Jump to content

Redsuns Newbie Nano Tank


redsuns
 Share

Recommended Posts

  • SRC Member

Hi everyone, after dabbling in freshwater (CRS,KK,WR shrimps, planted, topical fishes) for 3-4 years, I finally took the courage to go into salty territory. :) Cost was of course a big factor to consider as I am still pretty green in the working world, so I took the combination of combining of reusing my freshwater equipment and SRC's very own pasar malam. Met a few nice reefers who are very willing to share and answer my newbie questions.

A snapshot of my setup:

Tank: ANS Opticube (Crystal Glass - 60cm x 30cm x 36cm)

Light: Maxspect G2 160W

Filtration 1 : Eheim Pro 2 2028 connected in series to Atman CF1200(dummy)

Filtration 2 : Eheim Pro 2226 connected in series to Atman CF600 and Eheim Classic 2213

Filtration 3 : Totto Perfect Filter S size

Skimmer: Red Sea Prizm Deluxe

Chiller : Teco RA 200 1/10HP

Wavemaker: Fluval SEA CP1

Substrates: CaribSea Arag-Alive Bahamas Oolite (20lbs) + CaribSea Ocean Direct Oolite (10lbs)

Rock: 2 pieces, 4kg & 6kg

Currently cycling with Brightwell Aquatics Microbacter7

Pictures coming soon... :)

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

Posted Image

Posted Image

Posted Image

Posted Image

Sent from my iPhone using Tapatalk

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

Thanks guys, hoping to learn from the friendly seniors here :)

Sent from my iPhone using Tapatalk

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

Look simple & neat. Now all u hv to do is to wait til cycling is complete.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Haha...yeah! Looking forward to an exciting journey ahead! :)

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

I like the shape of the rocks. Looks like got a valley

Thanks bro, I think so too. :)

Power lah. 5 filter n ur must hardworking.

Haha, I was quite kiasu previous when I was keeping CRS, as I have a space constrain in terms of the size of tank, the next best thing I could do is to increase the volume by increasing my filtration. Having a sump is bound to have folks at home making noise, so I stick to these canisters and hopefully it will come good. No choice, have to be hardworking for hobby. haha :)

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

Nice rock shapes! A few pointers from me : - remember to clean all ur filters at least once a month! If you can do it twice a month that's the best. Canisters are nitrate factories if you don't clean them. -your sand looks too deep. I'll just leave 1-1.5 inch at most. Too deep and you'll encounter problems in the long run. My 0.02cents

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

Nice rock shapes! A few pointers from me :- remember to clean all ur filters at least once a month! If you can do it twice a month that's the best. Canisters are nitrate factories if you don't clean them. -your sand looks too deep. I'll just leave 1-1.5 inch at most. Too deep and you'll encounter problems in the long run. My 0.02cents

Thanks for the pointers! Yup I heard about the nitrate factory thingy..will try to clean often..haha

My sand is around 4-5cm, care to share what might be the potential problem? Is it the possible release of ammonia or other harmful gases might be accumulated ?

Thanks

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

hi bro

nice rock scape , looks like you are going for the valley concept. what corals are you planning to keep?

welcome to this exciting hobby. like you, I am also quite new & also tried to convert a fresh water tank into a marine without sump.

just to share - pls double check for any leakages (last thing you wanto is to come home to a soaped floor)

Link to comment
Share on other sites

Me too am a nano tank player, 34 liters to be exact. haha.

For me because my tank is so small, I cannot depend on mechanical/Chemical filtration. So Bio filtration (live rock and sand) is our only option. And since our water volume is so small. Water change is key. I change water up to 2 times a week. 3 liters each time. haha (easy for me since my water volume smaller then others ATO tank =X) The water changes should keep all your parameters in check.

Invest in some good salt. It will last you a long time. Water change is key.

Also dose your bacterial religiously.

And welcome to this hobby.

Link to comment
Share on other sites

  • SRC Member
hi bro nice rock scape , looks like you are going for the valley concept. what corals are you planning to keep? welcome to this exciting hobby. like you, I am also quite new & also tried to convert a fresh water tank into a marine without sump. just to share - pls double check for any leakages (last thing you wanto is to come home to a soaped floor)
Thanks bro, looking to keep some softies and easy corals for a start. Still do not have specific ones but will thread carefully when I go lfs shopping. You are so right, I sent my canister to change the primer o-ring as it was leaking from there..lucky my father discovered it when I was away from home.
Me too am a nano tank player, 34 liters to be exact. haha. For me because my tank is so small, I cannot depend on mechanical/Chemical filtration. So Bio filtration (live rock and sand) is our only option. And since our water volume is so small. Water change is key. I change water up to 2 times a week. 3 liters each time. haha (easy for me since my water volume smaller then others ATO tank =X) The water changes should keep all your parameters in check. Invest in some good salt. It will last you a long time. Water change is key. Also dose your bacterial religiously. And welcome to this hobby.
Haha thanks for the pointers bro! I initially wanted to start with around 34 litres but decided to go with 64 litres instead. :) Judging on the water I made for my canisters, my entire water volume should be around 80 plus litres, without taking into consideration of rocks and sand though. I am using Red Sea Coral Pro right now.

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

Nice looking valley. May the force be with you. Thumbs UP!

Thanks! Certainly need the "force"

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

Got my Pinpoint PH Meter and I have the following airbubble in the probe. Anyone of other reefers have this as well?

Posted ImagePosted Image

I asked the LFS which I bought from and also reef depot, they said the gel like solution inside with air bubble is normal. I have checked with a couple of people, they dun have this in their probe though.

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

  • SRC Member

My ph is around 7.7-7.8. Seems a little low? How should I bring it up? I was looking at adding bacteria king as my media,will it help? The media looks big though got my canister.

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

Hi bro, welcome here. I am also quite new to this hobby and was running a planted tank since last year dec. Learnt and gain alot of experience from aquatic quotient! If you are looking for a quiet reef setup, I will recommend you look into the durso piping for the overflow. The durso piping will eliminate the sucking sound when water flow down into the sump. After the overflow and down into the drain pipe, ensure that the drain pipe is below the water surface and you will have minimum noise. Basically only the sound of bubbles. As for the skimmer, you can try the bubble magus curve series which is very silent. You will only hear it if you open your tank cabinet door. For the return pump, the eheim 1250 that I am using produces a vibrating sound which cannot be heard when sitting about 2m away.

Tank: 3.5ft x 2ft x 1.5ft, 12mm

Sump: 3ft

Skimmer: Bubble Magus Curve 7

Lightings: Maxspect 15000k

Return Pump: Eheim 1252

Wavemaker: Jebao WP25, Jebao RW-8

Link to comment
Share on other sites

  • SRC Member

Very Nice bro! Amazing! :)

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

  • SRC Member

Thanks bro, that will definitely be in my consideration for my next setup!

Thanks, its nothing compared to the other bros here. Haha

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

Hi,

Nice setup..

Simple and Neat..

What are your current water parameters?

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

  • SRC Member

Hello!

Ammonia :0

Nitrite:0

Nitrate:5-10ppm

PH: 7.8

Tank Size: 3.5 ft x 2 ft x 2 ft
Sump: 3ft x 1.5ft x 1.5ft”
Return Pump: Eheim 1264
Chiller Pump: H2Ocean Flow Pump 3000
Skimmer: Vertex Alpha 200
Wavemakers: 2 X Maxspect Gyre 130; 1 x Ecotech VorTech MP10WES, 1 x Ecotech VorTech MP40WES, 1x Jebao RW15
Filtration: Schuran Multifilter 100 (Rowa Phos), Two Little Fishies Phosban 150 Fluidised Reactor (Vertex Rox 0.8 Carbon), Enductor Fluidized Reactor- FR45 (NP Biopellets & All In One Biopellets) with Eden 140 Pump, Santa Monica Hogx1 Algae Turf Scrubber, Cheato
Calcium Reactor: Skimz CM152 with needle valve and Maxijet 600 feed Pump (CaribSea ARM Extra Coarse ,KZ Coral Gravel, Two Little Fishies Reborn, Grotech Magnesium Pro)
Dosing: Bubble Magnus Dosing Pump BM-T01 + 2 x 4 Head Expansion Accessory BM-T02
Bio Media: Marine Pure, Bacteria King, Eheim Substrat Pro, Eheim Substrat, Seachem DeNitrate, PowerHouse Hard, Polyplab Biosphere, Seachem Purigen

Chiller: JBJ Arctica Titanium Aquarium Chiller (1/3 Hp - DBE-150)
Lighting: ATI Powermodule 6 x 39 Watt T5. Solite 4 x 39 Watt T5 (Only 2 used) (Blue+ Blue+ Coral+ Purple+ Coral+ AB Special) (Blue+ Purple+)
Auto Top Up system: Tunze Osmolator Universal 3155 Auto Top Off
Monitoring: 2 x Milwaukee MC 122 PH Controller (Calcium Reactor & PH Monitoring)

Substrate: CaribSea Aragamax Select

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      格里菲斯大学申请学校Griffith毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证Griffith University

    2. 0

      康涅狄格大学毕业证丢失UCONN毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单 University of Connecticut

    3. 0

      西蒙菲莎大学未正常毕业SFU毕业证书Q/微993398773办理加拿大大学毕业证成绩单留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证Simon Fraser University

    4. 0

      悉尼科技大学申请学校UTS毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证University of Technology Sydney

    5. 0

      旧金山大学毕业证丢失USF毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单University of San Francisco

×
×
  • Create New...