Jump to content

Lawchan marine tank part 2


lawchan77
 Share

Recommended Posts

  • SRC Member

I decided to investigate the air quality in the cabinet after some bros reminded that it may be too hot when cabinet is closed. I considered placing the compressor outside but that included major reno cos wifey said no trunking in the house after our major renovation 2 years ago. so it was either in the cabinet or nothing at all.

Luckily the compressor isnt very warm when working and much more quiet than the old chiller I had. no complaints so far.

2 x radion lights are on from 3pm ~ 1am reachin full light spectrum by 6pm ~ 10pm. I figured this period will be the peak temperature to measure.

Chiller kicks in every 2hours for 15 ~ 20 mins. the water temperature is set between 25 ~ 26 degrees celcius.

temperature in cabinet:

peak temperature when chiller turns off : 38 degrees

after 15mins, temperature drops to: 32degrees.

after 1 hour, temperature drops to 29 degrees and hovers..

can any bros advise what is the ideal temperature inside the cabinet? the above considered hot?

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

any rise in temperature in the tank would already lead to issues like

- increased evaporation

- heating up the water, thus the condenser may have to kick in slightly more then compared to if it was placed somewhere else

- can't store certain items that requires the 'cool dry place' in the cabinet

i believe other bros have mentioned a few others. i personally wouldn't be happy if my cabinet was at 38 degrees, room temperature would be my ideal. but seeing your constrains it seems quite hard for you to work around this problem. active cooling within the cabinet perhaps?

Link to comment
Share on other sites

  • SRC Member

Not sure if this works...installing a clip-on fan or computer fan inside the cabinet to blow out the hot air (for cool air to enter)...and have the plug on a timer (programme to on in the day which is warmer)? Or connect the plug together with the chiller temp controller so that when the chiller is activated to kick in, the fan will be on at the same time; when the chiller is off, the fan follows?

Link to comment
Share on other sites

will the salt spray in yr sump will corrode yr compressor? or is there partition?

i would think it will corrode the fins of the compressor

Humble tank :

Size: 4x2.5x2 ft - Display 

Equipment :

Return 1 : Ecotech marine L1

Return 2 : Ecotech marine M1

CR : Skimz CM122 - Caribsea extra course media with Grotech magnesium

Light : ATI 8x54W

 

 

Link to comment
Share on other sites

Radion lights installed 28th Dec 2011.

IMG_0974.jpg

Trust me , u will love this lighting . am running natural mode with it . remember to update the software

Humble tank :

Size: 4x2.5x2 ft - Display 

Equipment :

Return 1 : Ecotech marine L1

Return 2 : Ecotech marine M1

CR : Skimz CM122 - Caribsea extra course media with Grotech magnesium

Light : ATI 8x54W

 

 

Link to comment
Share on other sites

  • SRC Member

will the salt spray in yr sump will corrode yr compressor? or is there partition?

compressor in the first compartment (extreme left) while sump in the 3rd compartment (extreme right). in the middle got dosing pump containers..

no partition in the cabinets. is salt spray still possible? how to test?

thanks for advise bro.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Trust me , u will love this lighting . am running natural mode with it . remember to update the software

so far so good.. now only cycling water and a few zoas and hardier sps. seems to be able to sustain sps.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

its day 6 of a pair of AT in the same tang. initally, both were chasing each other but now seems to have calmed down.

I hope they dont kill each other

DSC_0565.jpg

DSC_0564.jpg

DSC_0532.jpg

DSC_0526.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

some random corals stock list

cant seem to get the colour right.. maybe my picture taking skill lousy. sigh..

true fiber optic

IMG_0409.jpg

royal blue millie

IMG_0406.jpg

Bam Bam zoas

IMG_0404.jpg

digi

IMG_0401.jpg

metallic blue digi

IMG_0415.jpg

sunflower zoas

IMG_0399.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

continue.. again.. the colours didnt come out correctly... :eyeblur: :eyeblur: :eyeblur:

radioactive birdnest

IMG_0397.jpg

somewhere over the rainbow

IMG_0390.jpg

rainbow

IMG_0382.jpg

capitata

IMG_0374.jpg

haweye + sunflower zoas

IMG_0370.jpg

ORA red planet

IMG_0426.jpg

mandarin orange

IMG_0424.jpg

setosa

IMG_0421.jpg

chilli pepper monti

IMG_0411.jpg

golden clove

IMG_0400.jpg

not sure what LPS this is...

IMG_0413.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

oh.. can help to id that for me? maybe i mixed up with another zoas.. :paiseh: :

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

I love the idea of the QT section.

Can you PM me the cost of the whole cabinet with tank?

How come it is not using black silicon?

after my first change of NSW on 31st dec (8 jerry cans in total and nearly died)..

spent the rest of the day setting up phosphate, carbon reactor, dosing pump and tidy up the cables.

cant seem to find anti slam hinges though.. any recommendation bros?

IMG_0215.jpg

IMG_0214.jpg

right side view

IMG_0208.jpg

window to quarantine tank (right side view)

the first 2 occupants - picasso and snowflake

IMG_0211.jpg

front view

IMG_0207.jpg

Left side view

IMG_0207.jpg

Link to comment
Share on other sites

  • SRC Member

can call victor from iwarna for the price at 92259393 cos i got a bundle price including setup, equipment, compressor and disposal of old tank etc.

honestly, back silicon didnt cross my mind. mainly cos my interior is mostly white, tank cabinet is white.. and most importantly, I wanted uninterrupted maximum viewing area. wanted tank to match my interior.

IMG_1071.jpg

IMG_1070.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

new addition..

base supposed to be blue but pic doesnt show..

IMG_0418.jpg

moon coral

IMG_0421-1.jpg

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

a better view of the mandarin orange..

IMG_0375.jpg

let me know if i got this wrong..

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling corals Zoas

    2. 1

      Coral Decom Sale

    3. 0

      WTS: Yellow oxide Zoa

    4. 1

      Coral Decom Sale

×
×
  • Create New...