Jump to content

For led DIY pple.


LittleBurger
 Share

Recommended Posts

  • SRC Member

The "full spectrum" chip on board led.

I think most of the led light fixture have the single colored led, installed in an array.

Pple have been saying abt disco light effect. So I guess some light fixtures utilize those "bug eye" reflectors to spread out the light. And some have to install the light fixture higher above the water surface to have a better light spread.

So chanced upon this led. Looks great. Theoretically it should be better than having each individual color led installed. http://www.ledgroupbuy.com/lumia-5-1-100w-full-spectrum-5-channel-led/

Am not saying this led is good but aquarium led tech is still evolving and I just feel the multi chip would be able to mimic that single source of a mh.

For those who like to DIY, maybe u would like to try this type of chip. Can also google on chip on board led or multi chip.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Had been very intrrested in the DIY. but the cost add up will almost same as a razor light set. You will need PSU, LDD, 5up board, heat sink, fan, LED and a controller. Shipping from US quite x too. Pro for DIY will be individual part is modular so if thing go wrong, can be easily replace.

Sent from my SM-N9005 using Tapatalk

Link to comment
Share on other sites

  • SRC Member
Had been very intrrested in the DIY. but the cost add up will almost same as a razor light set. You will need PSU, LDD, 5up board, heat sink, fan, LED and a controller. Shipping from US quite x too. Pro for DIY will be individual part is modular so if thing go wrong, can be easily replace.Sent from my SM-N9005 using Tapatalk
i making plans to change my gen1 radion. I want to have an end to led cluster upgrade. Machiam copy iPhone style marketing. Am sourcing new light fixture. Just something to have sunrise n set effect with full spectrum will do. Dun find the need to change color ever so often since corals will be stressed by the changes.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

i making plans to change my gen1 radion. I want to have an end to led cluster upgrade. Machiam copy iPhone style marketing.

Am sourcing new light fixture. Just something to have sunrise n set effect with full spectrum will do. Dun find the need to change color ever so often since corals will be stressed by the changes.

Haha....your Radion can grade to Pro G3 mah...!

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member

Haha....your Radion can grade to Pro G3 mah...!

I can't convince myself to pay 600 for led clusters, Warranty on these clusters nia. Furthermore if g3 pro. Expect to pay 700-800 for this. 700 for vortech pump im good but not this nonsense.

Also the disco light effect... If ecotech comes out with a better led design that solves this then I may upgrade. But just not dumping 600 n more for changing of led colors. No way...

If follow the radion marketing style, from g1 to g3 I can change to a custom made acrylic tank.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

I can't convince myself to pay 600 for led clusters, Warranty on these clusters nia. Furthermore if g3 pro. Expect to pay 700-800 for this. 700 for vortech pump im good but not this nonsense.

Also the disco light effect... If ecotech comes out with a better led design that solves this then I may upgrade. But just not dumping 600 n more for changing of led colors. No way...

If follow the radion marketing style, from g1 to g3 I can change to a custom made acrylic tank.

Yap true..7~800 can get new AI Hydra but DIY not cheap too..lol!

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member
Yap true..7~800 can get new AI Hydra but DIY not cheap too..lol!
after my trip back from Taiwan in mar, will get my new light set n do a FR.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS : Live Rocks with Coraline Algae

    2. 0

      Looking for berghia nudibranch & carpet anemone

    3. 0

      格里菲斯大学申请学校Griffith毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证Griffith University

    4. 0

      康涅狄格大学毕业证丢失UCONN毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单 University of Connecticut

×
×
  • Create New...