SRC Member ml708 Posted February 10, 2014 SRC Member Share Posted February 10, 2014 My flashlight fish are really big eaters, and it has affected the water quality to the extent that my duncan does not want to open. I did water changes and now he is opening more again. How do you frozen food feeders keep your nitrates and phosphates down? A really annoying side effect is also that my skimmer goes into overdrive and keeps churning out foam at an incredible rate after feeding. Any way to prevent this? Quote Link to comment Share on other sites More sharing options...
Jenaellyn Posted February 11, 2014 Share Posted February 11, 2014 I use polyp lab. Expensive but it works Quote Link to comment Share on other sites More sharing options...
SRC Member ml708 Posted February 11, 2014 Author SRC Member Share Posted February 11, 2014 I use polyp lab. Expensive but it works thats the brand, what food from polyp lab do you use? Quote Link to comment Share on other sites More sharing options...
Jenaellyn Posted February 11, 2014 Share Posted February 11, 2014 it is not food. i dose polyp lab rf-genesis, rf-plus, rf-acids and rf-fuel Quote Link to comment Share on other sites More sharing options...
ramonc Posted February 11, 2014 Share Posted February 11, 2014 My chaeto do the job Quote Link to comment Share on other sites More sharing options...
SRC Member ml708 Posted February 11, 2014 Author SRC Member Share Posted February 11, 2014 where do you keep your chaeto? many people keep in the sump but don't you have to install an additional light source for that? also nitratEX apparently is only for use with freshwater systems O_o Quote Link to comment Share on other sites More sharing options...
ramonc Posted February 11, 2014 Share Posted February 11, 2014 Quote Link to comment Share on other sites More sharing options...
blusafe Posted February 23, 2014 Share Posted February 23, 2014 You've probably already tried this...but do you thaw and wash the food with RO water before feeding? Quote Link to comment Share on other sites More sharing options...
Sengreef Posted February 23, 2014 Share Posted February 23, 2014 carbon dosing is totally useless for a heavy feeding tank ... my duncan fully open inside my PO4@0.34 & NO3@80 water without a problem ... Quote Link to comment Share on other sites More sharing options...
SRC Member ml708 Posted February 23, 2014 Author SRC Member Share Posted February 23, 2014 You've probably already tried this...but do you thaw and wash the food with RO water before feeding? no I have not, its a really good idea. but will it wash away the nutritive value? Quote Link to comment Share on other sites More sharing options...
SRC Member angmoh Posted February 23, 2014 SRC Member Share Posted February 23, 2014 for me, oversize skimmer + refugium + reef-resh + biosphere + rowaphos Quote >> Link to comment Share on other sites More sharing options...
Jarrod Ward Posted February 23, 2014 Share Posted February 23, 2014 Interested in the comment on washing the frozen food. How do you do this? I feed a frozen mixed food from lfs, and when i break up under water i see a lot of film and tiny particles. Appreciate any advice from Blusafe or other reefers. Thanks! Quote ** Coming Soon ** 4x2x2 from Oceansing 1) Red Sea Max 130D Stunner LED strip 24v 453nm Actinic Blue 2) 130liter nano from Pasir Ris... generic, but fun! 3) 300mm cube tank Ecoxotic Par 38 tri-colour, PAR38 Aquarium LED 6-453nm Blue 4-6500k 2-Red Eheim-Compact 600 Return Pump Link to comment Share on other sites More sharing options...
megacue Posted February 23, 2014 Share Posted February 23, 2014 Can use a fine nest to seperate the food from the thawed water. Then soak it in a garlic guard for few minutes if u want. Sent from my SM-N9005 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jket88 Posted February 27, 2014 Share Posted February 27, 2014 for me, oversize skimmer + refugium + reef-resh + biosphere + rowaphos Bro , u have so many items and equipment to keep ur nitrate low. Quote Link to comment Share on other sites More sharing options...
Tony LCW Posted March 19, 2014 Share Posted March 19, 2014 Should not, as washing only clean the outer surface. no I have not, its a really good idea. but will it wash away the nutritive value? Quote Link to comment Share on other sites More sharing options...
Sonicsound Posted June 1, 2014 Share Posted June 1, 2014 Over size skimmer is the best Quote Link to comment Share on other sites More sharing options...
SRC Member kfc Posted August 5, 2014 SRC Member Share Posted August 5, 2014 Biosphere and two reactor Quote Link to comment Share on other sites More sharing options...
SRC Member james72 Posted August 5, 2014 SRC Member Share Posted August 5, 2014 I thaw the frozen cubes with some of my tank water. Then throw away the water n dump every thing in so the slower n shy gobies can also feed on them. My flow is strong enough so whatever uneaten will overflow to my skimmer. Those escape the skimmer will either follow return pump back to tank or stuck at a corner for my hermits to feed in my ios. Water quality will drop with such feeding if your bio-filteration is not enough. I use the old school way of dsb and live rocks half the size of my main tank for biofilteration purposes. So far my No3 & po4 are consider low for my feeding regimen Cheers, James Quote Cheers, James Reviving my reef tank : Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS) Life Reef HVS3-24 with mazzei venturi ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus) ZET Light 3 x 3w LEDs moonlight Arctica 1/3 Hp + 1/4 Hp back up Vortech mp40w x 3 + Jebao wp25 Eheim 1264 x 3 + water blaster 5000 Vortech back up battery TLF-150 + Rowaphos Activated carbon Kamoer 3 channel + CaCl2 + NaHCo3 150L Refugium with DSB, miracle mud, cheato 2ft T5 x 2 light tubes for refugium Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.