SRC Member netviper Posted October 16, 2012 SRC Member Share Posted October 16, 2012 forgot to add... am skimming my tank with two skimmer but the algae still growing on frag stand...why is this so? any ideas? using red sea prism and bm nac 3+ U need to check ya po4 level. Anyway, my po4 is undetectable but i still gets algae too. U juz need some cleaning crews to do some algae control. Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 18, 2012 Author SRC Member Share Posted October 18, 2012 U need to check ya po4 level. Anyway, my po4 is undetectable but i still gets algae too. U juz need some cleaning crews to do some algae control. dont trust cleaning crew... had a hermit and it ate up my hammer...have blue tang .. dont go near to frag stand...cheers Quote Link to comment Share on other sites More sharing options...
Admiraltian Posted October 18, 2012 Share Posted October 18, 2012 dont trust cleaning crew... had a hermit and it ate up my hammer...have blue tang .. dont go near to frag stand...cheers Your hermit got some ferorious appetite. Why dun go near frag stand? Quote Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture. Lightings : Ecotech Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank. Chiller : Dalkin 1hp compressor with build-in drop coil. Skimmer : Skimz Octa SC205i Protein Skimmer. FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos. CR : Skimz Monzter E Series CM122 Calcium Reactor. BPR: Marine Source Biopellet Reactor with Continuum Reef Biopellet Fuel. Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump. Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M Sine Wave Pump for Frag Tank. Water Top Up: AutoAqua Smart ATO Lite. Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 18, 2012 Author SRC Member Share Posted October 18, 2012 hermit very guai in my previous tank, but transfer to this tank maybe no food cause i remove the sand so it start eating corals. or maybe it just crawed over hammer and pulled out all the tissue. Quote Link to comment Share on other sites More sharing options...
SRC Member netviper Posted October 19, 2012 SRC Member Share Posted October 19, 2012 U can get turbo snails or sea hare for algae control, doesn't need to be hermit. I dun find blue tang good in clearing algae, I prefer yellow tang instead. Quote Link to comment Share on other sites More sharing options...
sherman Posted October 19, 2012 Share Posted October 19, 2012 Urchin is a good algae controller. You can try. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 23, 2012 Author SRC Member Share Posted October 23, 2012 worms Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 23, 2012 Author SRC Member Share Posted October 23, 2012 sps from netviper... polyp extending well just cannot really see Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 23, 2012 Author SRC Member Share Posted October 23, 2012 new scape with more rock Quote Link to comment Share on other sites More sharing options...
samuel88 Posted October 23, 2012 Share Posted October 23, 2012 Hi, just wanted to know do you use tap water or RO/DI or Ro or Di water only? Quote Link to comment Share on other sites More sharing options...
Admiraltian Posted October 23, 2012 Share Posted October 23, 2012 new scape with more rock Juz curious, how come one side of your rocks are so blackish and brown dark colored? The other side which are more white, on the left are new LR? Quote Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture. Lightings : Ecotech Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank. Chiller : Dalkin 1hp compressor with build-in drop coil. Skimmer : Skimz Octa SC205i Protein Skimmer. FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos. CR : Skimz Monzter E Series CM122 Calcium Reactor. BPR: Marine Source Biopellet Reactor with Continuum Reef Biopellet Fuel. Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump. Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M Sine Wave Pump for Frag Tank. Water Top Up: AutoAqua Smart ATO Lite. Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 23, 2012 Author SRC Member Share Posted October 23, 2012 Hi, just wanted to know do you use tap water or RO/DI or Ro or Di water only? using tap water with seachem prime only. cheers Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 23, 2012 Author SRC Member Share Posted October 23, 2012 Juz curious, how come one side of your rocks are so blackish and brown dark colored? The other side which are more white, on the left are new LR? yep, just bought abt 2kg of lr from henry on monday. Quote Link to comment Share on other sites More sharing options...
SRC Member netviper Posted October 23, 2012 SRC Member Share Posted October 23, 2012 sps from netviper... polyp extending well just cannot really see Think it got bleached, maybe u want to lower it down from getting too much light. Quote Link to comment Share on other sites More sharing options...
SRC Member netviper Posted October 23, 2012 SRC Member Share Posted October 23, 2012 U need to test ya parameters n make sure its at good levels. Else just go for lps 1st which is more forgiving. Quote Link to comment Share on other sites More sharing options...
SRC Member netviper Posted October 23, 2012 SRC Member Share Posted October 23, 2012 using tap water with seachem prime only. cheers Try to use distilled water. Tap water is usually the cause of high PO4 which in term cause algae bloom. Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 24, 2012 Author SRC Member Share Posted October 24, 2012 Think it got bleached, maybe u want to lower it down from getting too much light. should have as one time kh rose to 24 dkh in my tank... might also be light problem as last time b4 i fragged it it was at the top of my tank on the frag stand. cheers Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 28, 2012 Author SRC Member Share Posted October 28, 2012 brainy Quote Link to comment Share on other sites More sharing options...
SRC Member John Deroe Kenedy Posted October 28, 2012 SRC Member Share Posted October 28, 2012 brainy is it my eyesight.. or is that bleaching.. using tap water with seachem prime only. cheers If u dont have RO/DI system, buy Life Distilled Water at NTUC... 2 x1.5L bottles = 95cens For ur algae issue, Its becoz of u using tap water with just seachem prime. I dont really think that cleaners do much work. They are controllers but they are slow. GBPo4, i dont really know how it works, i tried using it in my nano last time, but my tank still have massive algae growth. . I would highly recommend u to buy a FR to run RowaPhos which u can hang it outside of the IOS. FR+Rowaphos really helps, it removes Po4 n preventing Algae to consume them. I got mine free of algae within 1 week. If u dun want to have an FR, just use it in the filter bag provided, and dump it at a high flow place. But i still suggest using a FR coz rowaphos does better in a reactor. Quote Teh'sTankSetup Decomm on 18/8/2012 Tank: 2x1x1 Rimless Tank (Sumpless) Lighting: Aquazonic 2x24watts T5 (Actinic x Sun White) Moonlight: Acardia 1W Led Light (Blue) Filter: ISTA Max Care Cannister Skimmer: Bubble Magus E3 Chiller: Resun CL450 (Aquazonic Evo Pump) Wave: Boyu WM-25 Commissioned 20/9/2012 Tank: 3x2x2.5 Lighting: 250w DeLighting MH/ 2x 39w Delighting Diy T5 ATI Blue Plus Skimmer: H&S Skimmer Type 110-F2000 Chiller: CL450 (Aquazonic Evo Pump) Return Pump: Eheim 1260 Reactor: D&D H2Ocean FMR 75 (ADA 1500 Pump)(Rowaphos) Wavemaker: 2x SunSun Wavemaker (3000L) Incoming: Conch ll Basic ATO System/Tunze Osmolator Magic Marine 3CH Dosing Pump Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 28, 2012 Author SRC Member Share Posted October 28, 2012 is it my eyesight.. or is that bleaching.. If u dont have RO/DI system, buy Life Distilled Water at NTUC... 2 x1.5L bottles = 95cens For ur algae issue, Its becoz of u using tap water with just seachem prime. I dont really think that cleaners do much work. They are controllers but they are slow. GBPo4, i dont really know how it works, i tried using it in my nano last time, but my tank still have massive algae growth. . I would highly recommend u to buy a FR to run RowaPhos which u can hang it outside of the IOS. FR+Rowaphos really helps, it removes Po4 n preventing Algae to consume them. I got mine free of algae within 1 week. If u dun want to have an FR, just use it in the filter bag provided, and dump it at a high flow place. But i still suggest using a FR coz rowaphos does better in a reactor. no idea it is bleaching. lol. got it from sl abt 2 days ago. as for fr might go for second hand ones but first must replace my lightset b4 it trips the whole house again. cheers Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 28, 2012 Author SRC Member Share Posted October 28, 2012 if i buy distilled water must buy at least 40 bottles a month.heavy... Quote Link to comment Share on other sites More sharing options...
Admiraltian Posted October 28, 2012 Share Posted October 28, 2012 if i buy distilled water must buy at least 40 bottles a month.heavy... I used to do the same thing as u, adding dechlorinator to tap water for top up and salt water mixing. In the end all my rocks has to be throw away due to the massive algae invasion. Had to spend even more on buying live rock and nsw change. Quote Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture. Lightings : Ecotech Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank. Chiller : Dalkin 1hp compressor with build-in drop coil. Skimmer : Skimz Octa SC205i Protein Skimmer. FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos. CR : Skimz Monzter E Series CM122 Calcium Reactor. BPR: Marine Source Biopellet Reactor with Continuum Reef Biopellet Fuel. Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump. Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M Sine Wave Pump for Frag Tank. Water Top Up: AutoAqua Smart ATO Lite. Link to comment Share on other sites More sharing options...
SRC Member John Deroe Kenedy Posted October 28, 2012 SRC Member Share Posted October 28, 2012 u can order that bottled water at fairprice website.. 1 carton of 12s 1.5L is $5.90.. Delivery charge $10 for $60 spent or below $7 for above $60.. If u need like 40 bottles = 4 cartons (48) I will be like $34.40 Its a better money spent rather then trying to get Algae off by buying addictives.... If u wanna save alot of money... Maybe at the moment u use DI Bottle water, save up some cash n get a RO/DI unit... Quote Teh'sTankSetup Decomm on 18/8/2012 Tank: 2x1x1 Rimless Tank (Sumpless) Lighting: Aquazonic 2x24watts T5 (Actinic x Sun White) Moonlight: Acardia 1W Led Light (Blue) Filter: ISTA Max Care Cannister Skimmer: Bubble Magus E3 Chiller: Resun CL450 (Aquazonic Evo Pump) Wave: Boyu WM-25 Commissioned 20/9/2012 Tank: 3x2x2.5 Lighting: 250w DeLighting MH/ 2x 39w Delighting Diy T5 ATI Blue Plus Skimmer: H&S Skimmer Type 110-F2000 Chiller: CL450 (Aquazonic Evo Pump) Return Pump: Eheim 1260 Reactor: D&D H2Ocean FMR 75 (ADA 1500 Pump)(Rowaphos) Wavemaker: 2x SunSun Wavemaker (3000L) Incoming: Conch ll Basic ATO System/Tunze Osmolator Magic Marine 3CH Dosing Pump Link to comment Share on other sites More sharing options...
SRC Member inwear Posted October 28, 2012 SRC Member Share Posted October 28, 2012 brainy nice brain. . Aust coral? Quote Link to comment Share on other sites More sharing options...
SRC Member starfish123 Posted October 28, 2012 Author SRC Member Share Posted October 28, 2012 not sure. got it at sl display tank for 2 red. they clearing out already Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.