Jump to content

Nano Thermoelectric Aquarium Chiller


Patrick
 Share

Recommended Posts

  • SRC Member

Got one 1 pic of the inside. Comes with 2 internal fans to cool the fins and 1 exhaust fan.

The stock setup is --> fin | fan | fin | fan --> exhaust fan and blowing in 1 direction.

Thought the first fan blowing hot air into the second fin was inefficient and tried modding it by placing the fans blowing away from the cooling fins. No improvements at all, and also adding more fans proved insignificant.

attachicon.gifDSC_1312.JPG

Wow... this is very similar to what I had in mind for a DIY setup. You mean even with the Sunon fan blowing adjacent to the PC fans is insufficient?

Link to comment
Share on other sites

  • SRC Member

Yes, no difference even with the sunon fan beside the fins to give extra cooling. The only things I modded were to upgrade both fans to a higher amp for more power, and added an extra intake fan behund to suck in air into the chiller. The config is like this now: intake fan/fin/fan/fin/fan -->exhaust fan. I also added an external fan to blow at my water surface to aid in cooling the tank faster. the fan will cut off when the chiller cuts off. Will take a pic later.

Sometimes the good guys gotta do bad things to make the bad guys pay. - Harvey Specter

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Member

There is no difference which is the inlet or outlet. Just ensure that you secure the hose tightly to prevent leakage.

Also take note to calibrate the chiller if necessary as the default factory temp had a 1'C difference from real temp.

Sometimes the good guys gotta do bad things to make the bad guys pay. - Harvey Specter

Link to comment
Share on other sites

I'm using this chiller. IME this chiller is more suitable for smaller tanks <40L despite it saying that it can support up to 60L.

I've managed to cool it down to 26.5'C on my 55L. But it takes 1 hr to kick in, and 1 hr to cool the tank by 1'C.

Hi bro,

I thought this chiller can only set 1 degree different so how can you set it to 26.5?

Btw, I have tested and confirmed that this chiller is more suitable for <45Ltank if wanted to cool down 26 or low. Maybe 280W version can do the job better.... :evil: !

For my tank, I have almost the same spec as your but I set it to 27 instead as I only plan for LPS and blennies/gobies nia.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...