Jump to content

DI water filter question.


Evolutionz
 Share

Recommended Posts

  • SRC Member

Hey guys, i just bought a 2nd hand Crystal Pro 3 stage water filter and previous owner told me he use the filter for a few months only and left it untouched but with water inside, this crystal pro comes with a TDS meter hooked on it and when i tried tested it just now. the TDS meter measured my inlet water (water that haven't been through the filter) at 65 - 70 PPM. and the outlet water after passing the filters, ranges from 10 - 20ppm. I know DI should be 0ppm... is there a need for me to replace the Resin inside the filter?

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

Some resin change colors to indicate that it has exhausted.. u might want to try to reduce the flow as well.. and, u picked it up before i do.. haha..

Sent from my GT-N7000 using Tapatalk 2

Link to comment
Share on other sites

  • SRC Member

Thanks for your reply and sorry for beating you to it haha... Dark color means resin exhausted? the flowrate i put it to the slowest already.. slowest ppm reading is 10 - 15.. faster flow and ppm go up to around 20.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

For me.. the new resins is orange brown.. when exhausted it turns black green.. as indication.. anyways.. madpetz do sell refills..

Sent from my GT-N7000 using Tapatalk 2

Link to comment
Share on other sites

Best to slow the water flow and let the water run for a while before taking the reading to determine if the DI is really exhausted. As you mentioned, when you slow the water, the TDS reading drops, so the resin may not be exhausted yet. Best to use the TDS meter reading and not the colour to determine the status of the resin.

My RO/DI last changed resin and filters 1.5yrs ago and I collect about 20L of water a week.

Hope this helps...

Link to comment
Share on other sites

  • SRC Member

Thanks for ur advice.. Today I filled up my tank 34L with the water filter at a TDS output of around 10.. I guess it's usable since my tap water tds is 70.. Resin color I can see 1/4 - 1/2 amount is darker color and the rest are orange..

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

hmm i think this is the colour when the resin gets into contact with water...

my resin when deplete does not change colour, cant tell by colour

2 Feet Tank: (Decom Feb 2015)
-Lightings : Pharos LED light 90W with wireless controller
-Chiller : Arctica 1/10HP with H2Ocean Flow Pump 2000

-Wavemaker : Vortech MP10ES
-Skimmer : Bubble Magus NAC 3.5

-Return Pump : Eheim Compact 3000
-Reactor – TLF150 (Mod) with NP Biopellet
-Reactor – TLF150 with Rowaphos


Link to comment
Share on other sites

hmm i think this is the colour when the resin gets into contact with water...

my resin when deplete does not change colour, cant tell by colour

The resin will only change colour if it is colour changing type. I think Madpetz stopped selling those. I bought mine from them when they had the resin sale about 1.5yrs ago.

Link to comment
Share on other sites

  • SRC Member

Yes i do use 10 to 15.. once reach 10, it will be shooting fast up to 20 and over. Recommend to change after 10, since it will be shooting up fast. Some ppl like to maintain at zero. up to own indivdual.

And remember your carbon need to be replace too.

  • Like 1

Tank Theme: Mixed Reef with clams

3 feet tank with IOS

Eheim 1262

K3 wavemaker x1

Lightings: T5 actinic blue x4 , T5 white x4

Skimmer: BMQQ

Artica 1/5

Dosing: NA

-----------------------------------------------------------------------------

Reefing is sharing. People with rotten mouth is sure a loser for life as expected. When a tomato gets rotten, you can nvr save it.. Throw it away before it infect the good ones.

Member of:

post-1182-0-60431600-1322062247_thumb.jppost-2241-0-43391700-1354511230.png

Link to comment
Share on other sites

  • SRC Member

Thanks for ur reply.. Since the crystal pro comes with one carbon and 2 resin should I stick to it? Or change to one sediment one carbon and one resin? Thanks!

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • SRC Member

i dun think thers any RO membrane inside.. i didnt know i needed that.. read many DI set up and all uses carbon and DI resin only..

Anyway, today i went to test my DI water freshly mixed with red sea coral pro salt and my API nitrate test kit shows that my DI water nitrate is 0ppm.. didnt have any po4 test kit though.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

  • 1 year later...

Bringing up an old topic. I was wondering when i should change my DI resins. Considering i am only keeping SPS at the moment. Currently using the crystal pro DI 3 stage, with madpetz resin. Reading is now 3 up from 0 after 2 mths. Is it still considered ok to use for sps dominated tank? Or am i always looking for 0ppm. Changing the resins isn't the issue, but i would like to know what is the limit? Change at 5?

 

I Love Stagsss

Link to comment
Share on other sites

  • SRC Member

depends on your own, some change at the slightest rising of tds, as they want it strictly at 0, to me singapore water is fine, i change my resin when tds exceeds 10. i actually even top up some water with just tap water + seachem prime.

EvolutionZ's Floating Reef:

(Decommed) EvolutionZ's 4ft shallow Mixed Reef Build :

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      格里菲斯大学申请学校Griffith毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证Griffith University

    2. 0

      康涅狄格大学毕业证丢失UCONN毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单 University of Connecticut

    3. 0

      西蒙菲莎大学未正常毕业SFU毕业证书Q/微993398773办理加拿大大学毕业证成绩单留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证Simon Fraser University

    4. 0

      悉尼科技大学申请学校UTS毕业证成绩单信封Q/微993398773办理澳洲大学毕业证文凭留信认证留服认证教育部认证回国证明澳洲本科文凭硕士学位证毕业证University of Technology Sydney

    5. 0

      旧金山大学毕业证丢失USF毕业证成绩单Q/微993398773办理美国大学毕业证学位证留信认证留服认证教育部认证回国证明美国本科学位证硕士文凭成绩单University of San Francisco

×
×
  • Create New...