Jump to content

My Reefing Chronicles


Admiraltian
 Share

Recommended Posts

Some additions of fishes:

Chevron tang, juvenile one.Posted Image

Platinum clownfish.

Posted Image

Also got a frag of pink stylo.

Posted Image

Realised some of my frags turning green or brown despite my dd nitrates and phosphate test kit testing to be zero. Dunno wats wrong. And it only occurs on small frags or colonies.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Got some issues with my montis over-encrusting and spreading on my rockscape. Juz wondering what do the rest of u guys do, scrape it off or able to frag off the rocks which seem quite difficult as it's only a thin layer of crust on the LR.Posted ImagePosted Image

Another thing I realised on my red monti is the white spots that looked like bite marks but so far I haven't spot any aefw when I check on my montis at nite.Posted Image

Hopefully it's not aefw or any unwanted pests.

Most of the cyano in my tank is gone after I started dosing FM marine bakto blend. But still have some red hair algae on some of my rocks most notably on my zoas rock. And it's has prevent my zoas from opening and growing. Will probably get some cuc that eats them to get rid of these nuisance algae.Posted Image

My tank almost full now and can only house one last small colony of sps and here it is. A teal green acro, not too sure of its id though.

Posted Image

And last but not least a fts after many mths.Posted Image

Thanks for reading.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Get a melanurus wrasse. My tank alot nudi, after put it in, those nudis gg LOL

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

I also have the same issue. Leaving it as it is.Sent from my GT-I9300 using Tapatalk
Ya, guess there's nothing much I can do here except maintaining gd husbandry and hope that the colors will return.
AEFW don't eat montis, might be monti-eating nudis!
Thanks for clarifying, bro.
Get a melanurus wrasse. My tank alot nudi, after put it in, those nudis gg LOL Sent from my GT-N7105 using Tapatalk
Thanks for the advise, bro. Will try to look out for one.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Henry and CF Still have. U buy 1 at henry can buy 4 in CF hahah

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Henry and CF Still have. U buy 1 at henry can buy 4 in CF hahah Sent from my GT-N7105 using Tapatalk
Ha ha, but CF very far & out of the way.
And last but not least a fts after many mths.y8u3udy6.jpg Very nice tank bro...hope I visit you to learn how to keep SPS
Sure but I'm not expert level yet. We can exchange pointers on reef keeping.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • 2 weeks later...

Gotten these 2 fishes from AM. Posted ImagePosted Image

Was told this is melanurus wrasse, any bros can help id it?

Also bought a algae blenny.Posted Image

Hope it can help to eat some of the hair algae growing on my rocks.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Gotten these 2 fishes from AM. Posted ImagePosted Image

Was told this is melanurus wrasse, any bros can help id it?

Also bought a algae blenny.Posted Image

Hope it can help to eat some of the hair algae growing on my rocks.

Yup, melanurus wrasse (:

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Yup, melanurus wrasse (:

Sent from my GT-N7105 using Tapatalk

I beg to differ.

Definitely not a melanurus as they have striped body as opposed to a network of green and pink in this.

Try Halichoeres argus. This should be it:)

Thks bros for the id. Definitely looked more like Argus wrasse than Melanurus wrasse. But there r also some sites that id it as melanurus but most id it as H. Argus. Even I was told it was a melanurus at the shop. But the most important thing is, can it get rid of monti eating nudis? Will be monitoring.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Thks bros for the id. Definitely looked more like Argus wrasse than Melanurus wrasse. But there r also some sites that id it as melanurus but most id it as H. Argus. Even I was told it was a melanurus at the shop. But the most important thing is, can it get rid of monti eating nudis? Will be monitoring.

The genus Halichoeres contains a variety of "melanurus" look-alike(some of which I also cannot really id).

This popular genus also contains many popular and well-known pest-busters such as Halichoeres leucoxanthus. Whether or not nudi-eating I cannot assure, but it would be good to monitor and give it a shot I suppose. As in the wild, these fellows are not obligate nudi eaters and its only in the aquaria that aquarists document them as effective nudi-eaters.

No matter what, I hope it will for you and wish you all the best!

Link to comment
Share on other sites

  • SRC Member

Ops ps for the wrong id! Didn't know hali variety got look alike. But do let us know if it can get rid of nudi! My melanurus got 3 Short stripe down like (scar) from the top body btw. haha

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

  • 1 month later...

Ops ps for the wrong id! Didn't know hali variety got look alike. But do let us know if it can get rid of nudi! My melanurus got 3 Short stripe down like (scar) from the top body btw. haha

Sent from my GT-N7105 using Tapatalk

The argus wrasse rip after a few wks so it didn't really perform its task. But anyway, I have concluded there's no nudis as til now I haven't seen any. The red monti also kinda recovering slowly on its own. I guessing its could be burnt marks from intense lighting.8e6eqyny.jpg

Anyway its CNY eve, time for me to do a quick update. Some of my sps colonies still having stn issues. I guessing it could be due to not sufficient light shining to its base. Any experts can advise?

Gotten some new corals, all some pics...

M. Setosa

a2a4a8ag.jpg

Lobo

8e3ehemy.jpg

Some chalices, first time keeping, hope they will do well in my tank.

6azu6azu.jpg

6uhabu6a.jpg

Anchor hammer

upy7aqur.jpg

That's all for the update, wishing all Chinese reefers happy & prosperous lunar new year in advance.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • 4 weeks later...

Long time never update. Nothing much have changed except I had added a flame angel and an open brain coral. zu6ujemu.jpg

hu7ypuse.jpg

The flame angel have a little ich on it but so far its healing and feeding very well. But I also realised after its introduction some of my sps, mainly montis and digi have not been opening well, no pe at all during daytime. But so far I have not seen it nipping on my corals except on the German blue digis. Still monitoring the situation.

Another thing I noticed is my rabn have become very thin in branches and tips always have dirt and algae covered with little or no pe. As it grew and started branching out, it became thinner and thinner. Anyone experienced this before and can advises on this? Thanks.

yge3aqez.jpg

Lastly, ending my update with an fts. This is my la sarp tank.

tujabejy.jpg

Thanks for viewing. :)

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Awesome. ...

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Long time never update. Nothing much have changed except I had added a flame angel and an open brain coral. Posted Image

Posted Image

The flame angel have a little ich on it but so far its healing and feeding very well. But I also realised after its introduction some of my sps, mainly montis and digi have not been opening well, no pe at all during daytime. But so far I have not seen it nipping on my corals except on the German blue digis. Still monitoring the situation.

Another thing I noticed is my rabn have become very thin in branches and tips always have dirt and algae covered with little or no pe. As it grew and started branching out, it became thinner and thinner. Anyone experienced this before and can advises on this? Thanks.

Posted Image

Lastly, ending my update with an fts. This is my la sarp tank.

Posted Image

Thanks for viewing. :)

i love the shape and scaping of your tank! Very nice!

Not too sure about why your BN is thinning out though. For mine, normally having dirt or algae on them

is a good indication of a

lack of flow around it.

"Save a reef, grow your own"

Link to comment
Share on other sites

Awesome. ...

Thanks, bro. Your tank is juz as awesome.

i love the shape and scaping of your tank! Very nice!

Not too sure about why your BN is thinning out though. For mine, normally having dirt or algae on them

is a good indication of a

lack of flow around it.

Thanks for your advice, bro. I have tried tuning the flow of my tank higher but doesn't seem to work. Leaving it as it is now. Realised the "radioactive-ness" became less luminous than before. Signs of bleaching??? Love the reef-scaping of your tank too. Hope to guai and view your tank some day.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Long time never update. Nothing much have changed except I had added a flame angel and an open brain coral. zu6ujemu.jpg

hu7ypuse.jpg

The flame angel have a little ich on it but so far its healing and feeding very well. But I also realised after its introduction some of my sps, mainly montis and digi have not been opening well, no pe at all during daytime. But so far I have not seen it nipping on my corals except on the German blue digis. Still monitoring the situation.

Another thing I noticed is my rabn have become very thin in branches and tips always have dirt and algae covered with little or no pe. As it grew and started branching out, it became thinner and thinner. Anyone experienced this before and can advises on this? Thanks.

yge3aqez.jpg

Lastly, ending my update with an fts. This is my la sarp tank.

tujabejy.jpg

Thanks for viewing. :)

V nice.

Link to comment
Share on other sites

Thanks, bro. Your tank is juz as awesome.

Thanks for your advice, bro. I have tried tuning the flow of my tank higher but doesn't seem to work. Leaving it as it is now. Realised the "radioactive-ness" became less luminous than before. Signs of bleaching??? Love the reef-scaping of your tank too. Hope to guai and view your tank some day.

Yup i agree. Best not to fix it if it isn't broken...or too broken. Haha. Common mistake i made previously is getting too reactive when i sense something very minor amiss. Corsls are hardier than what most people think. Keep the updates coming...and u are most welcome to come my place anytime too.

Sent from my Nexus 7 using Tapatalk

"Save a reef, grow your own"

Link to comment
Share on other sites

Wah bro very nice. you change scaping already ah? Look so different from my memory lol.
Thanks for the compliment, bro. Some corals died so added some new ones so might looked different from last time. Some sps also grew bigger so the scape also changed due to the growth.
Yup i agree. Best not to fix it if it isn't broken...or too broken. Haha. Common mistake i made previously is getting too reactive when i sense something very minor amiss. Corsls are hardier than what most people think. Keep the updates coming...and u are most welcome to come my place anytime too. Sent from my Nexus 7 using Tapatalk
I read in someone's thread recently, the lost of luminous polyps and tips covered by algae and dirt is due to too high flow and not low flow. That reefer relocated his rabn and became ok after that. I hv relocated it slightly inside left, hope it helps. Thanks for your advice again, bro.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      滑铁卢大学申请学校UW毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Western Ontario

    2. 0

      新南威尔士大学毕业证丢失UNSW毕业证成绩单Q/微993398773办理澳洲大学毕业证学位证留信认证留服认证教育部认证回国证明澳洲本科学位证硕士文凭成绩单University of New South Wales

    3. 0

      多伦多大学申请学校UT毕业证成绩单信封Q/微993398773办理加拿大大学毕业证文凭留信认证留服认证教育部认证回国证明加拿大本科文凭硕士学位证毕业证University of Toronto

    4. 0

      亚利桑那大学未正常毕业UA毕业证书Q/微993398773办理美国大学毕业证成绩单留信认证留服认证教育部认证回国证明美国本科文凭硕士学位证毕业证 University of Arizona

    5. 0

      悉尼大学毕业证丢失USYD毕业证成绩单Q/微993398773办理澳洲大学毕业证学位证留信认证留服认证教育部认证回国证明澳洲本科学位证硕士文凭成绩单University of Sydney

×
×
  • Create New...