Jump to content

Lawchan marine tank part 2


lawchan77
 Share

Recommended Posts

  • SRC Member

Nice, That is the ATI power module not sunpower. =)

oh ya. should be power module.

  • Like 1

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

wow thats alot of light you going to have

now all corals have light.. easier to scape also cos less areas have over cast shadows.

i use the ATI as a supplement.. so its only used for about 6 ~ 8 hours per day while the radions will perform the usual sunrise & sunset.

the tank now very bright and the colours seem to 'pop' out.... will take a pic tonight and post.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

some pictures on how radion and ATI is installed.

Front view

IMG_1783.jpg

side view

IMG_1784.jpg

other side

IMG_1785.jpg

top view

a customized pc of acrylic sheet to fit the 3 radions together. this way, each radion height, height and distance is uniform. no need to adjust string by string. so troublesome and time consuming.

IMG_1786.jpg

Wow.. Your tank is must be even better when the light is on. Please share with us more photos.. :yahoo:

Link to comment
Share on other sites

Impressive lightings equipment!!

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

many reefers are supplementing T5 with LED / MH. hope with this configuration, can turn my purple valida back to its original colour.

Pictures taken with iphone4 camera.

Radion only

IMG_1788.jpg

IMG_1789.jpg

IMG_1790.jpg

IMG_1791.jpg

IMG_1792.jpg

IMG_1793.jpg

Radion + ATI

IMG_1810.jpg

IMG_1811.jpg

IMG_1812.jpg

IMG_1807.jpg

IMG_1808.jpg

IMG_1809.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Wah.. damn impressive tank!

When got open house for everyone to see?!

Haha

anytime bro.. can organise gathering at my place.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

finally released my 2nd pair of clownfish (snowflake and black ice) after more than a month after i released the picasso pair.

sadly, the snowflake seems to have an eternal hatred against picassos. it was getting along great with the black ice in the betta box but once released into the main tank, it turned against the picasso and dominated their RBTA home. didnt want to share and also ignored the 2nd RBTA it hosted in the betta tank for over a month.

sigh.. no choice but had to remove the snowflake leaving the black ice. amazingly the black ice is more willing to share and now all 3 are hosting the RBTA together.

IMG_1815.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

got myself another pc of black ice from Fuel on saturday.

now to get the new black ice to be anemone frenly too..

will get the old timer black ice help.. hee..

never seen an anemone before

IMG_1840.jpg

IMG_1836.jpg

IMG_1835.jpg

15 mins later.. TADAAA!!!!

:yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo:

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

got myself another pc of black ice from Fuel on saturday.

now to get the new black ice to be anemone frenly too..

will get the old timer black ice help.. hee..

never seen an anemone before

IMG_1840.jpg

IMG_1836.jpg

IMG_1835.jpg

15 mins later.. TADAAA!!!!

:yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo: :yahoo:

awesome!!!!

Link to comment
Share on other sites

  • SRC Member

thanks bros..

yes.. the black ice fuel chosen for me is really nice. matches my 1st pc very well..

after 1 night together, i noticed that the 1st black ice seem to be dominating the RBTA.. maybe just trying to show whose boss.

sure hope they can get along.

now i dont know if i will end up with 2 RBTAs in my tank...

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

walt smith shipment tank update

FTS

IMG_1954.jpg

right

IMG_1957.jpg

left

IMG_1958.jpg

up close and personal

IMG_1961.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Bro, your tank getting more and more power.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Powerful, Walt smith sps very hard to maintain the colour, and u r able to do that. Thumb up. :)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

Bro, your tank getting more and more power.

not quite there yet bro. i have my challenges. i find it hard to maintain very dark blue and purple colours.

Powerful, Walt smith sps very hard to maintain the colour, and u r able to do that. Thumb up. :)

these are first shots after i just got the walt smit from thursday shipment. some didnt make it due to RTN.. a few STN hopefully will stabilise by this week. i hope i will be able to maintain the colours. will see a month from now.. *keep fingers crossed*

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Bro this is what I heard from some senior not sure true or not. He mentioned must go and unpack the sps during shipment, if the Water in the pack is milky even if the colour is super nice, cannot take cause confirm cannot survive. If the water in the pack is clear then can take as they are not stress and high chance of survive. But whether can maintain the colour or not is another issue. :)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

yes.. thats true. the past couple of walt smith / tonga shipments were ruined because of unforeseen delays in shipping hiccups. the water turned milky and there is a bad odour during unpacking. very low chance of survival. alot of people who cheong there to help with the unpacking were disappointed.

some other hardier ones (usually the less nicer ones) could have higher chance of survival but Iwarna refused to sell the corals and declared total loss for whole shipment.

Even for those who arrived later after the unpacking were turned away.

Kudos to them. :score: :score: :score:

but then again, assuming all conditions remaining ideal, some walt smith corals are more sensitive than others to stress. some corals (unfortunately usually tend to be the nicer ones) cant take the stress of transport and packaging and will start to degrade. so buyers need to observe carefully before deciding to take that pc. but then again, sometimes cant see the STN till few hours later put in tank. its a risk we take regardless for corals or fishes alike.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

final part to the clown saga

after spending the past 2 weeks in the betta box bonding with the anemone, i decided to move my final pair of black ice into the main tank. it is decided that i will have 2 RBTA in a tank.. bo pian.

anemone is attached to a rock in the betta box.. so the whole rock is moved.

IMG_1914.jpg

then place the clown fish near the anemone 1 by 1

IMG_1915.jpgIMG_1916.jpg

final result....

IMG_1918.jpg

we all know the anemone is going to move.. just hope it steers clear of the wave makers..

1st position

IMG_1923.jpg

2nd position stayed for 2 nights.. and joined by current old timer picasso pair.

IMG_1931.jpg

IMG_1932.jpg

next day morning shot

IMG_1944.jpg

thats a good position.. its in the front of the tank under a rock and away from all wavemakers. lets hope it stays there permanently.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

yes.. thats true. the past couple of walt smith / tonga shipments were ruined because of unforeseen delays in shipping hiccups. the water turned milky and there is a bad odour during unpacking. very low chance of survival. alot of people who cheong there to help with the unpacking were disappointed.

some other hardier ones (usually the less nicer ones) could have higher chance of survival but Iwarna refused to sell the corals and declared total loss for whole shipment.

Even for those who arrived later after the unpacking were turned away.

Kudos to them. :score: :score: :score:

but then again, assuming all conditions remaining ideal, some walt smith corals are more sensitive than others to stress. some corals (unfortunately usually tend to be the nicer ones) cant take the stress of transport and packaging and will start to degrade. so buyers need to observe carefully before deciding to take that pc. but then again, sometimes cant see the STN till few hours later put in tank. its a risk we take regardless for corals or fishes alike.

Hello,

May I ask which Walt Smith SPS species did you select? Some species can and do thrive in captive reef systems and others will turn brown and eventually STN and die.

From my experience, Fiji s.hystrix, a.sameonsis, stylo, porites are the easier ones to keep colour and have growth. The tabling types (e.g. a.hyacinthus), microclados, tricolour validas, thick branch types (e.g. a.gemmifera, a.monticulosa) are very challenging to maintain colour and have decent growth unless your system water is very clean and flow is very strong and random. Naturally, stability, lighting etc is also a must.

Link to comment
Share on other sites

Bro this is what I heard from some senior not sure true or not. He mentioned must go and unpack the sps during shipment, if the Water in the pack is milky even if the colour is super nice, cannot take cause confirm cannot survive. If the water in the pack is clear then can take as they are not stress and high chance of survive. But whether can maintain the colour or not is another issue. :)

That is absolutely correct. Of course, noting for signs of recession and stress such as basal STNing is also a must when selecting such delicate animals.

Having said that, I picked a tricolour valida and a jade green sameonsis from the WS shipment before the last one in March 2012 and they didn't arrive in the best of conditions due to a 24 hour delay in the flight schedule. As of today, they are recovering from shipping trauma where they had a browned out episode and now they are growing and colouring up. Lots of TLC needed for them :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      LF bird nest coral

    2. 0

      WTS Items

    3. 0

      WTS CO2 scrubber media

    4. 1

      WTS used Coral Rack (Magnet)

×
×
  • Create New...