Jump to content

my humble tank


Planted
 Share

Recommended Posts

My humble tank.

First in 2.5ft tank with chiller and canister for 1 yr plus

Then to 2ft tank with internal pump without chiller, temp went up to 31 recently due to hot weather. For 3 mths.

Finally to this 2ft ios tank with chiller. For as long as possible.

1913312_10152100918275849_44199592388609

  • Like 1
Link to comment
Share on other sites

Looks very clean.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Running a chiller is definitely a better choice here in Singapore. Without a stable temp, your tank parameters will fluctuate badly which will be tedious to work on for long duration of time. Btw, beautiful scaping :) Sent from my GT-I9300 using Tapatalk

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

Nice Scape!..Beautifull Tank..Alot of potential! :)

///Cheers!.

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

  • SRC Member

Yup agreed. This tank scape have a lot of potential

Sent from my GT-I9300 using Tapatalk

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Another 2ft ios! Sweet! :yahoo: Are those artificial corals on the left? Good scape, but i would remove the coral chips on the sandbed, its gonna build up detritus

 

I Love Stagsss

Link to comment
Share on other sites

Thank you everyone for your encouragement! hope this would be a success. :D

As this is my first time using IOS, I'm using the coral chips to block the bottom inlet to prevent sand from clogging. do not know if this is necessary, feel free to advise me! :D

Yes, the corals on the left are artificial corals, just put a plate of mushroom on top the green fake monti :P

heh.

Link to comment
Share on other sites

Hmm, I am a little confused. Are you using a undergravel filter or overflow system? Why is your inlet at the bottom?

I'm using IOS, if you are referring to the cluster of coral chips at the left side corner, that's to prevent the sand from entering the bottom inlet of the ios wall. (Like IQ5 there is both top and bottom inlet)

If you are referring to the coral chips around the tank, I use them to increase PH in the past but can remove :))

Hope that helps to clear the confusion. Hee thank you! :D

Link to comment
Share on other sites

  • SRC Member

You can keep some hermits and sand shifter starfish to help keep your sand bed clean.

Sent from my GT-I9300 using Tapatalk

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Ooooh ok, I understand now, didnt know there was a bottom inlet as well. :chair:

Hee. :D I hope its not too big to manage nor too small to mess up parameter with.

You can keep some hermits and sand shifter starfish to help keep your sand bed clean.

Sent from my GT-I9300 using Tapatalk

Ohh. I have 2 hermits which keep patrolling on sand bed and rocks. Flipping some small rocks at times.

I also have 2 snails (forgot the name) which are 24/7 under the sand.

Link to comment
Share on other sites

Hee. :D I hope its not too big to manage nor too small to mess up parameter with.

Ohh. I have 2 hermits which keep patrolling on sand bed and rocks. Flipping some small rocks at times.

I also have 2 snails (forgot the name) which are 24/7 under the sand.

Haha, thats the challenge of a 2ft nano tank bro, keeping the parameters stable. Its not as easy as the bigger tanks. They test once a week, i test every other day of the week just caused i'm always so scared something goes out of place. It will happen so quickly. Sometimes i find myself being too paranoid, but i can't help it. lol.

Its going to be challenging indeed, but don't let mishaps disappoint you, its part and parcel of the learning curve. I'm sure you will do fine bro.

  • Like 1

 

I Love Stagsss

Link to comment
Share on other sites

do you guys think I should get another wavemaker/pump to create more wave based on the corals I have? :D
the top one is alveopora/goniopora (newly added, have yet to identify)
if gonio, what is the flowrate I should be looking at?
if alveo, should I leave it as it is now?

currently the tank runs on 600l/hr pump, and my tank size is at 54litre /15 gallon.

thank you~ your knowledge will come in handy in my learning journey in this hobby :D


Link to comment
Share on other sites

Why not remove the fake corals, over time it will be cover wif detribus & algae, will look ugly IMO.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Hailea HS66a Chiller

    2. 0

      Selling the following Items

    3. 0

      WTG Chaeto

    4. 1

      WTS Livestock

×
×
  • Create New...