Gouldian Posted March 19, 2013 Share Posted March 19, 2013 Some of you may have read the Article by Reef Builders on Nov 2012. Herewith a review I stumbled across at MASA and Salty Reef. Herewith is the description the product taken from Reef Central: Other companies are trying to use bacteria to do the work for them. What makes these cubes so unique? I am using yeast cells to do the work and not bacteria. Yeast is so much easier to work with and they are so easily manipulated. This is how I am able to break / bend the laws of nature like Redfield's Ratio. What I have done there is I used a nano particulated substrate that is titanium based. The yeast are able to take the titanium into the cells and they basically become "Cyborg" yeast. Half living biological organism and half synthetic nano particulated inert metal. Put the 2 together and you have an organism that behaves like a synthetic chemical, but, reproduces like a living biological organism. It also has a very basic "Artificial Intelligence" built into it because all organisms are programmed to survive. If there is enough nutrients to support the colony, they will grow the colony to that size, if the nutrient levels drop, the colony will die off to a size that can be maintained. This "Artificial Intelligence" control system is what makes the cubes last so long. Unlike pellets that get eroded through micro-abrasion in the reactors, cubes only erode through yeast cell consumption. This means that the product will grow or shrink according to your needs and they do this automatically without you needing to do anything and without any waste. Very basically put, within 11 days the cubes become self aware and start learning what your needs and habits are. After 11 days they assimilate the colony to what you need them to be. Unlike other products where we have to adjust ourselves and our systems to what that product requires in order for it to work, this is a product that will become what you and your system needs it to become. To do this with bacteria is almost impossible and you have to be really smart...and I have never been that smart to begin with! This is also the reason that the cubes need so much oxygen (apart from the gentle scrubbing action it provides) because yeast cells need oxygen, they do not operate very well under anaerobic conditions. This is why I stress the oxygen part so much and also where people make the mistake of using reactors to operate this product in. As long as you can feed oxygen into that reactor you will be fine, but, all reactors that are produced do not have this option. This was when the bomb method was born. Looks good, anyone here tried? In December 2012, Reef Builders reported Polyplab have secured the distributions of Orca Nitra Guard. It will be interesting to have them in Singapore soon. Quote "Reefs, like forests, will only be protected in long term if they are appreciated" Dr. J.E.N. Veron Australian Institute of Marine Science -----------------------------------------------------------------------Member of:UEN: T08SS0098FPlease visit us here: http://www.facebook....uaristSocietySG Facebook Group: http://www.facebook....gid=34281892381 Link to comment Share on other sites More sharing options...
Gouldian Posted March 21, 2013 Author Share Posted March 21, 2013 Guys, its now available in Singapore. Anyone review locally? http://freshnmarine.com.sg/estore/product_info.php?products_id=4007 Quote "Reefs, like forests, will only be protected in long term if they are appreciated" Dr. J.E.N. Veron Australian Institute of Marine Science -----------------------------------------------------------------------Member of:UEN: T08SS0098FPlease visit us here: http://www.facebook....uaristSocietySG Facebook Group: http://www.facebook....gid=34281892381 Link to comment Share on other sites More sharing options...
SRC Member Evolutionz Posted March 21, 2013 SRC Member Share Posted March 21, 2013 seems like product will only be available on freshnmarine on 26th march.. i wonder how does this fare against the NP biopellet XL.. both can be placed in filter bags instead of FR.. Edit : read the article and it sounds great.. simple media bag + airstone will do.. Anyone ordering 1 L from FreshnMarine and wish to share, i'll take 250ml.. cheaper to buy in bulk and share! Quote EvolutionZ's Floating Reef: (Decommed) EvolutionZ's 4ft shallow Mixed Reef Build : Link to comment Share on other sites More sharing options...
chickyduck Posted March 26, 2013 Share Posted March 26, 2013 Does anyone know which LFS other than FreshnMarine carry this product? Thanks. Quote Link to comment Share on other sites More sharing options...
SRC Member ATcraz Posted April 16, 2013 SRC Member Share Posted April 16, 2013 Keen to know as well if other LFS carries them. Quote Link to comment Share on other sites More sharing options...
SRC Member illumnae Posted April 17, 2013 SRC Member Share Posted April 17, 2013 A few things in the Fresh n Marine description I don't really get: "Bacteria consume the high carbohydrate food source found in the BIO-cubes...." - so is it Cyborg yeast + titanium, or is it bacteria with carbon source? "The biomass is then skimmed out with a protein skimmer or is consumed as a food source by corals and clams..." - it's claimed to be usable in both fresh and marine environments. So what do freshwater hobbyists do to get rid of the biomass? "For heavily stocked tanks, use 3ml to every 1 litre of aquarium water and for aquariums with lighter stock loads, add 3 to 4 ml to every 1 litre of aquarium water." - so for heavily stocked tanks, you use the same or less than lightly stocked tanks? Quote Link to comment Share on other sites More sharing options...
reef garden Posted April 27, 2013 Share Posted April 27, 2013 I gather that the cyborg yeast comprises yeast and titanium to form a living cum synthetic product that is able to grow at different rates, depending on the availability of nitrates and phosphates. Bacteria are not mentioned in the original Orca Labs description although Fresh 'N' Marine mentioned it. The absorption and conversion of nitrates and phosphates by the cyborg yeast into biomass are apparently oxygen demanding processes and release carbon dioxide. For freshwater systems, aquatic plants benefit from the carbon dioxide. Any biomass and excess carbon dioxide would likely be removed via water changes. For lightly stocked tanks, the amount used is more, supposedly to provide more cyborg yeast to grow the colony faster and keep the process going. This is just my understanding. Quote  Aquarium 3 - 250 liters with sump and refugium Jebao DC 6000 pump with speed controller Skimz skimmer AI Hydra 52 HD Hailea HS-66A (1/4 hp) chiller Maxspect Gyre TLF Phosban reactors with Phosban Tunze nano osmolator Marine Magic Triplet Dosing  Aquarium 1 - 27 litres Atman HF-0600 HOB filter Maxspect Razor Nano 60W (10,000 K) AOL 60 litres chiller Tunze Nano Osmolator   Link to comment Share on other sites More sharing options...
rekian Posted April 27, 2013 Share Posted April 27, 2013 Anyone has tried this product for a local review? Quote Link to comment Share on other sites More sharing options...
reef garden Posted April 28, 2013 Share Posted April 28, 2013 I'm currently trying it in a HOB filter without air stone. Let's see if it works. If not I will try another method with air stone. Quote  Aquarium 3 - 250 liters with sump and refugium Jebao DC 6000 pump with speed controller Skimz skimmer AI Hydra 52 HD Hailea HS-66A (1/4 hp) chiller Maxspect Gyre TLF Phosban reactors with Phosban Tunze nano osmolator Marine Magic Triplet Dosing  Aquarium 1 - 27 litres Atman HF-0600 HOB filter Maxspect Razor Nano 60W (10,000 K) AOL 60 litres chiller Tunze Nano Osmolator   Link to comment Share on other sites More sharing options...
SRC Member ATcraz Posted April 28, 2013 SRC Member Share Posted April 28, 2013 Started on 24/4. Progressively added till 27/4. Approx 400ml in 560litres tank water(includes sump). Cubes started to brown out. Those in white are recently added.it is at a compartment before return to main. Streams of water are flowing through it. Nitrate btw 5ppm - 10ppm per salifert test kit on 27/4. Due to Feeding regime(10 cubes frozen+4 times pellet) weeks back, nitrate went from 0-1ppm to 5-10ppm. Hope to observe a return to 0-1ppm range with bio-cubes. Running ATS&skimmer&cheato&red bamboo&rowa. Quote Link to comment Share on other sites More sharing options...
Gouldian Posted April 29, 2013 Author Share Posted April 29, 2013 Quote "Reefs, like forests, will only be protected in long term if they are appreciated" Dr. J.E.N. Veron Australian Institute of Marine Science -----------------------------------------------------------------------Member of:UEN: T08SS0098FPlease visit us here: http://www.facebook....uaristSocietySG Facebook Group: http://www.facebook....gid=34281892381 Link to comment Share on other sites More sharing options...
SRC Member illumnae Posted April 30, 2013 SRC Member Share Posted April 30, 2013 Looking forward to updates on this! If it works in freshwater I'm definitely interested to get them for my freshwater tanks too Quote Link to comment Share on other sites More sharing options...
SRC Member ATcraz Posted May 4, 2013 SRC Member Share Posted May 4, 2013 4th May (7days later) still at 5-10ppm range. Added about 150ml of nitra guard. Observation 4th May:Nitra guard added on 27th Apr turning even darker. Quote Link to comment Share on other sites More sharing options...
SRC Member ReefzLover Posted May 4, 2013 SRC Member Share Posted May 4, 2013 Just started mine last night... will update here for results too. Quote Link to comment Share on other sites More sharing options...
SRC Member LittleBurger Posted May 9, 2013 SRC Member Share Posted May 9, 2013 So far seems like got more negative feedback than positive. Negative being no reduction to the n & P Quote Tank size:36"x36"x24" Return pump" 2x Reef Octo 5000 Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s. Wavemaker:2xVortech MP40wES Chemical filtration:1xeducator FR(biopellets) Chiller:1hp Daikin compressor. Lighting:2 x Kessil A360we Auto topup system: JBJ ATO + new jet 1200 Dosing system: Kamoer 3 channel. Additives: ESV 2 part. Power consumption 2XReef Octo 5000: 120watts BK skimmer:50watts 2xVortech wavemaker:70watts Daikin compressor:775watts Lighting:180watts Ato system:21watts Exhaust fans:16watts Refugium light:27watts Link to comment Share on other sites More sharing options...
rekian Posted May 9, 2013 Share Posted May 9, 2013 So far seems like got more negative feedback than positive. Negative being no reduction to the n & P Feedback from? 1 Quote Link to comment Share on other sites More sharing options...
SRC Member LittleBurger Posted May 9, 2013 SRC Member Share Posted May 9, 2013 Feedback from?reefcentral. Got some arguments ... Quote Tank size:36"x36"x24" Return pump" 2x Reef Octo 5000 Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s. Wavemaker:2xVortech MP40wES Chemical filtration:1xeducator FR(biopellets) Chiller:1hp Daikin compressor. Lighting:2 x Kessil A360we Auto topup system: JBJ ATO + new jet 1200 Dosing system: Kamoer 3 channel. Additives: ESV 2 part. Power consumption 2XReef Octo 5000: 120watts BK skimmer:50watts 2xVortech wavemaker:70watts Daikin compressor:775watts Lighting:180watts Ato system:21watts Exhaust fans:16watts Refugium light:27watts Link to comment Share on other sites More sharing options...
SRC Member ReefzLover Posted May 9, 2013 SRC Member Share Posted May 9, 2013 So far mine is doing great.. did not do any water change after using it. After using it for about a week I tested my no3 again. Quote Link to comment Share on other sites More sharing options...
reef garden Posted May 9, 2013 Share Posted May 9, 2013 Well, there wasn't any noticeable change in my tank when I used it in the HOB filter. So I transferred it to a Satellite Breeder Box where the air pump delivers oxygenated water to the box. There's still no change yet. Quote  Aquarium 3 - 250 liters with sump and refugium Jebao DC 6000 pump with speed controller Skimz skimmer AI Hydra 52 HD Hailea HS-66A (1/4 hp) chiller Maxspect Gyre TLF Phosban reactors with Phosban Tunze nano osmolator Marine Magic Triplet Dosing  Aquarium 1 - 27 litres Atman HF-0600 HOB filter Maxspect Razor Nano 60W (10,000 K) AOL 60 litres chiller Tunze Nano Osmolator   Link to comment Share on other sites More sharing options...
SRC Member LittleBurger Posted May 10, 2013 SRC Member Share Posted May 10, 2013 If I remembered correctly the discussions. This media need oxygen. So putting it in places where it is devoid of oxygen, won't work. It is suggested to put an airstone at the bottom to provide o2. Pple did tat but nothing change. Maybe many not yet hit sweet spot Quote Tank size:36"x36"x24" Return pump" 2x Reef Octo 5000 Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s. Wavemaker:2xVortech MP40wES Chemical filtration:1xeducator FR(biopellets) Chiller:1hp Daikin compressor. Lighting:2 x Kessil A360we Auto topup system: JBJ ATO + new jet 1200 Dosing system: Kamoer 3 channel. Additives: ESV 2 part. Power consumption 2XReef Octo 5000: 120watts BK skimmer:50watts 2xVortech wavemaker:70watts Daikin compressor:775watts Lighting:180watts Ato system:21watts Exhaust fans:16watts Refugium light:27watts Link to comment Share on other sites More sharing options...
SRC Member ReefzLover Posted May 10, 2013 SRC Member Share Posted May 10, 2013 Btw I put my Nitraguard in my skimmer body.. Quote Link to comment Share on other sites More sharing options...
lawrence.liow Posted June 25, 2013 Share Posted June 25, 2013 I received my Ntra Guard yesterday. I am going to put inside my sump tonight. My current nitrate level is 160ppm. Will update my result next week. Quote Link to comment Share on other sites More sharing options...
lawrence.liow Posted July 8, 2013 Share Posted July 8, 2013 No change in Nitrate on the 7th day. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.