Jump to content

nitrates dropped, phosphate not dropping, why!


ml708
 Share

Recommended Posts

  • SRC Member

I did several water changes and I think I have removed close to 100% of my old water in the tank by now.

This reduced my nitrates to 2ppm from a ridiculous 24ppm.

However my phosphates are still at 4.5ppm. Rowaphos does not seem to have helped either.

I feed half the amount I normally feed to reduce nitrate and phosphate buildup and still have this reading.

Can anyone please advise me what to do? My duncan is absolutely hating it!

Link to comment
Share on other sites

  • SRC Member

Presence of phosphate in liverocks...

Check the reliability of your test kit too..

ok, is there any way I can remove the phosphate in the live rock? strange that it would be present in the rocks because I had the rocks for quite a few months, and the phosphate level was something like 0.04ppm

Link to comment
Share on other sites

  • SRC Member

How long has The Rowa Been Added?

Nitrates And Phos..work hand in hand

Try Checking Your Reacter Water Output..If it does Show..Phosphates..that means your rowa is exhausted..Changing would be good..But if no trace of phosphates..should be ok.

Rowa is preety good..drops phosphates fast..

Cheers!

Btw What Test Kit?

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Hi, the surest, cheapest and fastest way to reduce your phosphate is by using lanthanum chloride together with using a 10 micron filter sock. Search the net for the proper dilution to water. If indeed your rocks are leaching PO4, it would take some time to rid it of po4. Good luck.

Link to comment
Share on other sites

  • SRC Member

I use D-D test kit. Changed rowa about a week ago. Output seems to be fine and levels there are low, which is strange. Btw what's this about lanthanum chloride and where can one get it? Is it harmful to fish and corals?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...