Jump to content

Crystal pro di unit problem


rudy17
 Share

Recommended Posts

Hey bros.. jus bought the above di unit from iwarna today. Fixed the hose connector to my tap but water leaking from the connector.. am I missing out on something?

Also what do I do with the parts in the bag? Sorry for the noob questions.. this set should come w instructions!

Sent from my GT-N7105 using Tapatalk

post-22556-138747065797_thumb.jpg

post-22556-13874706975482_thumb.jpg

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Did u put the rubber or plastic o-ring inside the connector? This is to prevent water leaking out from faucet via connector.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Where you bought the hose connector from?

The leak is from the tap to the hose connector or from the yellow pipe? If connector than make sure there is rubber o ring in it.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

Leak problem solved after I bought a metal connector from madpetz. The hose connector came w the di unit (bought at iwarna).

But now tds reading still about 50 despite adding a valve to slow down the water flow. :(

Anyone has similar issues?

Sent from my GT-N7105 using Tapatalk

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Could be the resin problem.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

I managed to achieve 0 TDS with this unit.

slow drip is the key,and also let the water run through the resin ~1/2hr before use.

Do you have a photo of the metal connector? Mine tends to leak in the form of small drips whenever I on the tap. Its leaking from the part connecting the hose to the plastic connector.

Link to comment
Share on other sites

Hi bro heres the pic..Bro admiraltian, what could be wrong w the resin? Bought brand new leh...Sent from my GT-N7105 using Tapatalk
I think there's a thread somewhere regarding crystal pro resin some batches unable to achieve 0 TDS reading. Basically could be the new resin has "expired" even without it been used before. Try changing a new one to see if there's any improvement. I also facing the connector slight leaking problem thru the 3/4" yellow hose at the connector joint. Couldn't find the same garden hose connector that I bought last time. I only using crystal plus 1 stage. Might go to Madpetz to see if they hv. I think my tap faucet (screw in type) is 22mm in diameter.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Thanks bro..found the thread!

Madpetz should have the garden connector. Got mine from there.

I will probably try new resins and see if it works. Thanks again

Sent from my GT-N7105 using Tapatalk

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Thanks bro..found the thread!Madpetz should have the garden connector. Got mine from there.I will probably try new resins and see if it works. Thanks againSent from my GT-N7105 using Tapatalk
No problem. Let's see if the new resin is better.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

    2. 0

      办理!!美国MU毕业证*成绩单@Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

    3. 0

      办理!!美国BU毕业证*成绩单@Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

    4. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

    5. 0

      UofM Diploma毕业证,曼尼托巴大学毕业证——Q微信751558146¥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Manitoba

×
×
  • Create New...