Jump to content

Crystal pro di unit problem


rudy17
 Share

Recommended Posts

Hey bros.. jus bought the above di unit from iwarna today. Fixed the hose connector to my tap but water leaking from the connector.. am I missing out on something?

Also what do I do with the parts in the bag? Sorry for the noob questions.. this set should come w instructions!

Sent from my GT-N7105 using Tapatalk

post-22556-138747065797_thumb.jpg

post-22556-13874706975482_thumb.jpg

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Did u put the rubber or plastic o-ring inside the connector? This is to prevent water leaking out from faucet via connector.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Where you bought the hose connector from?

The leak is from the tap to the hose connector or from the yellow pipe? If connector than make sure there is rubber o ring in it.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

Leak problem solved after I bought a metal connector from madpetz. The hose connector came w the di unit (bought at iwarna).

But now tds reading still about 50 despite adding a valve to slow down the water flow. :(

Anyone has similar issues?

Sent from my GT-N7105 using Tapatalk

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Could be the resin problem.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

I managed to achieve 0 TDS with this unit.

slow drip is the key,and also let the water run through the resin ~1/2hr before use.

Do you have a photo of the metal connector? Mine tends to leak in the form of small drips whenever I on the tap. Its leaking from the part connecting the hose to the plastic connector.

Link to comment
Share on other sites

Hi bro heres the pic..Bro admiraltian, what could be wrong w the resin? Bought brand new leh...Sent from my GT-N7105 using Tapatalk
I think there's a thread somewhere regarding crystal pro resin some batches unable to achieve 0 TDS reading. Basically could be the new resin has "expired" even without it been used before. Try changing a new one to see if there's any improvement. I also facing the connector slight leaking problem thru the 3/4" yellow hose at the connector joint. Couldn't find the same garden hose connector that I bought last time. I only using crystal plus 1 stage. Might go to Madpetz to see if they hv. I think my tap faucet (screw in type) is 22mm in diameter.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Thanks bro..found the thread!

Madpetz should have the garden connector. Got mine from there.

I will probably try new resins and see if it works. Thanks again

Sent from my GT-N7105 using Tapatalk

Moorish Idol has to be the most beautiful fish ever! :thumbsup:

Link to comment
Share on other sites

Thanks bro..found the thread!Madpetz should have the garden connector. Got mine from there.I will probably try new resins and see if it works. Thanks againSent from my GT-N7105 using Tapatalk
No problem. Let's see if the new resin is better.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 5

      WTS Fish

    2. 0

      挂科gpa过低BCIT毕业证书Q/微993398773乔治布朗学院大学毕业证成绩单文凭学历认证留信认证教育部认证1:1本科硕士毕业证制作电子图修改GPA成绩George Brown College

    3. 0

      学术不端UOW毕业证成绩单Q/微993398773卧龙岗大学毕业证学位证文凭学历认证留学认证教育部认证1:1本科硕士毕业证制作电子图修改GPA成绩 University of Wollongong

    4. 0

      堪萨斯大学毕业证正版KU毕业证成绩单Q/微993398773办理美国大学毕业证成绩单留信认证留服认证教育部认证回国证明假学历制作文凭制作University of Kansas

    5. 0

      挂科gpa过低McGill毕业证书Q/微993398773麦吉尔大学毕业证成绩单文凭学历认证留信认证教育部认证1:1本科硕士毕业证制作电子图修改GPA成绩McGill University

×
×
  • Create New...