Jump to content

Lawchan marine tank part 2


lawchan77
 Share

Recommended Posts

  • SRC Member

ya man.. burnt BIG BIG hole. i've reached my shopping credit limit for the next 3 months.

anyway after seeing the aussie shipment, it'll be difficult to surpass that expectation to reach for my wallet.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Wow bro very impressive aussie LPS, nice catch!!!=)

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

How much does the aussie scoly cost? Can PM me?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Wow bro very impressive aussie LPS, nice catch!!!=)

thanks bro.. glad to finally see you in person at iwarna today!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Next, Aussie Sps. Be prepared.

Cheers,

whoa. who importing in? hope i can recover by then!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Very nice symphyllia wilsoni you have there.

thank you for the id... thats a mouthful..

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Wow! Did I also see 2 black tangs??

ya.. 2 black tangs.. 1 big 1 small.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member
How much does the aussie scoly cost? Can PM me?

pmed...

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

archilles cant wait for seaweed to be fixed. wonder if can train to feed by hand.. :yeah:

having a feast!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

got my doctor fish from Marine life. pinnacle has many doctor fishes as of this morning,

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

as some of you may know, i had some problem with my clownfishes (snowflake and picasso) when i brought them back in Dec 2011. first, they refused to explore the rest of the tank and preferred to spend ALL their time bobbing on the water surface. they completely ignored the RBTA i bought for them and avoided it like the plague. a couple of weeks back, they started to explore the bottom half of the tank but still prefer to host on the water surface during sleeping time.

i have nearly given up until bro mengyang_neo bought 2 baby clownfishes and succesfully host them in the RBTA. i decided to try again...

:superman:

i devised a strategy to maximise my chance of successful hosting... first to capture them and put into a beta box and then place in the sump tank where there is no distraction. then i will need another anemone since my original one has stubbornly attached itself onto one of my main rocks. i reckon the bigger the anemone, the better since in a confined area, the clownfishes will have not much space to run compared to the main tank...

although the clownfishes were already in my main tank, capturing them was no feat since they were hosting on the water surface. a plastic container in the night while they were sleeping was all i needed. the next day, i went to iwarna to get a small RBTA (they only had a small one) ... if they accept this RBTA, they will appreciate the bigger one in the main tank......

nothing happened.. :thumbdown: :thumbdown: :thumbdown:

IMG_1520.jpg

IMG_1517.jpg

maybe the RBTA too small.

the next day, i went back to Iwarna and got a common green anemone. at the same time, brought back my black ice clown fish which I had reserved from Fuel some time back.

i released the big green anemone into the betta box and it didnt surprise me when my 2 old timers were trying their best to avoid it. when i introduced the black ice in, i was worried the 2 old timers would bully the new one and stood by to intervene. however, they quickly accepted the black ice and there was no major shoving or fights.

i was REALLY surprised when then black ice checked out the anemone first and started to wriggle in it. it has never seen an anemone before and it was its first encounter. whoohoo!!!

IMG_1524.jpg

half an hour later, picasso followed suit... double whoohoo!!! :yahoo: :yahoo: :yahoo: :yahoo:

IMG_1529.jpg

clowns in RBTA. you can see that the snowflake is still reluctant to get near the anemone..

picasso and black ice in the bigger anemone while the snowflake trying to get his BFF out of the anemone.

i thought 2 out of 3 isnt so bad afterall.. haha

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

this morning, the snowflake hosted!! now they are all anemone lovers.. cant get them out of the thing even during feeding time..

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

since i'm off buying corals while recovering from the aussie shipment, some random videos of my Archilles and Black tang eating out of my hand.... yum yum.

Archilles tang cheong ar!!!

black tang also cannot lose out.. eat first then say.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

group eating pellets

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

my new toy.. magnetic frag station. will look super natural when coralline algae colours up the station.

great as a temporary place for holding frags or for new frags to stabilise.

side view

IMG_1537.jpg

front view

IMG_1538.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

The myth that captive bred clownfishes don't host anemones is now debunked. :D

yes... whew!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Congrat congrat, your clown is hosting the anemone. Well done.

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

Congrat congrat, your clown is hosting the anemone. Well done. ��

thank you! you inspired me!

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...