SRC Member soggycookies Posted February 8, 2018 SRC Member Share Posted February 8, 2018 Lesson learned since 20171. Stable parameters is more important then correct parameter2. Dirty water is better then nutrient strip water.Hence if you need any adjusting to any of parameters do it gradually over a period of time.Do not correct so fast in order to meet your desire or sweet point.For new setup tolerate a period of failure and ugliness can go a long way towards betterunderstanding of your livestocks requirements. Couldn’t agree with you more bro. Stability is keySent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member soggycookies Posted February 8, 2018 SRC Member Share Posted February 8, 2018 Assemble the 4 inch pipe, cut plastic container base and plastic screen.And this is my DIY All Food feederSent from my LG-H990 using Tapatalk Awesome. I love seeing more DIY stuff from the community, thanks for sharing!Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member andrewsoh Posted February 21, 2018 SRC Member Share Posted February 21, 2018 On 08/02/2018 at 11:08 AM, sherman said: 2nd month of 2018. 13 plus month of no water change. Everything still ok. No major issue. Will continue with no water change. Now water is clean by power filter before return to display tank. (Glenn Fong method, Power filter) I might make some changes here after seeing the rollermat filter. This should be 2nd DIY for 2018. Welcome your comments or share. How does the power filter method works? Thanks! Quote Link to comment Share on other sites More sharing options...
sherman Posted February 21, 2018 Author Share Posted February 21, 2018 Power filter is any pump (especially your return pump) where the input has filter wool to filter the water before it enter the pump. In this way the discharge water into the main tank filtered. Additional pumps can be located at the display tank to further filtered the display tank water Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 5, 2018 Author Share Posted March 5, 2018 Looking into adding a fraq tank soon. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 5, 2018 Author Share Posted March 5, 2018 This is the 15th months of no water change.Everything is stable Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member ronnieloong Posted March 5, 2018 SRC Member Share Posted March 5, 2018 Bro Sherman, I think u can open up a class for tutorial and visit with reefer coming with beer. maybe some freebies in the package. Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Fjdam Posted March 5, 2018 SRC Member Share Posted March 5, 2018 Power filter is any pump (especially your return pump) where the input has filter wool to filter the water before it enter the pump. In this way the discharge water into the main tank filtered. Additional pumps can be located at the display tank to further filtered the display tank water How frequent is the wool change? Do you reuse/wash the wool?Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
sherman Posted March 6, 2018 Author Share Posted March 6, 2018 Thank You ronnielong and Fjdam for reading Fjdam I think it is cheaper and faster to remove and replace. Filter are cheap. I am changing every 2 to 3 weeks No fix duration. Observe the water discharge of your pump. If it drop then its time to replace your filter wool Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 Today Mar 2018 I prepare my self mix iron solution for my reef tank use.Mainly to control PO4 level plus iron supplement for green enchancement and nutrition for algaeSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 Today Mar 2018 I prepare my self mix iron solution for my reef tank use.Mainly to control PO4 level plus iron supplement for green enchancement and nutrition for algaeSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 Iron powder. (For human consumption type) and 1 L of waterSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 3 flat teaspoon of iron powderSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 Stir till iron powder 100% dissolveSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 18, 2018 Author Share Posted March 18, 2018 Store in light tight bottle to prevent oxidationSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Daniel Poh Yang Zheng Posted March 18, 2018 SRC Member Share Posted March 18, 2018 Store in light tight bottle to prevent oxidationSent from my LG-H990 using Tapatalk Does it work like the FE+ from DSRSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Under testing. Will update in a month time Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Prepare vinegar/ sugar solution for NO3 controlSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 450 ml DI water and sugar sheetSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Boil the DI water till bubble then add in sugar sheetSent from my LG-H990 using Tapatalk 1 Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Mahesh Posted March 20, 2018 SRC Member Share Posted March 20, 2018 Hi Bro, My No3 also very high. Can share how to control using sugar and vinegar? What is the proportion need to use for mixing? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Add vinegar to cool down sugar water till 1 L. Then shake to mixSent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Hi Bro, My No3 also very high. Can share how to control using sugar and vinegar? What is the proportion need to use for mixing? Thanks in advance. Hi bro, need to get some data from you first.1. Your total tank volume2. Your NO3 level now3. You running refugium or chaeto 4. You using any PO4 and NO3 reactor5. Are u using skimmer for nutrients export?Sent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Mahesh Posted March 20, 2018 SRC Member Share Posted March 20, 2018 Just now, sherman said: Hi bro, need to get some data from you first. 1. Your total tank volume 2. Your NO3 level now 3. You running refugium or chaeto 4. You using any PO4 and NO3 reactor 5. Are u using skimmer for nutrients export? Sent from my LG-H990 using Tapatalk Hi Bro, my tank is 4 x 2 x 2ft. Total volume around 500Litres NO3 around 80ppm Just started cheato with light Also, started using BP reactor, not using Rowaphos as Phosphate is 0.03 Yes, I have Skimz skimmer Mine is Fish only with live rocks tank. No corals at all. Thinking to start Corals, thats why trying to bring down the NO3. Quote Link to comment Share on other sites More sharing options...
sherman Posted March 20, 2018 Author Share Posted March 20, 2018 Hi Bro, my tank is 4 x 2 x 2ft. Total volume around 500Litres NO3 around 80ppm Just started cheato with light Also, started using BP reactor, not using Rowaphos as Phosphate is 0.03 Yes, I have Skimz skimmer Mine is Fish only with live rocks tank. No corals at all. Thinking to start Corals, thats why trying to bring down the NO3. Yr PO4 measure by Salifert or Hanna?Sent from my LG-H990 using Tapatalk Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.