Jump to content

Which light is better??


Recommended Posts

  • SRC Member

if u meant for a tank that is 2ft tall, you'll have to hang it high to cover the whole area. or you can choose to hang it lower, then both sides will be pretty dark or have shadowing. Can go down to west coast aquarium to check out their display tank.

No harm to have a look.. will do so. West coast aquarium is the 1 near ntuc? inside market?

Link to comment
Share on other sites

  • SRC Member

i would say 2 pharos with 60 degree lens or 3 pharos with 80 degree . if got $ , best go with 3 :thumbsup:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

60 degree is very narrow and should use 3 sets. 80 degree is wider so 2 sets might suffice. But might have shadowing especially if u have a middle bracing.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

For LED, price aside, do look out for support. Buying overseas is cheap but that is provided you have means to get support. Otherwise, it may be penny wise pound foolish. Prioritise your buying consideration to narrow down your choice, otherwise you will be flooded with Suggestion. For 4 ft, razor 160w and mitra are supposed to be able to support 3ft. The rest, mostly support 2ft. So it seems like you need 2 sets for all brands(available in sg market) unless you going for supplement. LED has high start up cost but save on long run. If you are going into sps and serious about it, then your choice may be limited to few proven brands which can keep it survive and color up your spses. The other options of MH & T5 are still available but cost on the running and consumables like bulb are high.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

60 degree is very narrow and should use 3 sets. 80 degree is wider so 2 sets might suffice. But might have shadowing especially if u have a middle bracing.

ops. yup i meant 2 sets with 80 degree and 3 sets with 60degree. ps , typed wrong

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

take a look at

he is using full pharos led for his tank. he also got it direct from china.

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Pharos LED -

4 x Cree XPE Blue: 3W/piece
- 12 x Cree XPE Royal Blue: 3W/piece
- 2 x Cree XPG warm white: 5W/piece
- 6 x Cree XPG neutral white: 5W/piece

Though with the use of warm white and neutral white is a good choice, no Violets at all would be a major down side. violets (true or hyper violet) are very important to corals. and they bring the POP color out in luminous corals.

And i agree with solo77, buying from overseas is cheaper but have to consider about warranty issue. If you happen to buy and use after 1-2 months and module died or controller spoilt, there is nothing you can do buy to buy another set.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

they do provide violet led , but with an additional cost of 10$ for each violet

they provide 1 year warranty , and was told they will cover the shipping cost if we were to send back china for warranty.

the module and controller is seperate sale. and this are cheap especially the controller X:

in terms of price when buying here in sg , pharos is much more expensive than razor 160w :chair:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

they do provide violet led , but with an additional cost of 10$ for each violet

they provide 1 year warranty , and was told they will cover the shipping cost if we were to send back china for warranty.

so either the orignal leds will have to be swapped out? If they honor what they told you. Then i guess it will be a good buy. Care to pm me the price too? Thanks

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

yah , original leds will have to be swapped out. example orignally comes with 4 blue. can swap with 4 violet.

bro clee also did the same , swapped some colours of the led to the colour he wants.

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Out of curiosity, why not T5s? Maybe a ati sunpower? Think many seniors here are using them and probably a very proven light set for all sorts of corals, esp SPS

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Certain luminous color of the sps probably need the spectrum that T5s can provide.. Nonetheless, agreed about the cost, just bought a razor myself too. Haha

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

Just got the razor only. Gonna tryout supplementing it with e old Aquazonic T5s, keeping just e blue actinic bulbs, which I intend to switch to ati bulbs soon..will monitor the photoperiod n hopefully it wan be a overkill n I won't run into algae n bleaching problems.. Will post updates in my thread in u wanna find out about e effects :)

Follow Alex's Reefing Journey @ 

 

 


 

Link to comment
Share on other sites

  • SRC Member

the heat and power consumption is high :cheers:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

agree ! yup dont use aquazonic.

Atleast get a lightset that has ( individual reflector )

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...