WP 40 Wavemaker

[Ahhyi]

"chiong" mp40. lol

Lol

[spkentchai]

"chiong" mp40. lol

4 means you have a tornado in making.....lol

[zonerx]

anyone know if wp40 suitable for 3ft tank? or wait for wp25?

[Kakani]

Wp40 for 3ft ok you can lower the speed

[Sengreef]

Can WP40 connected to each others for master/slave control or all pumps run individually in a tank if running more than 1 pump in a tank ?

[zonerx]

Wp40 for 3ft ok you can lower the speed

ya but if lowest setting still too strong then chamlor...

[Mokyc]

WP 25 can used for up to 3000L. Very good lio!

[megacue]

2ft suitable with the lowest setting?

[Ahhyi]

I using wp40 for my 322. I have to set to low lol. Still trying to adjust till I can use high. Probably need to rescape and keep adjusting.

[ryanlio]

I sold away my mp40 for 2xmp10.. now I can do full power.. am happy.

Sent from my GT-N7000 using Tapatalk 2

[hanafi_weeseng]

Seem to have good review now maybe can buy 1or 2 before cny

[thomas_lim]

I sold away my mp40 for 2xmp10.. now I can do full power.. am happy.

Sent from my GT-N7000 using Tapatalk 2

I think u mistook the WP40 discussed here to MP40 liao.

[richreef]

Is it avail locally?

westcoast also have it,and Jeff says the smaller version is coming also.

[seahwl]

The price is good and reasonable as compare to other wavemaker like tunze and Conch.

The controller look more robust.

Strongly recommend for this wavemaker.

[spkentchai]

I'm using both tunze wavebox and wp40. I cannot say that wp40 is much better than tunze as both has its good and bad. But the price of wp40 obviously attracted many reefers. The quality of wp40 is good with a few refinement will be perfect.... I will continue to use the wavebox and supplement with wp40... Cheers....

[seahwl]

I'm using both tunze wavebox and wp40. I cannot say that wp40 is much better than tunze as both has its good and bad. But the price of wp40 obviously attracted many reefers. The quality of wp40 is good with a few refinement will be perfect.... I will continue to use the wavebox and supplement with wp40... Cheers....

Yup. agreed. The price of Wp 40 can buy 2 -3 set than tunze 6105.

[zonerx]

any other shop sell wp40 beside iwarna?

[kutrax82]

any other shop sell wp40 beside iwarna?

Ah beng also carry this wavemaker, Got mine from Irwana just today. Must say this wavemaker is pretty strong comparing to my conch 2 , now i can see wave in my tank.

[dnsfpl]

great to see more value for $ product

[I love angel]

It shows that china products are improving in term of quality and performance ... Just looking at Tesino pump and now Jebao....

[zonerx]

Ah beng also carry this wavemaker, Got mine from Irwana just today. Must say this wavemaker is pretty strong comparing to my conch 2 , now i can see wave in my tank.

where is ah beng located?

[l3lackKaho]

Low cost

Save Energy.

[bezz]

It shows that china products are improving in term of quality and performance ... Just looking at Tesino pump and now Jebao....

Mention Tesino I angry...

My Tesino trip my circuit breaker 2 weeks ago, so I reset the breaker and switch on the Tesino pump again and the breaker got burned... cost me $300 at 10pm at night to get electrician to change the breaker

Needless to say I was so angry, I took the pump and threw it down the rubbish bin

[I love angel]

Mention Tesino I angry...

My Tesino trip my circuit breaker 2 weeks ago, so I reset the breaker and switch on the Tesino pump again and the breaker got burned... cost me $300 at 10pm at night to get electrician to change the breaker

Needless to say I was so angry, I took the pump and threw it down the rubbish bin

Normally the circuit breaker will not burnt unless you turn it on by forcing the lever without disconnecting the faulty device. If there is a short circuit, the large current burns the breaker and trip the whole block of flat's incoming breaker. Need to call town council ....

You should turn off all the switches so that no load is connected to the breaker, then turn on the breaker. One by one turn on the switches. If there is a problem, the breaker will trip and not burnt.

[bezz]

Normally the circuit breaker will not burnt unless you turn it on by forcing the lever without disconnecting the faulty device. If there is a short circuit, the large current burns the breaker and trip the whole block of flat's incoming breaker. Need to call town council ....

You should turn off all the switches so that no load is connected to the breaker, then turn on the breaker. One by one turn on the switches. If there is a problem, the breaker will trip and not burnt.

A bit off-topic...

But I too had the same thinking as I have never seen a burned breaker in my life even after doing many electrical projects that tripped the breaker many many times. I remembered that electrician told me to call him if the breaker trip again (he gave 1 year warranty) after he 'repaired' it, so I called him and told him that the new breaker is giving me the same problem and ask him to come over. He told me to go check the electrical panel outside my house and to locate 2 small boxes above the panel, there are breakers in there too and to switch those breakers up.

Once I heard him, I knew I was cheated into changing the breaker for $300...

Tuition fees I guess... But still my Tesino pump had electrical leak that started it all...