Jump to content

My DIY 6x24W T5 set


kaykay
 Share

Recommended Posts

  • SRC Member

After toying with the idea of MH, T5, of a combination of both, I've finally decided to go for full T5 for my 2by2.

Wanting the flexibility if 6 tubes, I had to DIY, as there seem to be no such option for a 2ft unit.

So armed with some aluminium bars, some T5 accessories, some shopping time at SLT, and a whole lot of elbow grease, this is what I came up with..

post-3628-13567769394881_thumb.jpg

I had at first wanted to fix the individual reflectors permanently on the frame, as I know the reflectors will attain a mind of their own, each wanting to face its own way. Though technically it's possible, changing bulbs can become a challenge to keep the skin on my fingers intact. Therefore I followed the traditional way.

post-3628-13567844907132_thumb.jpg

Do note that the reflectors are purchased from a different vendor from the 4.

Tubes are:

2 x ATI Aquablue Plus

2 x ATI Blue Plus

1 x ATI Purple Plus

1 x Giesseman Actinic Plus

post-3628-13567846902261_thumb.jpg

How the tank looks under 6 tubes all on.

post-3628-13567848156267_thumb.jpg

Link to comment
Share on other sites

Bro is the 2 external tube white? Cause normally people put white tube in the center as they are the basic light and they are grow for coral grow, blue tube will be normally outside.

  • Like 1

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

Bro is the 2 external tube white? Cause normally people put white tube in the center as they are the basic light and they are grow for coral grow, blue tube will be normally outside.

I had the same thoughts. ^_^

How much is the entire setup? DE Lighting has 2ft 6 tubes option, so I'm surprised that you have to resort to DIY unless it is significantly more cost effective, etc.

Link to comment
Share on other sites

  • SRC Member
Bro is the 2 external tube white? Cause normally people put white tube in the center as they are the basic light and they are grow for coral grow, blue tube will be normally outside.

I also had the same thoughts initially. But after speaking with Ken at Madpetz & Ah Hang at AM, I was convinced to place the purple and actinics in the middle. Ken advised me to place the whites on the outside, for a reason I can't remember now LOL... Hahaha..

The blues and the whites can be switched easily. Probably I'll do so later. Thanks..

As for the cost, I saved more than 40% than if I had bought the retrofit. So the DIY was worth it.

The main reason for the cost savings is that I reused many parts from my previous DIY T5 set. I also inherited the aluminium bars from another reefer here, and had another bro helped me cut them in his workshop.

Link to comment
Share on other sites

  • SRC Member
Wow impressive workmanship.

I think your bros are of great help. The aluminium bars arent cheap man haha

Thanks bro.

Yup you're absolutely right. The bars are expensive. Actually I have leftover bars. Will be starting another thread to give them away.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...