Jump to content

WP 40 Wavemaker


Kakani
 Share

Recommended Posts

  • SRC Member

Just got wp40. w1 wavemode surprisingly stong for my 5 footer.

Anybody knows where to get a step down adjustable adapter: 15v-24v and any particular type to get. Estimated cost too

DE sells adapter for stepping down. or you can go simlim :D

Link to comment
Share on other sites

  • SRC Member

Guys.. Do u all have problem with the wp40 light sensor? As in bright light = wave mode.. Dim light =night mode... Total darkness=wave mode... Is it suppose to work this way or mine is spoil?

Link to comment
Share on other sites

Think it is due to the sensitivity of the sensor. Had the same prob before, but now I place the controller nearer to windows so that sensor is facing out and it works even in total darkness.<br />Think it got to do with difference between ambience lights vs the lights going to the sensor.<br /><br />Sent from my GT-N7105 using Tapatalk 2<br /><br />

Link to comment
Share on other sites

  • SRC Member

Read that high powered light will spoil the light sensor, and that is not covered under warranty.. personally i don't use the sensor..

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

yes, that is normal. at least mine behave the same way. i think it is designed for those with sump with reverse lighting. in the morning, sump area is completely dark the wp40 on full operation. then nightime lighted sump for cheato to counter ph swings, wp40 on night mode. conclusion works great! :)

Link to comment
Share on other sites

  • SRC Member

Have use this product for a mth now for my 3feet. Using the wavebox mode & lucky my tank has bracings on 4 sides. This prevented the strong wave created by this wave maker from splashing out. And, my filter wool gets choked every alternate days, which i have to change much more frequent now, compared to using my previous wavemaker. It is a good sign thro'. More 'rubbish' gets washed down from my display tank to be trapped by my filter wool before going to my skimmer at the sump tank.<br /><br />Sent from my GT-I9100 using Tapatalk 2<br /><br />

Link to comment
Share on other sites

Any one have pics of the wp40 in the tank ?

Humble tank :

Size: 4x2.5x2 ft - Display 

Equipment :

Return 1 : Ecotech marine L1

Return 2 : Ecotech marine M1

CR : Skimz CM122 - Caribsea extra course media with Grotech magnesium

Light : ATI 8x54W

 

 

Link to comment
Share on other sites

Is there even a new gen? How come u all can set night mode?

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

  • SRC Member

Is there even a new gen? How come u all can set night mode?

there's a sensor inside for you. when no lights it will automatically go night mode. some find it useless as nature in the big sea there's no such thing called night mode LOL

Link to comment
Share on other sites

I currently have a spoiled wp40. Really dissapointed. The popeler cant function properly and stopped. It died on me. Is the warranty covered? Dr Evil pls kindly get back to me. Thankyou.

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

  • SRC Member

Does the impeller start and stop on "else" and w3 mode?

impeller only start and stop on w1. Else and W3 is more of a random waves that picks up and slow down..

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

Its on w1 mode but guys guess what? It start and stop after i knocked it. Snd never starts again... so it means i need to knock it every 3 mins or so to keep it running? Thats definitely faulty. Ive check all the wirings , all attached properly. The impeller is also not ratating properly. Its making some noise as well.

Tank and Equipments Used:-

Tank Size: 3x1.5x2

Return Pump: Eheim 1260

Lighting: DE 36 Inch T5 Retrofit 6 x 39 Watts | 5 ATI Blue Plus & 1 ATI Special Blue.

Wavemaker: 1x WP-40 | 1x SUNSUN 5000ltr/hr

Skimmer: BUBBLE MAGUS C7

Skimz ideas FR: Running ROWAPHOS (FEEDER PUMP: RESUN 1000)

Enductor FR: Running NP Biopellet (FEEDER PUMP: AQUABEE 1000)

Chaeto in sump

~ Watching my tank matures and progressing day by day , gives me great satisfactory

Cheers!

Link to comment
Share on other sites

  • SRC Member
Its on w1 mode but guys guess what? It start and stop after i knocked it. Snd never starts again... so it means i need to knock it every 3 mins or so to keep it running? Thats definitely faulty. Ive check all the wirings , all attached properly. The impeller is also not ratating properly. Its making some noise as well.
Its on w1 mode but guys guess what? It start and stop after i knocked it. Snd never starts again... so it means i need to knock it every 3 mins or so to keep it running? Thats definitely faulty. Ive check all the wirings , all attached properly. The impeller is also not ratating properly. Its making some noise as well.
Get back to delighting, you should have 6 months warranty provided for this.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

So what happen to WP-25?

according to reef central, US will receive the wp-25 in 2 weeks times. Its 10 bucks cheaper than the wp40 and flowrate is 6000l/hr. Not sure how true is this.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Prata and brain for sale

    2. 0

      Hailea HS66a Chiller

    3. 0

      Selling the following Items

    4. 0

      WTG Chaeto

    5. 1

      WTS Livestock

×
×
  • Create New...