Jump to content

WTG 3FT Tank

oceanviper

By oceanviper,
in Sell off/Pasar Malam Shop

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

HI there.

I have a 3ft x 2ft x 1.5ft ( 1/2 inch glass ) no bracing for non-fuzzy taker.

The display tank and sump tank are only slight about 1 year plus ( setup in Feb 2013 ).

The tank maker shop located at Kelantan Rd.

Cabinet was reused from the previous reefer bought as 2nd hand.

Tank and sump redo due to dislike center overflow ( changed to side overflow ) and sump tank ( due to equipment placement ).

The tank still in use where I'm shifting the corals and fish to the new setup.

Collection by 12April2014

After 12 April 2014 will be go into rubbish bii for disposal.

Taker has to arrange own movers.

Location is Hougang area.

post-16802-0-56516900-1396483103_thumb.j

Left side white pieces is screw on to place my power socket which will be remove and reuse in my new setup.

post-16802-0-11128300-1396483104_thumb.j

Piping remains except skimmer and return pump

Ikea 3ft light (warm color) will be included.

post-16802-0-61014700-1396483104_thumb.j

  • Like 3

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi there.

Received quite number of PMs and please do consider on the mover part as the tank itself is heavy with 1/2inch glass.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi there.

Is reserved to bro spkentchai.

Thanks for the interest and will let the next person on the list.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

3ft is just nice and not too small for his house.... :thumbsup:!

Haha...

I have been stick to 3ft due to area size available.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The tank is now release to the next person on the list ( nickykoo ) and waiting for confirmation.

Do take note the tank will be clear by 12th April 2014.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The tank is now release to the next person on the list ( nickykoo ) and waiting for confirmation.

Do take note the tank will be clear by 12th April 2014.

Now reserved for nickykoo.

Any changes will updates and just to highlight that tank will be dispose by this Sat.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer Nickykoo decided to opt out, so now is back to available and will be discard by this Sat 12pm ( latest ).

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The main tank is using 12mm glass, so is no kidding and you need atleast 2 person to handle the tank.

Minimum vehicle needed to transfer is a MPV with all rear seats down...

The tank still in operation due to slight delay from my new tank setup.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

PM replied.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Tank reserved to reefer gilwy123 for him to arrange transport updates by tomorrow.

I apologize for the rush and also limited time to make arrangement.

Thanks for viewing my post

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

All pm replied.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer gilwy123 is confirming the timing with his mover for the tank.

At such I'm throwing in one pump of 4500l/hr at no cost.

Any changes will update in the forum.

Apologize for the delay reponse and thanks for viewing.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer gilwy123 will be coming tomorrow night for the collection.

The tank is ready to collect.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Just something which I'm able to give in allowing other reefer to make full use of it.

Since the tank is using 12mm glass, will require some moving cost where my ways of giving will help in minimize the overall cost.

Happy reefing....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer decided not to take due to size too big.

At such, the tank has gone to dispose area with the help of the cleaner.

Hi Mod, please help close this thread.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Received some PMs and also smsed on the tank set for immediate collection after updated disposed.

I'm sorry that those whom able to arrange transport asap for pickup at the dispose area are unable to do so.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...