Jump to content

WTG 3FT Tank

oceanviper

By oceanviper,
in Sell off/Pasar Malam Shop

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

HI there.

I have a 3ft x 2ft x 1.5ft ( 1/2 inch glass ) no bracing for non-fuzzy taker.

The display tank and sump tank are only slight about 1 year plus ( setup in Feb 2013 ).

The tank maker shop located at Kelantan Rd.

Cabinet was reused from the previous reefer bought as 2nd hand.

Tank and sump redo due to dislike center overflow ( changed to side overflow ) and sump tank ( due to equipment placement ).

The tank still in use where I'm shifting the corals and fish to the new setup.

Collection by 12April2014

After 12 April 2014 will be go into rubbish bii for disposal.

Taker has to arrange own movers.

Location is Hougang area.

post-16802-0-56516900-1396483103_thumb.j

Left side white pieces is screw on to place my power socket which will be remove and reuse in my new setup.

post-16802-0-11128300-1396483104_thumb.j

Piping remains except skimmer and return pump

Ikea 3ft light (warm color) will be included.

post-16802-0-61014700-1396483104_thumb.j

  • Like 3

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi there.

Received quite number of PMs and please do consider on the mover part as the tank itself is heavy with 1/2inch glass.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi there.

Is reserved to bro spkentchai.

Thanks for the interest and will let the next person on the list.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

3ft is just nice and not too small for his house.... :thumbsup:!

Haha...

I have been stick to 3ft due to area size available.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The tank is now release to the next person on the list ( nickykoo ) and waiting for confirmation.

Do take note the tank will be clear by 12th April 2014.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The tank is now release to the next person on the list ( nickykoo ) and waiting for confirmation.

Do take note the tank will be clear by 12th April 2014.

Now reserved for nickykoo.

Any changes will updates and just to highlight that tank will be dispose by this Sat.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer Nickykoo decided to opt out, so now is back to available and will be discard by this Sat 12pm ( latest ).

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The main tank is using 12mm glass, so is no kidding and you need atleast 2 person to handle the tank.

Minimum vehicle needed to transfer is a MPV with all rear seats down...

The tank still in operation due to slight delay from my new tank setup.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

PM replied.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Tank reserved to reefer gilwy123 for him to arrange transport updates by tomorrow.

I apologize for the rush and also limited time to make arrangement.

Thanks for viewing my post

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

All pm replied.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer gilwy123 is confirming the timing with his mover for the tank.

At such I'm throwing in one pump of 4500l/hr at no cost.

Any changes will update in the forum.

Apologize for the delay reponse and thanks for viewing.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer gilwy123 will be coming tomorrow night for the collection.

The tank is ready to collect.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Just something which I'm able to give in allowing other reefer to make full use of it.

Since the tank is using 12mm glass, will require some moving cost where my ways of giving will help in minimize the overall cost.

Happy reefing....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Reefer decided not to take due to size too big.

At such, the tank has gone to dispose area with the help of the cleaner.

Hi Mod, please help close this thread.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Received some PMs and also smsed on the tank set for immediate collection after updated disposed.

I'm sorry that those whom able to arrange transport asap for pickup at the dispose area are unable to do so.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 1

      WTS Rocks

      Sold. Sent from my SM-S918B using Tapatalk
      Blue Reefer in Sell off/Pasar Malam Shop
    2. 0

      wts 322ft tank

      i have a 3x2x2 tank for sale with bracing sump and shed comes with media etc selling at -$245 pm if interested or whatsapp 88604nine64
      Wynob in Sell off/Pasar Malam Shop
    3. 0

      Reliable and ultra quiet pumps for sales 1000L and 1350L eheim and sicce

      Reliable and ultra quiet pumps for sales 1000L and 1350L eheim and sicce 1.Sicce 1350L - $30 retail $65 can pump up to 2m height 2.Eheim compact 1000L - $30 retail $60? Good for keeping as spare pump for iOS tank or emergency Do not Pm me as I seldom login https://api.whatsapp.com/send?phone=6592954138 Collect at ubi or paya lebar mrt
      equiox in Sell off/Pasar Malam Shop
    4. 0

      SFU西蒙弗雷泽大学毕业证成绩单Q/微457202606加拿大SFU毕业证本科毕业证硕士毕业证加拿大学历文凭原版制作Simon Fraser University

      SFU西蒙弗雷泽大学毕业证成绩单Q/微457202606加拿大SFU毕业证本科毕业证硕士毕业证加拿大学历文凭原版制作Simon Fraser University 【如已删除请点网页快照】Q/微信457202606专业办理毕业证成绩单,真实教育部学历学位认证,使馆回国人员证明.毕业文凭，学位证书，结业证，Diploma，官网可查，永久存档(诚招代理） ◆◆◆◆◆----------------【远洋教育】留学归国服务中心-----------◆◆◆◆◆ 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金 【选择远洋，联系karl，为您解决无法毕业的学历烦恼】 学历咨询顾问karl QQ：457202606 微信：457202606 【主营项目】 一.毕业证、成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！ 二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查） 四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) ------------------◆◆◆◆◆------不成功不收费------◆◆◆◆◆----------------- -----------◆◆◆◆◆实体公司,安全放心，可以来公司面谈签订合同◆◆◆◆◆------- ◆◆◆◆◆远洋留学服务中心!实体公司！注册经营！行业标杆！精益求精！◆◆◆◆◆ 【业务选择办理准则】 一、工作未确定回国需先给父母、亲戚朋友看下文凭的情况。办理一份就读学校的毕业证文凭即可 二、回国进私企、外企、自己做生意的情况这些单位是不查询毕业证真伪的而且国内没有渠道去查询国外文凭的真假也不需要提供真实教育部认证。鉴于此办理一份毕业证即可 三、进国企银行事业单位考公务员等等这些单位是必需要提供真实教育部认证的办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验快捷的绿色通道帮您快速整合材料让您少走弯路。 ------------------ 联系人：karl QQ/微：457202606-------以上联系方式敬请保留，以备急用，诚心合作，真诚制作！！欢迎新老客户咨询办理！！
      sg2wa5s in Disease treatment/parasite/pest control
    5. 0

      补办UTS毕业证成绩单Q/微457202606悉尼科技大学毕业证学位证文凭学历认证留学认证教育部认证1:1制作电子图修改GPA成绩University of Technology Sydney

      补办UTS毕业证成绩单Q/微457202606悉尼科技大学毕业证学位证文凭学历认证留学认证教育部认证1:1制作电子图修改GPA成绩University of Technology Sydney【如已删除请点网页快照】Q/微信457202606专业办理毕业证成绩单,真实教育部学历学位认证,使馆回国人员证明.毕业文凭，学位证书，结业证，Diploma，官网可查，永久存档(诚招代理） ◆◆◆◆◆----------------【远洋教育】留学归国服务中心-----------◆◆◆◆◆ 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金 【选择远洋，联系karl，为您解决无法毕业的学历烦恼】 学历咨询顾问karl QQ：457202606 微信：457202606 【主营项目】 一.毕业证、成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！ 二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查） 四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) ------------------◆◆◆◆◆------不成功不收费------◆◆◆◆◆----------------- -----------◆◆◆◆◆实体公司,安全放心，可以来公司面谈签订合同◆◆◆◆◆------- ◆◆◆◆◆远洋留学服务中心!实体公司！注册经营！行业标杆！精益求精！◆◆◆◆◆ 【业务选择办理准则】 一、工作未确定回国需先给父母、亲戚朋友看下文凭的情况。办理一份就读学校的毕业证文凭即可 二、回国进私企、外企、自己做生意的情况这些单位是不查询毕业证真伪的而且国内没有渠道去查询国外文凭的真假也不需要提供真实教育部认证。鉴于此办理一份毕业证即可 三、进国企银行事业单位考公务员等等这些单位是必需要提供真实教育部认证的办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验快捷的绿色通道帮您快速整合材料让您少走弯路。 ------------------ 联系人：karl QQ/微：457202606-------以上联系方式敬请保留，以备急用，诚心合作，真诚制作！！欢迎新老客户咨询办理！！
      sg2wa5s in Disease treatment/parasite/pest control
×
×
  • Create New...