Jump to content

My DIY Cabinet

oceanviper

By oceanviper,
in DIY Forum

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Maybe will do some shots this weekend after changed some maintenance done.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • Replies 275
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

ryanlio
ryanlio

Bro, I think your stand supports not so ideal.. Refer here.. http://www.garf.org/stand.html The horizontal pieces supposed to "wrap" the verticals.. From your construction, seems like the horizo

ryanlio
ryanlio

Oh wait. Or is the stand standing on its sides in the last picture?? Then it's ok..

allantang
allantang

Can I suggest something? The horizontal beams is not strong if u mount it this way. Is better if it is sited onto the vertical beam.

Posted Images

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Chaeto offered from both nice reefer to seed my newly setup refugium is beginning its function with algae decreasing from the glass in my sump tank.

The lighting for the refugium 1.5ft T5 operate for 8hrs.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 4 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Just a bit of updates on my tank.

Pink mille bought from Pinnacle 3 weeks back under DIY LED with brown turned into pale pink.

post-16802-0-67269900-1400544563_thumb.j

post-16802-0-33379300-1400544573_thumb.j

post-16802-0-91822200-1400544583_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

curious,why you didn't remove your plane box from your tank?

Haha...

Temporary there as i'm looking for some extra time to complete it and do a maiden flight.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
dragon1188 Rookie

dragon1188

Posted
Posted

Absolutely right that check valves can fail. Mine failed a number times resulting in flood to sump tank.

Have to do monthly test to "dislodge " the ball which got stuck very often. You got to hear the "thump" sound as confirmation that the ball has locked into position every time you shut the return pump. If no thump sound then got to on n off a few more times for the ball to dislodged n locked in position.

I have heard that check valves often fail and it is safer to drill a hole as well

  • Like 1
Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

I'm using the piston rod type and not the ball type.

So far so good....and has not failed me...

Been using this similar check valve in the past for my freshwater tank for almost 6 years with no maintenance at all.

That is my past experience which may not be for this time...

Anyway...just keep my fingers cross.....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
james72 Newbie

james72

Posted
  • SRC Member
Posted

Maybe you can consider drilling a hole to break siphon.

Cheers,

James

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

I think drilling one or 2 holes is more safe.

Sent from my LG-D958 using Tapatalk

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

I think drilling one or 2 holes is more safe.

Sent from my LG-D958 using Tapatalk

Depend on where the holes...

If you have the check valve and the output pipe has restricted length, it will not sufficient to cut the back flow siphon....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Here are some shots from my camera with no editing aside from resizing it.

Wild SPS from Aquamarin

post-16802-0-20066200-1401026900_thumb.j

Yellow Birdnest from reefer Moky

post-16802-0-41384200-1401026901_thumb.j

Blue Digi frag from reefer Max

post-16802-0-97656600-1401026901_thumb.j

SPS frag from reefer Patrick

post-16802-0-17382800-1401026904_thumb.j

post-16802-0-33723600-1401026905_thumb.j

Aussie SPS from Iwarna

post-16802-0-56820000-1401026902_thumb.j

Xenia from reefer Moky

post-16802-0-12867100-1401026903_thumb.j

Pink Millie from Pinnacle 4 weeks ago...

post-16802-0-79549600-1401026904_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Continue

SPS frag from Patrick

post-16802-0-61577400-1401027140_thumb.j

post-16802-0-20936000-1401027141_thumb.j

post-16802-0-73195600-1401027141_thumb.j

post-16802-0-72850000-1401027142_thumb.j

Duncan from Pinnacle back in June 2013.

post-16802-0-24014100-1401027142_thumb.j

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
dragon1188 Rookie

dragon1188

Posted
Posted

Drilling one or two holes is safest n simplest method. The hole should be located just below normal water level at output pipe. The hole however need maintenance as it will get block by algae over time. :-)

Depend on where the holes... If you have the check valve and the output pipe has restricted length, it will not sufficient to cut the back flow siphon....
Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Btw your SPS looks awesome bro. Make my saliva drip

Hi bro...

Mine is nothing....there are more nice sps reefer out there...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Bro Oceanviper...can also share some pictures of your cheato sump tank. Can the chaeto cope n water quality ok?

Hi bro...

Let me take and post it later...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

As mentioned, the picture below is my sump tank with the chaeto in place.

post-16802-0-26763100-1401148984_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Thks bro

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Got some purple ( not fully UV wavelength ) leds and probably will use it for night when all the leds are off.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Some casual shots of my current corals.

post-16802-0-34620200-1401982590_thumb.j

post-16802-0-98524700-1401982590_thumb.j

Galaxy Monti from fishchemist reefer

post-16802-0-34468100-1401982591_thumb.j

post-16802-0-68810900-1401982591_thumb.j

Pink millie where frag from the entire colony....

post-16802-0-06320200-1401982592_thumb.j

Green Monti from reefer Patrick back in year 2012

post-16802-0-40554300-1401982592_thumb.j

post-16802-0-79157100-1401982592_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 3 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Just to updates here.

Recently not much new addition aside from maintaining the tank.

New upcoming project would be the DIY led light dimmer controller.

Some parts ordered and pending for arrival.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
sherman Enthusiast

sherman

Posted
Posted

Hi Bro oceanviper, care to share which led light dimmer controller you have order and from where

I also intent to add a programmable dimmer controller for my 2 set of LED light

:thumbsup:

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling Nano Tank With FIlter and Chiller and Maxspect Jump L-130

      Selling the above. All Items Used for 3 months only. 1.Tank and HOB FIlter. (Tank size: L38cm x W30cm x H 28cm). Selling for $50 2.Maxspect Jump L130. Selling for $60 3. Chiller good for 60l. Selling for $80 Take all for $160. FCFS Collection only, Bukit Batok. PM me to deal.
      Zac in Sell off/Pasar Malam Shop
    2. 2

      Fluval Sea Marine & Reef LED 2.0

      Upz Sent from my SM-N980F using Tapatalk
      Shilamin in Sell off/Pasar Malam Shop
    3. 225

      WTS live rotifers, tigger pods, phyto

      ups tele me at littlefishaqua location at tamp/hougang $50 worth of purchase foc delivery
      MarineSeller in Sell off/Pasar Malam Shop
    4. 0

      Corals to sell/give

      Free - Have several GSP on tank wall. Can scrape and give to whoever wants Free several broken pieces of monti Also large size green monti for sale for $20 Zoa colony on rock $20 zoas with GSP (slightly bigger) $10 zoas only Medium size toadstool -$15 Collection 523608 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    5. 0

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma

      UQ毕业证【微信：A746103619】办理昆士兰大学毕业证 成绩单 留信认证The University of Queensland diploma ◆【咨询方式】 微信 ：A746103619 -----------------◆---------------------业务类型-------------------◆-----------------------------◆ 【主营项目】： ★★毕业証、成绩单-- OFFER--真实可查留信网认证等.等！ ★★办理各国各大学文凭（一对一专业服务，可全程监控跟踪进度） -----------------◆---------------------制作工艺-------------------◆-----------------------------◆ 【高仿真】： ★★凭借多年的制作经验本公司制作《激光》《水印》《钢印》《烫金》《紫外线》凹凸版，uv版等防伪技术一流，高精仿度几乎跟学校100%相同！让您绝对满意。 -----------------◆---------------------操作周期-------------------◆----------------------------◆ 【高效率】 ★★本公司承诺各位顾客在最短时间内制作完成并交货。不论您身在何处，只要您有需要，我们便会以最高效的办事效率满足您的需求，如果我们没有您所想办的学校那么只要您能提供版本我们就可以为您专门开版办理一周内完成。 -----------------◆---------------------公司理念-------------------◆-----------------------------◆ 【诚信为主】： ★★我們以質量求生存，.以服务求发展有雄厚的实力，专业的团队咨询顾问为您细心解答，可详谈，是真是假，眼见为实，让您真正放心，平凡人生,尽我所能助您一臂之力让我們携手圆您梦想! ◆【公司宗旨】：诚信为主，質量爲本，客戶爲先，解您所忧 ！ -----------------◆---------------------业务范围-------------------◆-----------------------------◆ 【主营国家】:加拿大、澳大利亞、新西蘭、新加坡、美國、英國、歐洲-----等等! -----------------◆---------------------联系方式-------------------◆-----------------------------◆ 【贴心专线】: 微信：A746103619 ★敬请保留此联系方式，以备用！如有不在线请给我们留言！我们将在第一时间给您回复! ★★此贴长年有效——欢迎各位新老顾客咨询，我们将会竭诚为您服务!
      imyosq2quv in LPS Coral forum
×
×
  • Create New...