Jump to content

MWT diy acrylic nano tank


Jameshong
 Share

Recommended Posts

55 buck.

You mean you get all the acylic and weld them yourself or fully assemble for S$55?

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

You mean you get all the acylic and weld them yourself or fully assemble for S$55?

Yap 55, acrylic sheet plus solvent . Tank only 51x34x20, 10mm nia.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

:agreed: I want to place an order ! Haha

Master of DIY, can start taking order for customize acrylic tank. Ha...

Sent from my iPhone using Tapatalk

:poster_oops: for own enjoyment and self satisfaction nia....paiseh not taking any order :( !

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member

Bro never take order but got work shop? I always wanna build something myself but too afraid of waking up with whole living room waiting to be mob.

Anyway your diy really no horse run.

Sent from my C6903 using Tapatalk

2x2x1.5

======

Maxspect Gyre

Maxspect Razer 120w 16k

H2O FR with Rowa

Eheim Universal 2400

BM Nac 5.5

JBJ Arctica 1/10Hp

Link to comment
Share on other sites

Bro never take order but got work shop? I always wanna build something myself but too afraid of waking up with whole living room waiting to be mob.

Anyway your diy really no horse run.

Sent from my C6903 using Tapatalk

No workshop la, just use one corner in my kitchen to do all the dirty job :eyebrow:.

Bro, if you dun try, you will never know you can do it so just plan carefully and enforce with more glue if you feel unsafe lo.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

How many different weld or solvent that require for joining?

Sent from my GT-N7105 using Tapatalk

Hi bro,

There are many brands and type of acrylic solvents in the market. People usually use Weldon 3/4 and 16 for acrylic project. Weldon 3 is water thin, very fast set, solvent type adhesive for acrylics joint whereas, Weldon #16 is gel type having stronger bond than 3. It is especially useful where fast cure and high strength are desired for applications such as large housings, signs and industrial fabrications. Beside the above, people also use it to seal leaks for the acrylic tank and it works well.

For me, I use mainly MTC-90 liquid solvent and Acrifix IR0192(gel type)purchased from DAMA for all my acrylic projects. Quality wise is comparable but price is much cheaper than Weldon brand.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member

Hi bro,

There are many brands and type of acrylic solvents in the market. People usually use Weldon 3/4 and 16 for acrylic project. Weldon 3 is water thin, very fast set, solvent type adhesive for acrylics joint whereas, Weldon #16 is gel type having stronger bond than 3. It is especially useful where fast cure and high strength are desired for applications such as large housings, signs and industrial fabrications. Beside the above, people also use it to seal leaks for the acrylic tank and it works well.

For me, I use mainly MTC-90 liquid solvent and Acrifix IR0192(gel type)purchased from DAMA for all my acrylic projects. Quality wise is comparable but price is much cheaper than Weldon brand.

Thank you for the info. Maybe I should try do up small refugium first test skill when I got some time

Sent from my GT-N7105 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS : Live Rocks with Coraline Algae

    2. 0

      Looking for berghia nudibranch & carpet anemone

    3. 0

      格里菲斯大学申请学校Griffith毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证Griffith University

    4. 0

      康涅狄格大学毕业证丢失UCONN毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单 University of Connecticut

    5. 0

      西蒙菲莎大学未正常毕业SFU毕业证书Q/微993398773办理加拿大大学毕业证成绩单留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证Simon Fraser University

×
×
  • Create New...