Jump to content

Help for water parameters


Recommended Posts

  • SRC Member

Dear fellow reefers. I need some help. I understand there are many different water parameters in a reef tank. I need to know how I can maintain lower or increase the diff parameter to be ideal. Lets say salinity should be 1.022 I could add more salt or water to increase or lower it.

I know I need to check

Salinity ideally 1.022-1.026 add water or salt

Calcium 380-440 dosing or cr

No2

No3

Mg

Ph 8.0-8.5

Can anyone help me. Am I missing any important parameters?

Link to comment
Share on other sites

  • SRC Member

you're missing out on alk/kH value of your water.

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

  • SRC Member

No worries bro. My water parameters are good. Just the mg is something I just came across. The rest all within healthy range.

Mg is important if you are keeping corals especially SPS
Link to comment
Share on other sites

Mg needs to maintain between 1300-1500ppm, it's help to keep your calcium and KH levels stable and also help in coraline algae growth if I'm not wrong.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

You'll soon realise ca,mg,kh,ph would be in relation to one another.

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

  • SRC Member

You'll soon realise ca,mg,kh,ph would be in relation to one another.

Yup. I realized that. My calcium reactor keeps them all in check. Thanks guys. I just want to make sure all my parameters are right and stable

Link to comment
Share on other sites

  • SRC Member

Hmm KH. What to do about that

What about mg?

Kh is the carbonate hardness in your water. It's like a buffer to prevent swings in pH levels.

Keeping it stable also means your calcium levels would be stable. And for your calcium levels

to be stable, you need a high mg like what bro admiraltian said, 1300-1500.

With regards to NO3/NO2, many ways to reduce it. Different bros here use different methods.

I like my vodka and mb7 combo.

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

  • SRC Member

Yup. I realized that. My calcium reactor keeps them all in check. Thanks guys. I just want to make sure all my parameters are right and stable

Alright cheers bro :)

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

Happy reefing. :cheers:

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling Nano Tank With FIlter and Chiller and Maxspect Jump L-130

    2. 2

      Fluval Sea Marine & Reef LED 2.0

    3. 225

      WTS live rotifers, tigger pods, phyto

    4. 0

      Corals to sell/give

    5. 0

      UQ毕业证【微信:A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

×
×
  • Create New...