Jump to content

DIY 200,000 Litre Pond


xnsdvd
 Share

Recommended Posts

  • SRC Member

think you are missing a roof top currently. It has started filling up water for u before u complete.

Tank Theme: Mixed Reef with clams

3 feet tank with IOS

Eheim 1262

K3 wavemaker x1

Lightings: T5 actinic blue x4 , T5 white x4

Skimmer: BMQQ

Artica 1/5

Dosing: NA

-----------------------------------------------------------------------------

Reefing is sharing. People with rotten mouth is sure a loser for life as expected. When a tomato gets rotten, you can nvr save it.. Throw it away before it infect the good ones.

Member of:

post-1182-0-60431600-1322062247_thumb.jppost-2241-0-43391700-1354511230.png

Link to comment
Share on other sites

  • SRC Member

That's true, NSW costs about $1.80/litre whereas ours costs about $2.10/litre.

But the salinity of NSW tends to be in the 17ppt to 27ppt range so in terms of salt content, the price is almost the same.

Then there's the problem of heavy metals like lead and cadmium that can be found in minute amounts(parts per billion) in NSW because of the shipyards in the area

Then there's the strange copper/hyposalinity resistant strains of ICH and Velvet you get from the straits of Johor that you have to kill before you can safely use the water.

And the logistic nightmare of the truck being able to only move 5000 litres per trip. This 200,000 litre pond would take a minimum of 80 trips back and forth between the beach and my house, I ran the numbers and it would've taken 8 days to fill it.

Much easier to just dump 7 tons of salt and let the rain do the work for you, it's monsoon season and the pond's already filled up half way from just 2 days of rain. I can fill the entire pond in just a day if I direct the rainfall off my roof. Parasite and heavy metal free too.

As for people who want to visit, you're all welcome! Watch for details on my company's facebook page;

http://www.facebook....267990176567810

Joseph! I called you for Kopi last month and you said you weren't free! Bring your kids over for a swim this time!

You can reach me at 98627310

Link to comment
Share on other sites

  • SRC Member

Just a thought. You could install underwater lights at the sides like those condominium swimming pools. So that you can observe the pond at night.

If you've been to a kelong you will know what I'm talking about.

Sometimes the good guys gotta do bad things to make the bad guys pay. - Harvey Specter

Link to comment
Share on other sites

  • SRC Member

How about a separate Jacuzzi section next to this.. then can "zim Zui" whilst enjoying your creation.. haaha

Sent from my GT-N7000 using Tapatalk 2

Link to comment
Share on other sites

That's true, NSW costs about $1.80/litre whereas ours costs about $2.10/litre.

But the salinity of NSW tends to be in the 17ppt to 27ppt range so in terms of salt content, the price is almost the same.

Then there's the problem of heavy metals like lead and cadmium that can be found in minute amounts(parts per billion) in NSW because of the shipyards in the area

Then there's the strange copper/hyposalinity resistant strains of ICH and Velvet you get from the straits of Johor that you have to kill before you can safely use the water.

And the logistic nightmare of the truck being able to only move 5000 litres per trip. This 200,000 litre pond would take a minimum of 80 trips back and forth between the beach and my house, I ran the numbers and it would've taken 8 days to fill it.

Much easier to just dump 7 tons of salt and let the rain do the work for you, it's monsoon season and the pond's already filled up half way from just 2 days of rain. I can fill the entire pond in just a day if I direct the rainfall off my roof. Parasite and heavy metal free too.

As for people who want to visit, you're all welcome! Watch for details on my company's facebook page;

http://www.facebook....267990176567810

Joseph! I called you for Kopi last month and you said you weren't free! Bring your kids over for a swim this time!

Rain water is normally acidic so you might need chemical to balance the pH..

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • SRC Member

Are you going to put any pond lining?

Cos cement pond will leach phosphate..

You can diy some sort of tidal gate to make waves .. Look up other forum they have some diy there

Selling big game fishing equipment. Stella 20k / 17k .. made in Japan jigging blue rose / kabuzu popping rod... pm for prices

Link to comment
Share on other sites

Also w just raw concrete you'll need to cure the pond. There are chemicals that will affect your fishes.

Another question is, during dry mths how are you going to do water top up?

Link to comment
Share on other sites

That's true, NSW costs about $1.80/litre whereas ours costs about $2.10/litre.

But the salinity of NSW tends to be in the 17ppt to 27ppt range so in terms of salt content, the price is almost the same.

Then there's the problem of heavy metals like lead and cadmium that can be found in minute amounts(parts per billion) in NSW because of the shipyards in the area

Then there's the strange copper/hyposalinity resistant strains of ICH and Velvet you get from the straits of Johor that you have to kill before you can safely use the water.

And the logistic nightmare of the truck being able to only move 5000 litres per trip. This 200,000 litre pond would take a minimum of 80 trips back and forth between the beach and my house, I ran the numbers and it would've taken 8 days to fill it.

Much easier to just dump 7 tons of salt and let the rain do the work for you, it's monsoon season and the pond's already filled up half way from just 2 days of rain. I can fill the entire pond in just a day if I direct the rainfall off my roof. Parasite and heavy metal free too.

As for people who want to visit, you're all welcome! Watch for details on my company's facebook page;

http://www.facebook....267990176567810

Joseph! I called you for Kopi last month and you said you weren't free! Bring your kids over for a swim this time!

Ya, very sorry was busy preparing MASS projects, now left with 2 more in Dec.

Shanon, any reasons why you did not consider using liners? I know of a few concrete ponds that struggle with heat during sunny days.

  • Like 1

"Reefs, like forests, will only be protected in long term if they are appreciated"
Dr. J.E.N. Veron
Australian Institute of Marine Science


-----------------------------------------------------------------------

Member of:

post-1182-0-60431600-1322062247_thumb.jp

post-2241-0-43391700-1354511230.png

UEN: T08SS0098F
Please visit us here: http://www.facebook....uaristSocietySG
Facebook Group: http://www.facebook....gid=34281892381

Link to comment
Share on other sites

  • SRC Member

Really wonder how things gona turn out. This one must have planning and research done a lot.. filtration, skimmer must be super huge, waves, top ups... List go one..cant imagine.

Looks good for a koi pond though..

Link to comment
Share on other sites

  • SRC Member

I'll attempt to answer the questions so far:

Rain Water Acidity

Definitely a big concern. But I'll be dumping a few tons of fine aragonite sand as well as allowing a 12.8m3 artificial live rock wall to cure in the water. Should settle the pH. And even if it doesn't the fish, coral, invertibrates and plants I'm throwing in are all intertidal organisms so they can handle the fluctuations with little problem.

Pond Liners

Aside from not being able to find a supplier, I just prefer using epoxy. In this case I have 70 litres of Jotun's "Penguard HB" excellent, fish safe product. And I got it in white to help reduce the IR absorbtion. This will also take care of the minerals leeching out of the concrete.

Filtration

I actually built a 12,000 litre prototype that I've been running for about 2 years now. Haven't had a single water change in all that time because of the 4000 litre sump that's full of Caulerpa and seagrass and mangrove trees. But I do have to add Mg, Ca, K, Fe, etc on a regular basis to keep everything healthy. Even with 2000+ fish averaging 200g each, my nitrates are holding steady at 12ppm and ammonia at 0.25ppm. Nowhere near as clean as the average reef tank of course, but I'll be implementing improvements on the 200,000 litre tank.

Skimmer

This'll actually be a DIY project all on it's own. Fortunately I have a friend that wholesales acrylic. If anyone wants his contact, let me know. Not sure if I'm allowed to advertise for him :P

Top Up

Got a 2000 litre storage tank for rainwater collection. I doubt it'll be enough, but we'll just have to wait and see. :dunno:

Roof

This will come up AFTER the pond is built. I actually had to sacrifice my BBQ pit for the pond, so I'll be building a trellis strong enough to support a party and BBQ on top of the pond. That way if anyone falls through, the sharks will get rid of the evidence... :evil:

You can reach me at 98627310

Link to comment
Share on other sites

Very impressive DIY!! :thumbsup:

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

If you are going to have shelter. Maybe you can include solar tube ... Or better a auto retractable roof when rains

Selling big game fishing equipment. Stella 20k / 17k .. made in Japan jigging blue rose / kabuzu popping rod... pm for prices

Link to comment
Share on other sites

  • SRC Member

Yeah. Like solar panel to power up things if feasible or backup power

Heh heh, I love how we're all on the same page. I'm actually going to be installing PV panels, batteries and an inverter over the next year all off-grid so I don't have to get permission from PUB.

You can reach me at 98627310

Link to comment
Share on other sites

Hi bro, as shanon mentioned b4: the pond will be about 2.2m deep with 10 Tsurumi 50 TM 2.45(S)s moving 200,000 litres of water through 12.8m3 of crushed coral every hour for filtration.

Very interesting thread. *like* Cheers

  • Like 1
Link to comment
Share on other sites

  • SRC Member

seems more like its gonna be more of 1.2m deep, correct me if i'm wrong.... worrying factor on such open system is rain water -- with unpredictable rainfalls that causes "ponding" in parts of Singapore, it might be a big issue to keep the salinity levels stable. Nonetheless this is a very good project and it would be good to see it in person.... is this gonna be a fowl or full reef tank?

Link to comment
Share on other sites

  • SRC Member

@#$%!! One of the walls just broke while I was backfilling! :poster_oops: Pictures of the disaster to come!

Reefer guy:

- The walls aren't fully built yet. So they've got about 1.6m to go. We'll finish that part after we've finished work on the floor. Or else there's no way to get equipment into the pond.

- As for the lack of a roof.. same problem, I can't get my heavy machinery in with the roof in the way, and I need a way to cure the pond first, so letting the monsoon rains do the work for me is really the best thing.

- FOWLR with seagrass to start, but once it's more stable I'll start throwing in the giant clams and corals. No worthwhile experience with corals though.

  • Like 1

You can reach me at 98627310

Link to comment
Share on other sites

  • SRC Member

I'm quite happy with the quality of the work we did.. I know it's butt ugly and uneven, but hey! they fish don't care! I'll upload more photos when I can, for now, here's a shot from the balcony!

IMG_1125.jpg

You can reach me at 98627310

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...