Jump to content

3ftx1.5ftx2ft New Setup


staromsa
 Share

Recommended Posts

Day 2 of my setup :

Didnt have time yesterday to take a picture, hence took in this morning and decided to start a thread here to keep track of my tank and receiving feedbacks.

I agree that the way i scape my rocks in ugly though. But all comments,feedbacks,suggestions are WELCOME!

Here is the pic below,

post-22543-0-34514800-1365305727_thumb.j

  • Like 1

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Your scape looks ok, dun worry as long ad u like it.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Scape is alright. Not ugly at all. Try pointing the return pvc pipe and the wavemaker at each other to create a random flow in the middle session. If you are going for more sps, add 1 more pulsing type wavemaker on the left to attain great flow. Rest is how you control your bioload vs your nutrients export. Have fun :)

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Thanks guys for the very responsive response guys...

Thanks bros for the very motivating comments. Today is officially the 1st week of cycling.. No diatom yet... Weirdd lehh

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

James72 bro, alright will shift it and i am planning to get a wp40 soon. To make the pulsing effect..

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Was actually surprised that i would actually receive response... Really appreciate !!!!!!!!!! :yahoo:

Will update on my cleaning crew soon when i add them! Stay Tune!

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Thanks Bro! +1 motivation for me!

@Evolutionz , how are ur sps btw?

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Haha. That sounds like good news...

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Seniors, i would like to know how come is there a layer of white coating inside the pail of di water after mixing the salt? Made my tank really milky now..

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Seniors, i would like to know how come is there a layer of white coating inside the pail of di water after mixing the salt? Made my tank really milky now..
How do u mix? Using hand only and leave overnight or use a powerhead to aerate the mixture? And some brand of synthetic salt take longer time to dissolve.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Just read that i am not suppose to add the salt mix directly into my tank which i just did just now. Wont repeat thid silly mistake anymore... Btw im using coral pro. Water slowly clearing up. Just dose microbacter 7.

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Learnt *

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Just read that i am not suppose to add the salt mix directly into my tank which i just did just now. Wont repeat thid silly mistake anymore... Btw im using coral pro. Water slowly clearing up. Just dose microbacter 7.
No wonder. U need to prepare di/ro water beforehand and mix the right amt of salt to achieve correct salinity. Then use a pump or powerhead to aerate the saltwater mix for a day before adding in to your tank during WC.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Hahaha ... Woke up in the morning, and realised that my tank water is very much clearer already. Dosed microbac 7 this morn also. Also after the water change and washing the biorings(Using tank water) hope to see my no3 level drop.will test my no3 tmr as i just did a water change last night ..

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

@weeseng , hahaha... everyone makes mistake. Important thing is to learn from it and not to repeat it. @admiraltian ,thanks for the help anyway. If not i would be making this mistake for life.

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Will update on my LS very soon on the 3rd week.. going to add cleaning crew. Stay tune bros!

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

@weeseng , hahaha... everyone makes mistake. Important thing is to learn from it and not to repeat it. @admiraltian ,thanks for the help anyway. If not i would be making this mistake for life.
No problem, bro.
  • Like 1

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Thanks for the compliment weeseng bro.. My equipents used are stated on my signature. U might wanna take a look..

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...