crystal+ pro

[christan1959]

Hi anyone using crystal+ pro 3stage DI water purifier? My set does not seem to work well. Still producing 40ppm water after half hour of running. New set. Appreciate advice.

[Keith khoo]

adjust to minimum discharge outlet flow. let it flow over night

[christan1959]

OK thanks bro. Will try.

[Boonboy]

There is another thread discussing the exact issue. You may like to refer to it for solution.

My guess is the resin that comes with a new set is expired!

[christan1959]

After dripping overnight,reading drops to 25ppm. Still not good enough leh. NTUC Pure bottled water is 7ppm!

[christan1959]

someone in previous thread said to try MAXIMUM flow to achieve low TDS reading. a bit confused.

[christan1959]

After 30hrs of drip, still 40ppm. Tried high flow, also doesn't work. Give up. Going to petmart to change resin tom.

[Boonboy]

After 30hrs of drip, still 40ppm. Tried high flow, also doesn't work. Give up. Going to petmart to change resin tom.

Yes, you should. I am using the same DI set and got 0~2 TDS after changing the resin(at full blast).

[sherman]

Change the resin and you will get zero reading

[Keith khoo]

yup change your resin and filter.

[christan1959]

Changed resin. Best reading is 15ppm. Checked with Aquamarin, which uses Crystal Pro too, and they say cannot get zero reading. Anyone who uses this product and CAN get zero reading?

[Keith khoo]

madpet

[christan1959]

Hi Keith, madpetz resin can be used in crystal pro canisters?

[Evolutionz]

can,get the fillable cartridge, just tell madpetz that ur using for crystal pro.

[christan1959]

Thanks bro.

[RCA]

Thanks bro.

Hi bro so did it work?

[RCA]

Cause im getting my on sat