Jump to content

WEEKLY SHIPMENT UPDATES: 30th-July-to-05th-Aug


Recommended Posts

Very sorry to post my displeased here...

Recently I've bought Crystal Pro refilling resin (box package) from AM. To my astonishment, reading from test meter indicates 10ppm and 6ppm from both resins each respectively. I headed back to AM and did an exchanged. To make matter worst, reading from NEW resins worsened (55ppm and 18ppm)!! Just wanna know if anyone experiences such mishap? Any kind soul here care to share their bad experiences here.

It's very frustrating for all that inconveniences as I'm residing in the west area.

Is this the first time changing.. From my knowledge, you are supposed to "flush" the new resin for 15 to 30 mins.. then you test the Tds..

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

  • SRC Member

Pinnacle got a vroliki mimic tang. Abit injured and skinny though.

And a very nice orange bta with red tips at the overflow section in the anemone shallow tank.

Ah beng not much fishes. A few asfur angels remains.

Quis custodiet ipsos custodes

Too many people spend money they haven't earned to buy things they don't want to impress people they don't like.

Link to comment
Share on other sites

Have u tried to turn on the tap water smaller? This may help.

When in use, low flow rate is used. Reading worsened after 10mins flushing.... It's really frustrating!!

I share knowledge, interest & passion in reefing.. NOT by showing them off...

Link to comment
Share on other sites

Is this the first time changing.. From my knowledge, you are supposed to "flush" the new resin for 15 to 30 mins.. then you test the Tds..

Such issue has never happen with me. Previous readings from former resins always gives a solid 0 Or 1. NO flushing required. I was informed by AM staff that such issue is not surprising. It baffles me as to why such regrettable recurrence should be prevented when Crystal Pro has been in the market for sometime alread???

I share knowledge, interest & passion in reefing.. NOT by showing them off...

Link to comment
Share on other sites

  • SRC Member

Any advise on The pinnacle SPS price?? Thank

The price for the SPS ranges from SGD25 ~ SGD60...

Depends on the type...Of course can nego a bit if you buy more....

This is the rainbow monti saw at Pinnable...

post-16802-0-47117800-1344182540_thumb.j

Anyone can ID this birdnest?

post-16802-0-95108200-1344182618_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Such issue has never happen with me. Previous readings from former resins always gives a solid 0 Or 1. NO flushing required. I was informed by AM staff that such issue is not surprising. It baffles me as to why such regrettable recurrence should be prevented when Crystal Pro has been in the market for sometime alread???

Try calibrating your test kit?

Fresh fishes and inverts! What's next? To the salty side of marine of course!:)

"Never to part, lest jealous heaven stole our hearts"

Link to comment
Share on other sites

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling corals Zoas

    2. 1

      Coral Decom Sale

    3. 0

      WTS: Yellow oxide Zoa

    4. 1

      Coral Decom Sale

×
×
  • Create New...