Jump to content

angmoh's 2ft REEF REEF tank

angmoh

By angmoh,
in Members Tank & Specs

 Share

Recommended Posts

  • SRC Member
angmoh Newbie

angmoh

Posted
  • SRC Member
Posted

Tank Description

Display Tank: 61(L) x 61(W) x 50(H) cm

Sump Tank: 70(L) x 50(W) x 38(H) cm

Reservoir Tank: 60(L) x 50(L) x 45(H) cm equipped with Tunze 6015 for circulation

Chiller: Artica 1/5hp

Light: Maxspect Razor 120W (Hanging)

Skimmer: Deltec 1455 (for tank up to 1000litres)

Wavemakers: Tunze 6055 with controller

Return Pump: Jebao DC (4000litres)

Others: Osmolator 3155, Biopellets, Rowaphos

>>

Link to comment
Share on other sites
  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Admiraltian
Admiraltian

What the lights height clearance from your water surface? Seems quite high.

nicreef
nicreef

very nice planning bro..btw whats the fencing at the sump for?

MarcoVan
MarcoVan

67 in Bukit Panjang area

wilsontantw Newbie

wilsontantw

Posted
Posted

Looks good... and keep the photos update coming.

Hope u don't mind these opinions:

1. The exhause fan... do you think it will be more effective if the fan sucks air from the cabinet and blows it out instead of blowing air in? Also, preferably to automate such that the fan is turned on when chiller is running. Else it will be a waste of electricity.

2. Given u have done up a nice looking tank, would the grey pvc pipe in the DT stand out like a sore thumb amongst the nice corals or fishes?

Pls pardon my frank opinion. This pipe hole, is at the base of the main DT, could potentially be the weakest link/joint of the tank.

In the mean time... enjoy the journey!!!

decommissioned 2.5x2x2

Videos:

|
|

Your mind is like a parachute. It only works when it is open.

Link to comment
Share on other sites
  • SRC Member
angmoh Newbie

angmoh

Posted
  • Author
  • SRC Member
Posted

Hi wilsontantw,

Thank you for your kind suggestion/remarks.

As I have created a huge opening directly in front of the chiller, I hope the hot air will dissipate out of the cabinet. The blower is meant to provide air circulation within the cabinet to blow out the hot air (hopefully) and to cool down adapters.

I'm looking at that as well. Probably need to go sim lim to look for the temperature controller. Anyway the exhaust fan power consumption is negligible compared to chiller haha

I will remove the PVC pipe in the tank as it is redundant anyway. Need a strainer probably.

I'm not so worry about the hole as is just like the holes in ur overflow box haha

>>

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Neat and nice arrangement.

Will look better if you exhaust fan is install inside the cabinet then outside.

Pardon me for my opinion.

Happy Reefing

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
wilsontantw Newbie

wilsontantw

Posted
Posted

Yo... glad u have thought of it already.

Just 1 additional thought. The hot air is going to be dissipated from the rear of the chiller. I.e. hot air will stay within ur cabinet. With the exhaust fan blowing in, it will force the hot air out the front hole. Now the chiller is drawing hot air instead of cool air.

Thats just theoretically speaking of course.. in real world im not a thermal scientist or physicist. So I could be wrong.

Do keep the updates coming. Hope to see more nice pix!

decommissioned 2.5x2x2

Videos:

|
|

Your mind is like a parachute. It only works when it is open.

Link to comment
Share on other sites
Admiraltian Collaborator

Admiraltian

Posted
Posted

What the lights height clearance from your water surface? Seems quite high.

  • Like 1

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites
  • SRC Member
angmoh Newbie

angmoh

Posted
  • Author
  • SRC Member
Posted

Yo... glad u have thought of it already.

Just 1 additional thought. The hot air is going to be dissipated from the rear of the chiller. I.e. hot air will stay within ur cabinet. With the exhaust fan blowing in, it will force the hot air out the front hole. Now the chiller is drawing hot air instead of cool air.

Thats just theoretically speaking of course.. in real world im not a thermal scientist or physicist. So I could be wrong.

Do keep the updates coming. Hope to see more nice pix!

Wilson, the heat exchange for Artica chiller is at front? I hope it is. Otherwise I have to turn around the chiller. The idea is to have the heat discharge facing the opening

>>

Link to comment
Share on other sites
  • SRC Member
angmoh Newbie

angmoh

Posted
  • Author
  • SRC Member
Posted

What the lights height clearance from your water surface? Seems quite high.

About 30cm.. I haven really measured yet. Anyway will fine tune it when I start stocking. Still a long way to go...

Now the tank is running with fresh water

>>

Link to comment
Share on other sites
Admiraltian Collaborator

Admiraltian

Posted
Posted
About 30cm.. I haven really measured yet. Anyway will fine tune it when I start stocking. Still a long way to go... Now the tank is running with fresh water
Ok ok, I see. Happy reefing.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites
Admiraltian Collaborator

Admiraltian

Posted
Posted

Bro angmoh, the light from the refugium is gonna cause coraline algae growth on your skimmer. Hope u have taken some precaution. For mine, I wrapped aluminium foil around the skimmer's body.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites
  • SRC Member
angmoh Newbie

angmoh

Posted
  • Author
  • SRC Member
Posted

Bro angmoh, the light from the refugium is gonna cause coraline algae growth on your skimmer. Hope u have taken some precaution. For mine, I wrapped aluminium foil around the skimmer's body.

Ohh noted bro. Never thought of that. Thanks

>>

Link to comment
Share on other sites
resser Newbie

resser

Posted
Posted

You mean the comb? I'm planning to keep some not reef-safe fish in the refugium as well :)

You should have a 'hole' in the cabinet to look into the fuge. Nice design, me likey.

Materialism :- He who dies with the most toys, wins.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      〖国外毕业证书〗加拿大阿萨巴斯卡大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Athabasca University

      〖国外毕业证书〗加拿大阿萨巴斯卡大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Athabasca University 〖国外毕业证书〗加拿大阿萨巴斯卡大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Athabasca University 〖国外毕业证书〗加拿大阿萨巴斯卡大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Athabasca University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      vsf3423 in LPS Coral forum
    2. 0

      WTS/T Lumi GSP and Clove Colony

      Tree type lumi GSP and Green & Golden Clove
      theclown in Sell off/Pasar Malam Shop
    3. 1

      1Hp Chiller FS

      Price revise to $350..
      Edios in Sell off/Pasar Malam Shop
    4. 1

      Chaeto to Give Away - Postal Code 391030

      Chaeto to give away... Will throw by 24 Nov 2000hrs.
      Maverick77 in Swop Shop
    5. 0

      Clearing Space - Selling RBTA

      Clearing RBTA to reduce bio load. $4 per piece. Self-collect only at 30 Cassia Crescent
      Maverick77 in Sell off/Pasar Malam Shop
×
×
  • Create New...