Jump to content

quas111's beast tank 2013


Quas111
 Share

Recommended Posts

  • SRC Member

Hi guys, the 4ftx2.5fx2ft is arriving later today within the next hour! Ill make sure its image intensive so watch out ;)

I plan to make it a mix reef tank, with no coral focus in mind. Probably keeping softies, lps, sps, and maybe even nps, and not to forget fishes too!

Link to comment
Share on other sites

  • SRC Member

Posted Imagethis is the side fts which Justin's (from iwarna) did. (THANKS :D)

Im gonna edit it to my preference amd maybe rescape, and take more photos of it when the water is less cloudy

  • Like 1
Link to comment
Share on other sites

  • SRC Member

Sorry for slow updates! I was very busy cleaning up the mess. More photos:Posted Image this is the sump window. Theres already some macro algae given by iwarna

Posted Image the vertex skimmer. It has been barely 6 hours and the skimmer is already skimming out lots of skimate. Its impressive. I guess thats what you can expect with a german skimmer :P

Posted Image

This is the front sump shot. The cabinet has doors on the front and the back so theres also gonna be a back tank shot. Im sure you can see I am using a 1/4 hailea chiller. I know its pushing the limit for the chiller but I guess its ok for now

Posted Image thats the back sump shot. Theres a fluid reactor running rowaphos and a jebao 9000 pump leading to the main tank, and a smaller pump(idk what brans) leading to the fluid reactor

Posted Image this is the front tank shot. I havent rescaped yet

Posted Image

thats the back tank shot.

Link to comment
Share on other sites

  • SRC Member

Nice!! Must be super excited!

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Sorry for slow updates! I was very busy cleaning up the mess. More photos:uqyvudu7.jpg this is the sump window. Theres already some macro algae given by iwarna

tu8e9e2u.jpg the vertex skimmer. It has been barely 6 hours and the skimmer is already skimming out lots of skimate. Its impressive. I guess thats what you can expect with a german skimmer :P

uvaryhes.jpg

This is the front sump shot. The cabinet has doors on the front and the back so theres also gonna be a back tank shot. Im sure you can see I am using a 1/4 hailea chiller. I know its pushing the limit for the chiller but I guess its ok for now

ere8usev.jpg thats the back sump shot. Theres a fluid reactor running rowaphos and a jebao 9000 pump leading to the main tank, and a smaller pump(idk what brans) leading to the fluid reactor

nejuha2e.jpg this is the front tank shot. I havent rescaped yet

7ajy3yme.jpg

thats the back tank shot.[/quote

Nice tank, great sump and good skimmer.

Link to comment
Share on other sites

Hi guys, the 4ftx2.5fx2ft is arriving later today within the next hour! Ill make sure its image intensive so watch out ;) I plan to make it a mix reef tank, with no coral focus in mind. Probably keeping softies, lps, sps, and maybe even nps, and not to forget fishes too!
That will be a real challenge keeping a mixed reef keeping a vast variety of corals happy. Happy reefing!!

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Parking here for updates!!

Sent from my GT-I9505 using Tapatalk

:ThanxSmiley: I won't be updating much during the cycle time there's gonna be a wait!

awesome! Cant wait to see it up n running

:thumbsup: Camping here for updates. Planning for this tank size as well.

Ooh haha nice to see another reefer whose gonna make a tank of this size. I haven't seen anyone else with a tank this size :wacko:

Nice!! Must be super excited!

Sent from my GT-N7105 using Tapatalk

Of course I am :yahoo: It took so long for the tank to be finalized and arrive

:ThanxSmiley: Thanks! I'll probably add more mangrove-type algae to the sump

haha thanks! I'll enjoy... the cycle time a lot...... :whistle

:ThanxSmiley:

Definitely! I like a challenge :thumbsup: and I guess it will be a change from the usual focused tanks lol

:thanks:

err... I'm no sure of the pump I don't see the label but I think it was an ehiem pump :dunno:

Link to comment
Share on other sites

  • SRC Member

Done! Its not so easy to see what I have done but I hope you get the idea....

Fts:

Posted Image

Bts:

Posted Image

Front close ups:

Posted Image

(The cave)

Posted Image

(The other side)

Posted Image

Back tank shot closeups:

Posted Image

(The back of the cave)

Posted Image

(Back of the hill thing)

Posted Image

I also found this nice little tubeworm who unfortunately wont survive cycling

Posted Image

Link to comment
Share on other sites

  • SRC Member
Done! Its not so easy to see what I have done but I hope you get the idea.... Fts: a8apegeh.jpg Bts: a3u5anuv.jpg Front close ups: ejytudaq.jpg (The cave) aza5y9ub.jpg (The other side) 7a2e5aza.jpg Back tank shot closeups: ge3yju2y.jpg (The back of the cave) re8ape7y.jpg (Back of the hill thing) 5e7ybyje.jpg I also found this nice little tubeworm who unfortunately wont survive cycling papehy6y.jpg
The cave is nicely done but there will be a dead zone inside. Right side island i notice some rocks are rather near to the glass. That might make cleaning difficult. Just my personal view
Link to comment
Share on other sites

  • SRC Member

Nice scaping.. many caves n holes for fishes to hide n swim thru.. the concept of 2 islands is wonderful..

Thanks!

Nice scaping ....your skimmer looks powerful

 

Always so exciting to have a new tank..  congrats bro

Yeah its definitely exciting! Thanks!

I like the scaping, very natural.

Its natural? Wow I didn't notice lol. Thanks!
Link to comment
Share on other sites

  • SRC Member

The cave is nicely done but there will be a dead zone inside. Right side island i notice some rocks are rather near to the glass. That might make cleaning difficult. Just my personal view

actually I did consider the dead zone in the cave, so I made it such that the water being sucked into the lower chamber. I put sinking food in that area to see if it will trap detritus and it didn't, so im not sure it will still be a problem...

And the area where the rocks are near the wall is accessible by an algae scraper so im fine with cleaning it.

I haven't gotten my wave maker yet if you haven't noticed, so im unsure if the water dynamics would change later. Thanks for the advice though!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      滑铁卢大学申请学校UW毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Western Ontario

    2. 0

      新南威尔士大学毕业证丢失UNSW毕业证成绩单Q/微993398773办理澳洲大学毕业证学位证留信认证留服认证教育部认证回国证明澳洲本科学位证硕士文凭成绩单University of New South Wales

    3. 0

      多伦多大学申请学校UT毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Toronto

    4. 0

      亚利桑那大学未正常毕业UA毕业证书Q/微993398773办理美国大学毕业证成绩单留信认证留服认证教育部认证回国证明美国本科文凭硕士学位证毕业证 University of Arizona

    5. 0

      悉尼大学毕业证丢失USYD毕业证成绩单Q/微993398773办理澳洲大学毕业证学位证留信认证留服认证教育部认证回国证明澳洲本科学位证硕士文凭成绩单University of Sydney

×
×
  • Create New...