Clem's Clam Corner

[Clement Chen]

I think I go see if I can find a thick plywood ba. Acrylic can use? Later e ply wood rot cause of e water

[Clement Chen]

Thanks for all ur advices. I managed to get a hold.of 19mm plywood to be used. Question should I get 2 pieces? Or 1 will do. Also will it rot due to e water?

[Kakani]

Would prefer you get another stand and also salt water density and liverock we put in main tank will stress the glass. Sometime it better to be safe then sorry

Sent from my GT-I9505 using Tapatalk

[Clement Chen]

Anyone know who does custom stands? And also how much they cost?

[Clement Chen]

Sighs.. didnt know this would be such a big issue. My tank maker kept assuring me it will be ok as my tank is very light no problem

[Admiraltian]

Anyone know who does custom stands? And also how much they cost?

U can try contacting Vincent, aquarium artist.

[kenyee]

Bro, if u deem that its light, u can try doing this way..u can go to my tank thread to see my sump auto top up tank..same dimension 60x40x30..my 10cm of the tank is hanging in the air..

Just that for u, as DT, it dun really look good..cheers

[Clement Chen]

Bro, if u deem that its light, u can try doing this way..u can go to my tank thread to see my sump auto top up tank..same dimension 60x40x30..my 10cm of the tank is hanging in the air..

Just that for u, as DT, it dun really look good..cheers

Thanks bro, that is good to hear! Whew have been quite worried. I will place 2 x 19mm plywood under my tank just to be safe. Although not that nice, but bo bian, now budget tight. Maybe my next tank can make sui sui with cupboard. haha thanks everyone for their concern!

[pinglow]

Your tank support will hold. Unless your tank is made with acrylic. A glass tank should hold. Furthermore its 10mm.

[Clement Chen]

Just finished all my piping and filled it up with water. Special thanks to ken from madpetz for his patience and his time in helping me get my piping running.

I was running the LR in my sump tank before this and after a week my ammonia and nitrites were 0. Nitrates were 50ppm

My DIY ATS, waiting for my red leds from taobao. Red on one side, the other is the current spiral bulb for my refugium as well. FR is with rowa and carbon, intend to do away once ATS and chaeto are in.

[ASHWIN]

bro Where You Get The RedBamboo Algae?

Thanks.c

Cheers!

[Clement Chen]

Almost there!

[sherman]

Bro,

What is the big pipe doing outside your stand?

[Clement Chen]

Bro, What is the big pipe doing outside your stand?

That one to temporarily hold my light for my refugium.

[ReDDeviLs]

maintain your skimmer more frequently because algae and diatoms will grow on the inside

[sherman]

That one to temporarily hold my light for my refugium.

I see.

[Clement Chen]

Some sneak previews

My yellow polyps are growing everywhere. Anyone wants a free frag?

[erikokelf]

Nice gesture, very generous bro

Sent from my C6903 using Tapatalk

[Clement Chen]

A FTS update, corals are opening up nicely, SPS are showing good PE

And of course what is a clam corner without a clam from AM

[Admiraltian]

U might wanna consider shifting that birdnest on the left side, right in front of the return pipe. Too much direct flow on it.

[Clement Chen]

Ok thanks! Will do.

Bro u letting go any more sps frags?

[hanafi_weeseng]

Nice meatly brain coral u have

[Clement Chen]

Can anyone help me ID is that a super sun at the bottom right?

Have been trying to get it to open in e morning with the bottle and shrimp, now only opening at night. It only opens to eat and closes again.

Few more sticks from nice reefers.

[james72]

Yes that is a super sun.....they normally open at night or during fish feeding at day

Sent from my GT-I9300 using Tapatalk

[Clement Chen]

Some updates. Have been trying to raise kh, keeps staying around 7dkh, Have been increasing dosage but still barely hit 8dkh. Calcium around 420

Also just got a Maxspect 120w 16k