Jump to content

My DIY Cabinet

oceanviper

By oceanviper,
in DIY Forum

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi Sherman bro.

I ordered the blank generic pcb board and then will do some programming etc..

Of course need to get some component since is a blank pcb board.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • Replies 275
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

ryanlio
ryanlio

Bro, I think your stand supports not so ideal.. Refer here.. http://www.garf.org/stand.html The horizontal pieces supposed to "wrap" the verticals.. From your construction, seems like the horizo

ryanlio
ryanlio

Oh wait. Or is the stand standing on its sides in the last picture?? Then it's ok..

allantang
allantang

Can I suggest something? The horizontal beams is not strong if u mount it this way. Is better if it is sited onto the vertical beam.

Posted Images

sherman Enthusiast

sherman

Posted
Posted

Wow bro you do your own controller. Interesting. :thumbsup:

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi Sherman bro.

Let see how things go when those stuff receive.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 2 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The tank life continue here.

Updates on the DIY controller will be continue here

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 3 months later...
  • 2 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

wah your casual shots of your current corals all very nice.

Hi bro.

There are much more better shots out there.

thks

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 2 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Eversince the last 3ft tank with side overflow i have till now.

My hand start itchy into acrylic material for the next project.

Below are two design which i have in mind.

a. Similar to existing 3ft side overflow tank, only different in material ( glass --> acrylic )

post-16802-0-15324400-1416745563_thumb.j

b. A 4ft tank with behind overflow.

post-16802-0-52440400-1416745577_thumb.j

Any critics and comments are welcome.

Thanks

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

you are really good in diy. i can never do it

Hi bro...

Not really....

Just own interest

Thks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Eversince the last 3ft tank with side overflow i have till now.

My hand start itchy into acrylic material for the next project.

Below are two design which i have in mind.

a. Similar to existing 3ft side overflow tank, only different in material ( glass --> acrylic )

attachicon.gif3ft Acrylic.jpg

b. A 4ft tank with behind overflow.

attachicon.gif4ft.jpg

Any critics and comments are welcome.

Thanks

For the 4ft, likely will use bean animal overflow...just playing with the piping dimension.

My current 3ft side overflow is having 40mm pipe with durso configuration.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 2 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Bean animal seems to be real quiet on the overflow.

I need to estimate what size of the pipe used as my current overflow is 40mm with 10l per hr return pump.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

As my return pump failed and cause damages to my current livestocks and some of my sps STN.

This further bring to my decision of bringing forward the DIY of the next tank that uses Acrylic.

Below is the picture of my autocad design with bean animal overflow system hole allocated.


post-16802-0-40374600-1419001756.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Waiting. What u need for Acrylic DIY

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Waiting. What u need for Acrylic DIY

Hi Sherman bro.

I need to get the new plan worked out before commence as this will be the one massive as almost everything need to redo including cabinet, sump and also the power rail for lighting and also the electronics stuff.

This is more massive than my previous DIY cabinet plus the tank.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Wow. Ok.

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Suggestion are welcome for the return pump outlet.

The current plan is from behind which left 3 sides ( front and both sides ) clear for view as the wavemaker also mounting on the rear sides.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 1 month later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

The next diy led which will be use for the new tank.

post-16802-14236660490041_thumb.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 3 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

This is the cutoff size after migrating the design into a 4ft x 6ft acrylic sheet.

Yet to send in the order as still CNY...

post-16802-0-19238100-1425482624_thumb.p

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

This is the final design for the above cutoff sheet.

post-16802-0-26418200-1425483390_thumb.p

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证，保录取Purdue University,West Lafayette

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证，保录取Purdue University,West Lafayette专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证，保录取Purdue University,West Lafayette专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证，保录取Purdue U 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 niversity,West Lafayette
      vsf3423 in LPS Coral forum
    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University 〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University 〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      vsf3423 in LPS Coral forum
    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证，保录取Fordham University

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证，保录取Fordham University专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证，保录取Fordham University专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证，保录取Fordham University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      vsf3423 in LPS Coral forum
    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University〖国外毕业证书 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University
      vsf3423 in LPS Coral forum
    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证，保录取University of Pittsburgh

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证，保录取University of Pittsburgh专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证，保录取University of Pittsburgh专业制作美国PITT毕业证》Q/微信7515 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 58146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证，保录取University of Pittsburgh
      vsf3423 in LPS Coral forum
×
×
  • Create New...