Jump to content

Lawchan marine tank part 2


lawchan77
 Share

Recommended Posts

  • SRC Member

picassos are a variant of perculas while snowflakes are from Amphiprion ocellaris family.

you can find more information about all sorts of clown here..

http://www.orafarm.com/products/fish/clowns/

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

wasnt too happy with my previous scape and felt the right side too 'heavy' and rocky.. so decided to do some adjustments and shift some sps too.

final shots so far..

IMG_1730.jpg

IMG_1732.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

found this very nice rock where i can create my zoas garden. but the stand wasnt very even and definitely wasnt sturdy enough on its own. will topple easily due to the heavy weight on top and narrow base.

but it looks good..

IMG_1630.jpg

so decided to do a little modification in order to create a bigger base.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Place a suitable diameter pvc piping below will solve the issue

Selling big game fishing equipment. Stella 20k / 17k .. made in Japan jigging blue rose / kabuzu popping rod... pm for prices

Link to comment
Share on other sites

  • SRC Member

DIY project.

in order to create a bigger base and cover the top part so i can put more zoas, i decided that customise rockwork is the only way.

step 1

get a plastic container and pour sand. create a flat base

IMG_1675.jpg

step 2

put the rock in and cover the base with concrete and marine sand mix.

IMG_1676.jpg

IMG_1676.jpg

step 3

brush to create a rough surface. coralline algae will grow easier. the top part is a hole where i will not be able to place anything. so i chose to cover it up to glue zoas frags or place zoas rock in future.

IMG_1687.jpg

step 4

sun for 3 days

IMG_1689.jpg

step 5

the painful curing process - 2 months minimum...

IMG_1718.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

been curing for 2 weeks plus.. took the rock for a quick dip in main tank to take pics of final effects.

IMG_1738.jpg

IMG_1734.jpg

IMG_1733.jpg

IMG_1737.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Supper creative and determined reefing couple by far.

I didnt know you guys were doing the base for your zoas gallery This is gonna be an awesome Zoas Gallery !!!

Treat others the way you wanna be treated...

 

 

Link to comment
Share on other sites

  • SRC Member

Supper creative and determined reefing couple by far.

I didnt know you guys were doing the base for your zoas gallery This is gonna be an awesome Zoas Gallery !!!

haha.. what did you think we were doing when i asked you for the recipe for mixing cement? initially planned to have different colour of zoas on each rock petal but my zoas collection is growing. guess this is going to be a rojak zoas garden in random colours.

in case you want to make frag plugs again, i still have balance cement and sand.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Wow, this is very nice. I applaud your determination to get it right.

thanks bro!!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

haha.. what did you think we were doing when i asked you for the recipe for mixing cement? initially planned to have different colour of zoas on each rock petal but my zoas collection is growing. guess this is going to be a rojak zoas garden in random colours.

in case you want to make frag plugs again, i still have balance cement and sand.

The little indentation on the skeleton is soooo perfectly spaced for little zoas frags to start with and my imagination runs wild as i forsee all the twinkle twinkle little star all over it !!!

Treat others the way you wanna be treated...

 

 

Link to comment
Share on other sites

been curing for 2 weeks plus.. took the rock for a quick dip in main tank to take pics of final effects.

IMG_1738.jpg

IMG_1734.jpg

IMG_1733.jpg

IMG_1737.jpg

Very nice!



Specs

Return pump: 2 x Eheim 1260 (with 1 pumped to chiller before returning to main)
Chiller: Hailea HC-500A (1/2 hp)
Skimmer: Deltec SC2060
Lightings: 8 x 24W ATI Sunpower T5 fixture
Wavemakers: Vortech MP40, MP10, Tunze nanostream 6045
Additives: TLF C-balance (2 parts Ca and Alk) via Kamoer 3 channel dosing pump; Polyp-lab Reef Resh; FM color elements

Link to comment
Share on other sites

been curing for 2 weeks plus.. took the rock for a quick dip in main tank to take pics of final effects.

IMG_1738.jpg

IMG_1734.jpg

IMG_1733.jpg

IMG_1737.jpg

Swee!!

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

thank you bros for your endorsement. really appreciate.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

some simple upgrade.. was doing some minor renovation to my house and added cabinets to my house. got the guys to do some upgrade for me to include soft closing cabinet doors for my fish tank. haha.

thank you Closet Design guys!

IMG_1751.jpg

IMG_1753.jpg

IMG_1752.jpg

IMG_1755.jpg

IMG_1758.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Vaseline also can

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

didnt know that.. maybe use that next time.. less messy.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Beautiful tank & nice couple :)

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

thanks for the complements james.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

just added a set of 4 tubes T5 ATI sunpower to my existing 3xradion.

feels that i'm not able to hold on to dark purple colours.. sps like purple valida lightens to a pastel colour.

but red holds on very well instead.

to test out the radion efficiency, i put some sps that was turning brown or stn. the colours actually revived and radion brought back the colours.

only time will tell...

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member
Awesome zoas garden!!!!! I lioke!!!!

glad you like it bro... now got alot more space for zoas to grow. when mature will be a 'flower pot'.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

some pictures on how radion and ATI is installed.

Front view

IMG_1783.jpg

side view

IMG_1784.jpg

other side

IMG_1785.jpg

top view

a customized pc of acrylic sheet to fit the 3 radions together. this way, each radion height, height and distance is uniform. no need to adjust string by string. so troublesome and time consuming.

IMG_1786.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Nice, That is the ATI power module not sunpower. =)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling corals Zoas

    2. 1

      Coral Decom Sale

    3. 0

      WTS: Yellow oxide Zoa

    4. 1

      Coral Decom Sale

×
×
  • Create New...