mp10wes or tunze 6095 :)

[hammy]

Im very undecided haha.

Will u go for 2 x 6095 or 2 x mp10wes for your nano tank. 2 feet cube.

Share your thoughts

[Anthony]

Bro, Try 2 x WP25. Very good for 2ft cube.

Cheap n Good IMHO.

[Evolutionz]

Agree on the wp25 anyway 2ft cube I believe 1 wp25 + one smaller wave maker is enough. If u want only the Tunze or vortech, go with tunze. They are dead silent. The mp10 gets really noisy after some time.

[hammy]

Bro, Try 2 x WP25. Very good for 2ft cube. Cheap n Good IMHO.

Agree on the wp25 anyway 2ft cube I believe 1 wp25 + one smaller wave maker is enough. If u want only the Tunze or vortech, go with tunze. They are dead silent. The mp10 gets really noisy after some time.

Hee.... Many people advice me on the wp....

[sunny03]

Get abyss ... one pump settle everything. .. you can have as many outlets as you want to your tank.... many directional flow... Later upgrade to bigger tank also no issue

[tansh]

I use 1 wp25 with else mode and 1 mp10 on full speed fix mode on my 2x1.5x2 ft tank.

[hammy]

Get abyss ... one pump settle everything. .. you can have as many outlets as you want to your tank.... many directional flow... Later upgrade to bigger tank also no issue

10 years warranty.... Anyway my tank maker and friends already talk me out of that ideas le lah

[hammy]

I use 1 wp25 with else mode and 1 mp10 on full speed fix mode on my 2x1.5x2 ft tank.

Thanks tansh. How is the mp10 on full power? Noisy? Wave enough?

[ivanlim]

mp10 on full power for a 2ft is more then enough and yes, it does gets abit of noise and i suppose is when keep using full blast and bearings wear-off at the dry side.

[Kelvin81]

I using mp10 for 2x2x2.5, even full blast I barely can see wave effect.. unless I switch lower down my return pump power (DC pump). I opt for 2 tunze. Reason cost effectiveness. Tunze can tilt.. but need to bare with the downside of the wire inside your tank and heat generated inside your tank. Mp10 won't add heat to your tank and neater.

[tansh]

Abit of noise due to full power and been using for 1 yr.The noise can be hear 2ft away from the dryside motor so still acceptable.Might need to dismentle the motor to svc the bearing when i free.If u really want wave go for wp25 and u wont regret

Thanks tansh. How is the mp10 on full power? Noisy? Wave enough?

[Endorrachua]

seriously speaking, 2ft cube with a strong return may even suffice. spent your money in other more useful equipments or consumables.

[hammy]

seriously speaking, 2ft cube with a strong return may even suffice. spent your money in other more useful equipments or consumables.

I'm using dd h2ocean 5000 already. Tee to chiller and FR I need random flow though Thanks bro

[Evolutionz]

wp25 is the way to go! use the rest of the money spend on lighting better

[hammy]

wp25 is the way to go! use the rest of the money spend on lighting better

Thanks bro Evo. I spend the money on a set of AI vega already. Only Headache is wavemaker. My nanotank is pretty set. All equipment bought with sponsor already

[angmoh]

I'm using Tunze 6055 + controller on my 2ft tank. Just nice !

Let's put the durability aside, WP25 is value for money.

If you ask me to choose between Tunze and Vortech, my vote goes to Tunze

[Evolutionz]

if got extra money to spend, definitely go for the tunze + controller. the best you can get.

[hammy]

Thanks for all the input. Manage to get 2 very new vortech mp10 at good price. Will be trying that out first. Thanks for all the advice. My concern is the wire in the tank....

[evomclaren]

Nice

[hammy]

Hi guys... My tank is finally coming on wed! I'm wondering where Should I place the 2 mp10es in a 2 feet cube. They re not wes so will not sync.

[MarcoVan]

Opposite each other. One reef crest mode one lagoon.

[braincoral]

Mp10 got this stalled issue..

Green and red light blinking. .