Jump to content

Removing encrusted monti from LR


Recommended Posts

Hi reefing bros & sis,

My red monti growing & encrusted on my large piece of incline rockwork. Juz wondering if there's any method to remove it without actually destroying & killing the monti?

Posted Image

Any advises will be appreciated, thanks for reading.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Can you remove the rock?..trimming it would be good...or just breaking..once encrusted they are quite hard..to remove with out injuring.btw Sweet monti! :D

Cheers!

  • Like 1

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Can you remove the rock?..trimming it would be good...or just breaking..once encrusted they are quite hard..to remove with out injuring.btw Sweet monti! :D

Cheers!

Dun think I will remove the rock as there r other corals & sps glued to it and it's actually quite a big boulder piece. So I can't remove it as I dun wanna disturb the other corals. Anyway thanks for ur suggestion.

Try using a chisel and chisel your way around the monti.Juz suggesting

:D

Dats a nice monti,haven't seen one before,where'd you get it?It's on my wish list since I started

:P

Can't really chisel it off. I tried using a scraper & coral cutter to scrap it off & it's quite brittle & breaks in small pieces easily. Dun wanna do that as it will cause more damage. Thks for ur suggestion though.

My monti from GO, those 3 for $100 sps. It grew from ~3" in diameter colony to 3 big colonies ard 4-5" where I placed in different location in my tank. If u like, I can break a small frag for u. Pls PM me.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Anyone knows?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Up

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

He wants the whole coral. If you can't chisel,what can you do? :o
He wants the whole coral. If you can't chisel,what can you do? :o
I think it will be tough to remove. Maybe I try cutting off bit by bit.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Dremel tool
Sorry, bro but I dun hv this tool.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • Sponsor

I often have similar issues with plating montipora. As their skeleton is relatively fragile, they will fracture and break before you can remove them in one piece. Sometimes you are lucky and the joined area is small enough to chip off with a small screw driver (or similar), but this has rarely been the case for myself. Normally, I just try to get big pieces off and start new colonies. If they like the tank, they will grow away quickly.

Jamie

Jamie Vande

Vertex Aquaristik

Cologne, Germany

www.vertexaquaristik.com

jamie@vertexaquaristik.de

Link to comment
Share on other sites

  • SRC Member

You can't dremel underwater in the first place. Imo a wood knife (alternating spike version) would be enough to cut a v shape into the rock and remove the monti and a small piece of rock

Link to comment
Share on other sites

I often have similar issues with plating montipora. As their skeleton is relatively fragile, they will fracture and break before you can remove them in one piece. Sometimes you are lucky and the joined area is small enough to chip off with a small screw driver (or similar), but this has rarely been the case for myself. Normally, I just try to get big pieces off and start new colonies. If they like the tank, they will grow away quickly. Jamie
You can't dremel underwater in the first place. Imo a wood knife (alternating spike version) would be enough to cut a v shape into the rock and remove the monti and a small piece of rock
Thanks for the advise, will give these methods a try. Thanks again.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • 4 weeks later...
there's really no real way to remove it 100% completely w/o injuring it. dont worry it will grow back nicely with the right condition...
Guess I can only trim off excess edges to downsize it. Thanks.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

×
×
  • Create New...