Jump to content

first 4ft reef =]


Recommended Posts

  • SRC Member

Today , pre-ordered the jebao dc-6000 in fish-street for 161 $ ! Cant wait to arrive and upgrade my return pump :yahoo:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

added another 25kg of LR and rescape again . I was looking for the Y-split for a long time , cant find it in any lfs , thus bought it from ebay for $14 since i need it urgently , then 1 week later went to madpetz , there only sell 7$ :chair:

yesterday hooked up the biopellet also. Y splitted it , so should be about 1500L/hr flow rate or so and the pellets is tumbling alot(loudest noise from the tank).

tank abit cloudy now , should be cleared soon and nitrate is now 80. (very high) . no loss of lifestock for the time being and coral is doing well. hope the biopellet will bring it down by next week.

able to maintain consistent mg,cal,alk thanks to the dosing pumpp.

also bought the jebao dc6000 from iwarna. got a refund from fish-street since they out of stock for quite long and buying in sg is cheaper by 20$ :cheers: silent and powerful. running at max speed. loving it !

post-22536-0-07296100-1381157564_thumb.j

post-22536-0-66503800-1381157591_thumb.jpost-22536-0-13423200-1381157601_thumb.jpost-22536-0-97212400-1381157608_thumb.jpost-22536-0-05293600-1381157578_thumb.jpost-22536-0-03603300-1381158129_thumb.jpost-22536-0-27670100-1381157626_thumb.j

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

After setting all up, this is how it looks LOL

Bring all the heat produced outta my house.

Cant feel any heat surrounding at all. Satisfied xD

Cant imagine heat releasing into the house, the distance between tank and sofa is very near or heating up the sump tank after cooling

Also can help to dry my clothing faster outside..

:D

attachicon.gifrps20130911_102439.jpgattachicon.gifrps20130911_102844.jpg

Like the idea, now you let me think about better heat release for my new tank in new home.

Link to comment
Share on other sites

  • SRC Member

Like the idea, now you let me think about better heat release for my new tank in new home.

Haha i took it out because this idea doesn't Work due to the back pressure. Amd thr window is just above the chiller, and the heat is really negligible haha.

Upgraded the chilelr from hs66 to hs90a. It takes 36min to chill to 26degree instead of 1hour. Also added 2x54w delighting (blue+ and purple+) to supplement the colour. Nitrate drop to 40 from 80 in 1week. Hopefully will drop further to 0 LOL.

Hang the lighting by tying with copper wire. Love this t5 with the price!

The box made for this external themp controlllr is too bulky. Lazy to cut, so just left it as it is. Cant wait for nitrate to drop further more then chiong sps xD

post-22536-0-87993700-1381898879_thumb.jpost-22536-0-20940000-1381898894_thumb.jpost-22536-0-51905800-1381898907_thumb.jpost-22536-0-30135100-1381898918_thumb.j

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

I don't think copper wire is the best wire to use to hang. Not reef safe if it fails and drops into the water. I doubt it will fall, but you should have some safety measures in case it happens!

Link to comment
Share on other sites

  • SRC Member

I don't think copper wire is the best wire to use to hang. Not reef safe if it fails and drops into the water. I doubt it will fall, but you should have some safety measures in case it happens!

Actually wanted to hang to ceiling. But too much work. No worries! 101% wont drop! tied it every 20cm away, its very strong LOL frthermore lightset is not heavy hahah

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member
bro, nice reef tank.. to ask 36min to chill to 26 degreeC how long it cut-out and cut-in again?..Thks a lot..
Thanks bro. Not nice at all lah hhaha so EMPTY! erm, cool to 26degree in 36min , then chiller off for 1hr 56min then cool again. The flowrate used for this chiller is around 2000~2500L/hr. Btw anyone giving away chaeto? Preferably to be in tampines haha ( im lazy ) and will collect when i get my par38 for fuge in about 3weeks time

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Bro, dun b humble..nice to nicer..

Btw, a lot of kind reefers r giving cheato when harvest..do pm them..recently I just got cheato from kelvin81..his location is east side..

hahaha xD

okay will pm him LOL tyty :cheers::cheers::cheers::cheers::cheers::cheers::cheers:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Just joined the forum to know more about saltwater aquariums and chance upon your posts...awesome set-up u have there:):) congrats !! Was just wondering how much have you spent on your set-up so far ?? Just an estimate will do so that I know what I will be spending on in the future:/

Link to comment
Share on other sites

  • SRC Member

tank , sump , 2x pharos 90w and 2x54w delighting t5ho , substrate, 60 kgs liverocks , wp40 , sunsun wavemaker , hailea hs90a 1/2hp chiller , external temp controller , 6x 200micron filter socks , 1x filter socks holder , fr45 , 500ml biopellet , phosban 150 , 500ml rowaphos, all test kits , refractometer, hydrometer , pinpoint ph meter , 2 tesino 3000l/hr pump , jebao dc6000 pump , all the hoses , 2 Y-barb , skimmer sk201 , pvc pipes , dosing pumps , CA MG KH AC DI RESIN all 5litre additives , 23kg reddsea coral pro salt , rodi 5 stage , JBJ AUTO TOP OFF

just calculated ! total around calculated 4700~4800$. liverocks are all from reefers.

if all brand new , will go up to 5300~5500$. this is the price for EVERYTHING of equipment u need. cant think of any to add anymore.

tank is collected by own , if delivery is $120. tank stand made own , if not cabinet cost $700.

done :cheers:

im shocked too after calculated. OMGGGGGGGODDD :drunk2::chair: :chair:

initially i count is 2900$. slowly add in this and that another 2000$ without knowing. not including livestock. all the fish i bought that is stated in previous page cost $193. now u roughly will know :chair:

+ adding a par38 with holder for chaeto soon. + another $60 ( buy from supplier straight )

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

oh. the delighting 2x54w is come with any 2 ati tubes. and calculation is including the Flow Accelerator Swirl Eductor :thumbsup:

feel free to take a rough gauge from my calculation of how much i spend. if full tank set without equipment with tank (same dimension as me) , sump(same dimension) and cabinet with all the pipings and delivery done for you, its around $1400-$2000 depend who made the tank for you. :yahoo:

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

Actually wanted to hang to ceiling. But too much work. No worries! 101% wont drop! tied it every 20cm away, its very strong LOL frthermore lightset is not heavy hahah

I see that you are using bare copper wires to tie... have to watch out for corrosion... never under estimate the power of salt water!

Link to comment
Share on other sites

  • SRC Member

Woah, That's alot of money spent!! I was actually planning to budget my planning to be around 3k max :/ Thanks for the info!! Appreciate it!! You have been a great help:)

you can do it with less than $3k bro, but better equipment cost more :thumbsup: Youdontknowme is keeping more "advanced" corals so his set up costs more. You can cut down the costs a lot (etc. Buy second hand tank, &more second hand stuff). Don't let the cost be an issue! There is always a way! :)
Link to comment
Share on other sites

  • SRC Member

I see that you are using bare copper wires to tie... have to watch out for corrosion... never under estimate the power of salt water!

+1 on that! Maybe you could use cheap lacquer and coat the wire. Some hardware shops sell for $5 a can, and should be more than enough for your set up. Just need a paint brush to paint it on!
Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

never update for super long !

got a nudi outbreak at first , bought yellow coris to wipe them out but failed. then bought a melanurus wrasse which wipe them out. Also added 2x54W t5ho blue+ and purple+ , really like the led + t5 combo ! taking picture much easier with t5 on rather than led only.

added some sps , the speed im going super slow ! really broke LOL all bought with allowance only.

just realised there is colour difference between seeing pics in phone and lappy. colours in my lappy looks super fade ! overall tank still look very bare to me

attached some pics ~

green hammer

post-22536-0-05083400-1385821085_thumb.j

to

post-22536-0-82133600-1385821154_thumb.j

post-22536-0-46192100-1385821173_thumb.j

bubble coral

post-22536-0-75988300-1385821148_thumb.j

multi coloured brain

post-22536-0-87766500-1385821098_thumb.j

maxima

post-22536-0-11382200-1385821141_thumb.j

is this pink milli ?

post-22536-0-37633500-1385821120_thumb.j

what is this called ?

post-22536-0-44377700-1385821105_thumb.j

and this ?

post-22536-0-17016800-1385821113_thumb.j

fts

post-22536-0-63784200-1385821167_thumb.j

post-22536-0-01426000-1385821162_thumb.j

post-22536-0-85860400-1385821134_thumb.j

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

+1 on that! Maybe you could use cheap lacquer and coat the wire. Some hardware shops sell for $5 a can, and should be more than enough for your set up. Just need a paint brush to paint it on!

good idea !

I see that you are using bare copper wires to tie... have to watch out for corrosion... never under estimate the power of salt water!

agree ! will take super note on it

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • SRC Member

very Nice brain !

thanks ! one of my favourite piece !

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Nice multi-colored brain. Where did u get it?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

That Mille looked like Diablo millepora.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Nice multi-colored brain. Where did u get it?

Got it from a reefer who have just decom (:

That Mille looked like Diablo millepora.

okay thanks !

also just got 3 new frags ! purple tenuis, blue tenuis , and another dont know call what.

id ???

post-22536-0-56372000-1385828941_thumb.j

post-22536-0-33569600-1385828932_thumb.j

post-22536-0-12474700-1385828916_thumb.j

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling corals Zoas

    2. 1

      Coral Decom Sale

    3. 0

      WTS: Yellow oxide Zoa

    4. 1

      Coral Decom Sale

×
×
  • Create New...