Jump to content

DIY LED Lighthing

oceanviper

By oceanviper,
in DIY Forum

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

post-16802-0-37824800-1338974323_thumb.j

This is my currrent 3ft LED lighting which I'm now in the midst of designing a smaller version due to some changes in the coverage area.

post-16802-0-37599000-1338974373_thumb.j

Connector which will be used in this project ( similar as the earlier version ).

post-16802-0-07436400-1338974424_thumb.j

1/2 builded LED casing using acrylic.

post-16802-0-38810600-1338974693_thumb.j

Aluminium sheet used for mounting the LEDs.

post-16802-0-29623200-1338974838_thumb.j

LED arrangement

RED led --> orange color

Blue led --> green color

White led --> yellow color

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Just some arrangement updates on the fixture with some driling not shown in the picture done yesterday night...

post-16802-0-34626600-1339635994_thumb.j Top view of the fan.

post-16802-0-92224300-1339636057_thumb.j Testing out on the fixture fitting.

post-16802-0-90580000-1339636090_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted
any updates? (:

Done up on the LEDs wiring on the aluminium plate but not yet connect to the main connector.

interesting project. how is it going?

Still in progress slow cause have to cope with current lighthing.

bro did you use any optics for your LEDs?

The currently using 3ft not using any external ( the LEDs has the 60deg lens built-in.

where did you get your LEDs from? Driver as well?

I'm getting LED from china ( china source previously from another reefer BO ).

The LED driver is MeanWell.

Thks.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 3 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted
Will it be easy to get the items needed from our local hardware shops?

Hi bro...

For the items, mostly available aside on the LEDs which depends from the supplier you want to use...

The rest are easily get in SG.

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 4 weeks later...
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

interesting there.

what LED lens are you using? 80-90?

The lens is 60deg.

And what led emitter are you using?

Is a china brand

What coral are you keeping?

LPS and SPS.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Did few modification on the casing.

Just done up for one as shown below.

post-16802-0-47461700-1345645386_thumb.j

post-16802-0-66519100-1345645421_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Similar Content

  • Topics

  • Latest Update

    1. 2

      Wts: LA lakers & Hallucination zoas

      Hallucination zoas sold out. LA lakers available
      Alypapa in Sell off/Pasar Malam Shop
    2. 2

      Equipments to sell

      Prices revised to clear as need space. Trident - $500 AI Fuge lights (with box and new driver/led) - $200 Neptune DOS - $200 Sent from my FCP-N49 using Tapatalk
      Jimbo in Sell off/Pasar Malam Shop
    3. 0

      WTS and FOC Tanks & Stuff

      Hey everyone, I've got the following for sale. They have been with me for around a year or less. Well taken care of. 1. Long fish tank, 90x30x45 - beautiful glass, well taken care of, no scratches - $30 2. Standard fish tank, 60x45x45 - beautiful glass, as you can see, still with bottom and top cardboard covers. - $30 3. Metal stand for the long tank - rusted by strong. Usable. Please note the width of this stand is 50, and the long tank's width is 30, so there's around 15 cm space - Free 4. Nano tank, well taken care of. Beautiful glass - 25cmx27cmx20cm - $30 5. Seachem Filter Tidal 35 - $30 6. Wavemaker - $10 7. Redsea Foundation (Powder): Calcium, Magnesium, Alkalinity. Got from fellow hobbyist, opened, but decided not to continue with reefing. 1 Kg sized. $8/btl. Get one of the above tanks and you can get one of the following free (seen in pictures): - baby tank - oxygen pumps - plastic fish tank protein skimmer - portable fan - half pack of Caribsea Aragonite sand Self-collection at Indus Road. PM if keen.
      homme143 in Sell off/Pasar Malam Shop
    4. 0

      WTS: Macro Rock scape

      Letting go rockscape. Pm if interested Sent from my iPhone using Tapatalk
      ycyc87 in Sell off/Pasar Malam Shop
    5. 0

      FOC Coral Bandid Shrimp

      Hi, I'd need to give away my CBS named Shadow. He's a decent sized guy, been with me for a few months, a darling of a shrimp. But he's started attacking my small fish, fish have gone missing through the months, few have died the past week. Unsure him or anything else. My current fish are all healthy. Free of charge. Just promise to take good care of him. Please quarantine him first, or put him in a fishless setup for a few weeks. Self collect at Indus road. Cheers.
      homme143 in Sell off/Pasar Malam Shop
×
×
  • Create New...