cabinet laminate.

Installed the following items so far.

Hard plumbing done.

Eheim 1262 fixed up.

2 tube Delightings T5 with 2X Blue Plus Tubes.

2 modules of Maxaspect Mazarra S (8 cool whites, 4 warm whites, 4 blue Led per module)

I would love to get some inputs from anyone regarding the light system.

Tank gonna be mainly LPS with 3-4 pieces of SPS frags (just those easy ones)

Following post will be pics of the setup.
Pls feel free to comment if I can improve anything before I setup my tank.

Know what im doing but opinions and comments to improve are always welcomed.

Thanks!

Link to comment
Share on other sites
  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Hairul Hakim
Hairul Hakim

All equipment fixed up and pellets/rowa are up and running. Hopefully cycle completes soon. Sent from my iPhone using Tapatalk

Posted Images

  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Pictures please. ....

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Be careful on the output of your mazzara. If possible, raise up the height.

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
  • SRC Member
youdontnowm Newbie

youdontnowm

Posted
  • SRC Member
Posted

Upgrade is always better! Good choice in tank And sump dimensions.

Your lighting is definitely not strong enough for sps,

are you sure it will be mainly lps and not mainly sps in the next 6-8months ? Hahahaha many are poison in yhe end

Wwhat skimmer , how many wavemaker , and are u going to use dosing pump or calciim reactor ??

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites
Admiraltian Collaborator

Admiraltian

Posted
Posted

Nice tank, bro.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites
  • SRC Member
Hairul Hakim Enthusiast

Hairul Hakim

Posted
  • Author
  • SRC Member
Posted

Thanks a lot for the compliments!

Anyway my choice of equipment will be as follows

Lighting - may add on 2 more tubes of t5 (if planning to keep sps), for LPS, I think the current setup will be sufficient.

Skimmer - BM C6(decommed from old tank), may upgrade to a BM Curve 7 or 9

Chiller - Hailea 1/4 powered fed with Boyu 1500l/hr

H2Ocean FR1 = Rowaphos+Rowacarbon with a 600l/hr Aquazonic feeder, using ball valve to regulate flow

H2Ocean FR2 = Bio Pellets with a 600l/hr Aquazonic feeder, using ball valve to regulate flow

Wavemaker = 2X WP 25

Not intending to use any dosing pumps for now or calcium reactor. Might just do manual topups or DIY a dosing pump.

Link to comment
Share on other sites
tofubox Enthusiast

tofubox

Posted
Posted

Wah a lot of nice rocks to play around with bro! My suggestion is to really take it slow with the scaping. Do a layout on the ground, if possible stick them together with epoxy. Can even go the extra mile by drilling holes and placing pvc pipes in between if you wanna achieve your ultimate scape. :thumbsup: A stable structures makes a good reef for a long term.

 

I Love Stagsss

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling Nano Tank With FIlter and Chiller and Maxspect Jump L-130

      Selling the above. All Items Used for 3 months only. 1.Tank and HOB FIlter. (Tank size: L38cm x W30cm x H 28cm). Selling for $50 2.Maxspect Jump L130. Selling for $60 3. Chiller good for 60l. Selling for $80 Take all for $160. FCFS Collection only, Bukit Batok. PM me to deal.
      Zac in Sell off/Pasar Malam Shop
    2. 2

      Fluval Sea Marine & Reef LED 2.0

      Upz Sent from my SM-N980F using Tapatalk
      Shilamin in Sell off/Pasar Malam Shop
    3. 225

      WTS live rotifers, tigger pods, phyto

      ups tele me at littlefishaqua location at tamp/hougang $50 worth of purchase foc delivery
      MarineSeller in Sell off/Pasar Malam Shop
    4. 0

      Corals to sell/give

      Free - Have several GSP on tank wall. Can scrape and give to whoever wants Free several broken pieces of monti Also large size green monti for sale for $20 Zoa colony on rock $20 zoas with GSP (slightly bigger) $10 zoas only Medium size toadstool -$15 Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    5. 0

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma ◆【咨询方式】 微信 ：A746103619 -----------------◆---------------------业务类型-------------------◆-----------------------------◆ 【主营项目】： ★★毕业証、成绩单-- OFFER--真实可查留信网认证等.等！ ★★办理各国各大学文凭（一对一专业服务，可全程监控跟踪进度） -----------------◆---------------------制作工艺-------------------◆-----------------------------◆ 【高仿真】： ★★凭借多年的制作经验本公司制作《激光》《水印》《钢印》《烫金》《紫外线》凹凸版，uv版等防伪技术一流，高精仿度几乎跟学校100%相同！让您绝对满意。 -----------------◆---------------------操作周期-------------------◆----------------------------◆ 【高效率】 ★★本公司承诺各位顾客在最短时间内制作完成并交货。不论您身在何处，只要您有需要，我们便会以最高效的办事效率满足您的需求，如果我们没有您所想办的学校那么只要您能提供版本我们就可以为您专门开版办理一周内完成。 -----------------◆---------------------公司理念-------------------◆-----------------------------◆ 【诚信为主】： ★★我們以質量求生存，.以服务求发展有雄厚的实力，专业的团队咨询顾问为您细心解答，可详谈，是真是假，眼见为实，让您真正放心，平凡人生,尽我所能助您一臂之力让我們携手圆您梦想! ◆【公司宗旨】：诚信为主，質量爲本，客戶爲先，解您所忧 ！ -----------------◆---------------------业务范围-------------------◆-----------------------------◆ 【主营国家】:加拿大、澳大利亞、新西蘭、新加坡、美國、英國、歐洲-----等等! -----------------◆---------------------联系方式-------------------◆-----------------------------◆ 【贴心专线】: 微信：A746103619 ★敬请保留此联系方式，以备用！如有不在线请给我们留言！我们将在第一时间给您回复! ★★此贴长年有效——欢迎各位新老顾客咨询，我们将会竭诚为您服务!
      imyosq2quv in LPS Coral forum
×
×
  • Create New...