Jump to content

Rescaping - 3 feet(L) x 1.5 feet(W) x 2 feet(tank)


Fitzgerald Dizon
 Share

Recommended Posts

bro, is the pH and Alkalinity unusually high?

Hi Bro,

The correct parameters based from the article I read are as follows:

PH should be between 8.1 ~ 8.3

Alkalinity between 7~11 dKH.

I am still on my 6th day cycling the tank and will keep monitoring water parameters.

Based from this article: http://reefkeeping.com/issues/2005-03/rhf/#9

"if the pH is above 8.5 and the alkalinity is not above 4 meq/L, then the aquarium is not fully equilibrated with carbon dioxide in the air."

But my alkalinity is above 4 meg/L, so i'm still reading more on this.

For alkalinity, I will start doing 5% water changes and continue to monitor.

Hope anyone can also provide inputs on this.

  • Like 1

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Way the go, bro. Nice scape, hope to see more corals & fishes soon.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

My 2 cents would be since ur on ur 6th day of cycle, just leave the tank be and don't test for anything until it's cycled and ready for corals :) the only variable u could test is ANN.

This way u could prolong ur test kit's life span. During this cycle, ur tank will naturally equilibrate itself. Dont be worried about other parameters. Only when ur Ammonia & Nitrite is 0, then best u do a WC then tweak other parameters such as Ca & Alk for corals and such.

Hope this helps. And cheers!

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

Way the go, bro. Nice scape, hope to see more corals & fishes soon.

Thank you very much sir.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

My 2 cents would be since ur on ur 6th day of cycle, just leave the tank be and don't test for anything until it's cycled and ready for corals :) the only variable u could test is ANN.

This way u could prolong ur test kit's life span. During this cycle, ur tank will naturally equilibrate itself. Dont be worried about other parameters. Only when ur Ammonia & Nitrite is 0, then best u do a WC then tweak other parameters such as Ca & Alk for corals and such.

Hope this helps. And cheers!

Your advice is great and I will be able to save alot for the other test kits.

I will take this by heart and proceed other parameter testings after ANN are 0.

Thank you very much!

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

At this point just test your Amonia till it drop to zero.

Then you test your NO2 till it drop to zero.

Lastly test your NO3 till almost zero

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Water Parameters as of 2013/11/28

Salinity: 1.025

Ammonia: 0.0 ppm

Nitrite: 0.50 ppm

Nitrate: 10 ppm

Ph: 8.1

Alkalinity: 9.3 dKH or 3.30 meq/L

So far so good, right?

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Nice scaping

Sent from my iPhone using Tapatalk

Thank you for the comment..

Once everything reach 0 for ANN..

Will be adding corals and fish soon..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Water parameters as of December 3, 2013

Salinity: 1.024

Ammonia: 0.0 ppm

Nitrite: 0 ppm

Nitrate: 0.2 ppm

Ph: 8.0

Alkalinity: 12 dKH

Phospate: 0 ppm

Calcium: 440 ppm

Magnesium: 1140 ppm

Should be ok to start putting coral frags, digi and or monti's?

Kindly advice.

Thanks.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

  • SRC Supporter

IMHO, do a 10% water change and adjust your PH to 8.3 or so before putting in any LS. Also, add LS minimally and not a sudden increase as this would create imbalance to the parameters again due to nutrients exporting and absorbtion.

Link to comment
Share on other sites

Alk too high and mg a little low. I'll try to target 8-9 dkh and 1400mg

Noted on this.

Thank you sir.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

IMHO, do a 10% water change and adjust your PH to 8.3 or so before putting in any LS. Also, add LS minimally and not a sudden increase as this would create imbalance to the parameters again due to nutrients exporting and absorbtion.

Thank you sir for the advice.

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Try to watch out for your KH. Don't let it go up some more.

MG is way too low. Pump it up to around 1350

PH also low.

Do a 30% water change to bring now your N03

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Water Parameters as of December 09, 2013

Salinity: 1.025

Ammonia: 0.0 ppm

Nitrite: 0 ppm

Nitrate: 10 ppm

Ph: 8.2

Alkalinity: 10 dKH

Phospate: 0 ppm

Calcium: 430 ppm

Magnesium: 1250 ppm

Already performed two 20% water changes and added Red Bamboo algae together with my chaeto in my refugium.

I still cant bring down Nitrate.

Any tricks of the trade or advice?

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Remember patience bro for the well being of long term success. =)

Thanks bro...

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Do note..

That changing of water might also bring up ur Kh level

Kh Level is the most important in terms of mag..

If Kh level is screwed up..then u got problem in balancing mag and calcium

Kh, Mg and Calcium all stable except Nitrate..

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Try to watch out for your KH. Don't let it go up some more.

MG is way too low. Pump it up to around 1350

PH also low.

Do a 30% water change to bring now your N03

Performed two 20% water changes.

NO3 still 10 ppm. :(

Display Tank Size : 3 Feet x 1.5 Feet x 2 Feet

Sump Tank Size: 2.5 Feet x 1.5 Feet x 1.5 Feet

Skimmer: Reef Octopus NW-150-6530

Size(mm) : Diameter 150 x 580 HT

Foot print : 300 x 200

Air intake : 450L/H

Pump Power : 2000 38W

Max. size of the tank : 800L

Installation: In sump

Main pump: Hydor L40

Lights: 1 x 150 Watts Metal Hallide

1 x 24 Watts 2 Feet Actinic Blue T5

1 x 39 Watts 3 Feet Actinic Blue T5

Wavemakers: 1 x Jebao WP25

1 x Sunsun JVP201

1 x Tunze 6025

Mini Carbon Reactor: Media ROWA Carbon

Mini Phosphate Reactor: Media ROWA Phos

In-sump Refugium: ( Chaeto )

In-sump: Coral Chips

Bio Balls

Ceramic Rings

Chiller: Hailea 1/4Hp HC-300A

Soon to add:

Deltec NF 511 Sulphur Nitrate Filter Reactor

Upgrade MH to LED light

Link to comment
Share on other sites

Try to change about 50% for 2 to 3 rounds and run biopellet or/and biosphere . NO3 very hard to bring down once it buildup.

Have patience

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

I use brightwell reef biofuel in conjunction with microbacter7 to bring down my nitrates & phosphates.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...