Rowaphos

[hanafi_weeseng]

Hope to know which brand of FR the bros here are using for rowaphos.Thank u

[Jameshong]

I'm using TLF150 to run Rowaphos. Small and compact for nano tank...hehehe.

[hanafi_weeseng]

I' m using h20 FR but seem like not very good.So hope to get some feedback and purchase a new one.

[tropic]

Weeseng.. I am using the h20fr. Can share what is the problem? Sent from my Android using Tapatalk2

[hanafi_weeseng]

Weeseng.. I am using the h20fr. Can share what is the problem? Sent from my Android using Tapatalk2

Bro,the rowaphos slip through the tiny holes to the base of the fr,not sure should i just buy something like the bio pellet type. At the moment i remove the black part which join at the output tube and increase the water flow.

[tropic]

Oic . I am using same one also slip through but its tumbling fine.nothing goes into tank.i find the dd built quality better among some others that I tried. Sent from my Android using Tapatalk2

[hanafi_weeseng]

Oic . I am using same one also slip through but its tumbling fine.nothing goes into tank.i find the dd built quality better among some others that I tried. Sent from my Android using Tapatalk2

Thanks bro,just want to confirm.Don't want to waste money on rowa.

[tropic]

I keep the black strainer intact for both ends. The finer mesh sponge I place on top and the less finer mesh sponge I place at the bottom. U can put another diy sponge on top but make sure dont clog until no flow.Before you put in the sump, u try and rinse out the finer rowa out using rodi water first. . Sent from my Android using Tapatalk2

[hanafi_weeseng]

Thank bro,will try your method.Appreciate for sharing

[tropic]

Np weeseng.And the output tube into the sump u can place it into the filter sock, just incase some fine particles get out from the fr.the tube provided is quite long also.just make sure its gently tumbling from bottom up.. Sent from my Android using Tapatalk2