Jump to content

Setting up shop for a Rimless 3by3by2


LittleBurger
 Share

Recommended Posts

That's a big wow for me!! :ooh:

Dun mind can pm me price of your compressor, contact of the derek/company selling it. Thks.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Damn bright.. Wheres's the princesses??

Hi Terryz, here they are. buy 6 left 5.

20120729_225124.jpg

20120729_225308.jpg

is tat wat u call pale lip tang? how is it? eating well?

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

That's a big wow for me!! :ooh:

Dun mind can pm me price of your compressor, contact of the derek/company selling it. Thks.

Hi bro, have sent u contact of Derek.

planning to get another bulb, not sure to get mixed type or full actinic. regretted buying my other par38 bulb frm simlim tower....

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Hi Terryz, here they are. buy 6 left 5.

20120729_225124.jpg

20120729_225308.jpg

is tat wat u call pale lip tang? how is it? eating well?

Really beautiful!!!

Yup, it is also called a pale lip tang... It is one of the more timid tang, I have kept so far... It is hiding under my pump and pipe for the whole day.. Feeding very cautiously... Think it will get bolder as time pass..

Member of:

post-1182-0-60431600-1322062247_thumb.jp

Link to comment
Share on other sites

  • SRC Member

Your par38 is mixed type or royal blue + blue?

Hi bro, mixed type.

Screenshot_2012-07-30-07-42-12.png

something chasing them in the tank n they jump out. my mcsosky flasher wrasse male n female pair jump out one after another... but dun know he jump, she jump or other way round. never buy flasher wrasse again after...

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

nice tank

Thanks. But not colorful enough. Tank still quite bare.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

There's always So much to learn n improve in reefing... at least for me.

I was using a Hitachi 14w energy saving spiral bulb which is "equivalent" to a 80w incandescent bulb.

I varied the height of the bulb. My cheato shows growth when I position my light nearer to the water. Tat makes sense.

After reading on one of the thread

The info about spiral tube bulbs to have a parabolic reflector to direct the lights more effectively.

Therefore I decided to try out using par30 bulb.

Using spiral bulb

20120921_154637_zps5a3838ca.jpg

using 5watt bulb

20120921_154510_zpsb0b8fc08.jpg

Notice the cheato are very green using the 5 Watt bulb. The sump surrounding are dimmer.

The added advantage of using this type of bulb would be it minimize coralline algae from growing in your FR n pumps.

Disadvantage would be sump is dimmer.

After searching and found another useful info on led n other bulb comparison.

http://www.designrecycleinc.com/led%20comp%20chart.html

Screenshot_2012-09-21-16-20-54_zps589401ef.png

Now is to observe the growth rate.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

Btw, those using par bulbs might have difficulties screwing into the e27 or e14 holder.

U can go sim lim tower to buy those extension.

20120921_154808_zpsa3dd56f4.jpg

The short white pc is a e14 to e27 converter. it helps to lengthen the light socket So tat the bulb will be able to screw in, otherwise the umbrella heatsink might prevent the bulb from screwing into the socket base.

There's also a e27 to e27 flexible neck extension. but need to check if the flexible neck is strong to support the bulb.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • 3 months later...
  • SRC Member

Was wondering y some sps are ejecting white strands when my water parameters seems OK.

The spider sponge didn't open and some parts of the sponge near the tip seems to be dying.

Later read tat leather coral ejects toxins tat will stun the growth of hard corals. Though there are mixed concerns abt leather coral toxin, decided to throw it away.

This morning the spider sponge polpys open. Not sure if it's coincidence But So far only read tat leather affects hard corals. It might worth a try if u have a leather n things in the tank dun look good.

20121222_205524.jpg

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • 2 weeks later...

Bro any updates on your tank?

Coraline algae start spreading?

Reef
Tank: 48"x 24"x 24"
Lightings: Maxspect Razor 120w x 2

Skimmer: Skimz Kone SK1
Chiller: Hailea 1/4 hp w/ Aquabee 3000
Wave Maker: Tunze 6065 x 2
Return Pump: Eheim 1262
Uv: Coralife 9 watt Uv w/ Eheim compact 1000


Fowlr
Tank: 36"x 21"x 16"
Lightings: Beamswork Ultrabright Led x 2
Skimmer: Skimz SM161
Wave Maker: Maxijet 1200
Return Pump: Eheim Compact 2000

Link to comment
Share on other sites

  • SRC Member

thats sunburst anthias? nice!

yep. Sunburst. The fish tat I failed to keep on my old tank. Maybe too much rock n not enough free space to swim around. This time round try to scape with more free space like the ocean.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

Got my yasha first from ah Beng. Few mths later got the shrimp from CF.

The goby already got its Den. Quite anxious if the goby will pair up with the shrimp. Let go of the shrimp near to the goby's den. Glad tat they form a pair within a day. U can see immediately the goby acted strange, somehow sensing its bunk mate had arrived.

Planted a bodhdi tree next to their lair. Hopefully the tree can survive....

20130101_231715.jpg

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

Bro any updates on your tank?

Coraline algae start spreading?

Hi bro. I would say they are booming n some start to "plate" . But somehow my previous tries of sps were not successful.

I tested my water for the few important parameters n no3 is the only less than perfect... hovering at 12ppm using redsea test kit, salifert is 0ppm.

I like anthias so i need to feed often but it will increase the bioload. But well, if a tank don't have much inhabitants which try to mimic as close as possible a coral reef, I guess my enthusiasm for this hobby will die n probably decomm in future. Of cos I can't add any inhabitants tat are deem not reef safe.

The recent discovery of toxin from leather coral which kills off another species to be added is sad, though adding carbon would help but I don't want to take the risk.

So I stopped buying sps and did some simple modifications to my filtration or nutrient expo by growin more cheato in the sump N flow to sump. Never tried ats as not enough space in the sump, salt creep n wanted as little maintenance as possible.

I continue to feed regularly and tested my water for a few mths till i get a constant 0ppm for no3 & po4.

Just bought a few frags n now testing water again....

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Hi bro. I would say they are booming n some start to "plate" . But somehow my previous tries of sps were not successful. I tested my water for the few important parameters n no3 is the only less than perfect... hovering at 12ppm using redsea test kit, salifert is 0ppm. I like anthias so i need to feed often but it will increase the bioload. But well, if a tank don't have much inhabitants which try to mimic as close as possible a coral reef, I guess my enthusiasm for this hobby will die n probably decomm in future. Of cos I can't add any inhabitants tat are deem not reef safe. The recent discovery of toxin from leather coral which kills off another species to be added is sad, though adding carbon would help but I don't want to take the risk. So I stopped buying sps and did some simple modifications to my filtration or nutrient expo by growin more cheato in the sump N flow to sump. Never tried ats as not enough space in the sump, salt creep n wanted as little maintenance as possible. I continue to feed regularly and tested my water for a few mths till i get a constant 0ppm for no3 & po4. Just bought a few frags n now testing water again....

Bro,

My enthusiasm for this hobby has been up and down since I started my first marine tank 16 years ago. I have had tank crash. . unsuccessful attempts with certain corals and fishes etc. . change 6-8 tanks over the duration. . but eventually I still come back to the hobby.

I think the most impt thing is to have the patience and friendships with other fellow reefers. It is boring to go to the farm alone to handpick corals or do everything urself. . but it changes when you "chiong" together with other reefers.

Let me know if it's convenient to pop by your place, I would like to see your set-up. Always like rimless and cube tanks.

Reef
Tank: 48"x 24"x 24"
Lightings: Maxspect Razor 120w x 2

Skimmer: Skimz Kone SK1
Chiller: Hailea 1/4 hp w/ Aquabee 3000
Wave Maker: Tunze 6065 x 2
Return Pump: Eheim 1262
Uv: Coralife 9 watt Uv w/ Eheim compact 1000


Fowlr
Tank: 36"x 21"x 16"
Lightings: Beamswork Ultrabright Led x 2
Skimmer: Skimz SM161
Wave Maker: Maxijet 1200
Return Pump: Eheim Compact 2000

Link to comment
Share on other sites

  • SRC Member

Bro,

My enthusiasm for this hobby has been up and down since I started my first marine tank 16 years ago. I have had tank crash. . unsuccessful attempts with certain corals and fishes etc. . change 6-8 tanks over the duration. . but eventually I still come back to the hobby.

I think the most impt thing is to have the patience and friendships with other fellow reefers. It is boring to go to the farm alone to handpick corals or do everything urself. . but it changes when you "chiong" together with other reefers.

Let me know if it's convenient to pop by your place, I would like to see your set-up. Always like rimless and cube tanks.

wah. Change So many tanks. Rich man. So change tank everytime it crashed?

It's demoralizing when stuff u put in die. But at the same time, it will make u ponder on the failure and read up on the species n try again. I find tat humans r a funny species. If a gal too easy to get, u dun appreciate, if gal hard to get, then will appreciate.

It is good to have friends in the hobby to maintain the interest N exchange views. But I think family appreciation is the most crucial form of support.

I believe to sustain the interest, one must cultivate the inhabitants like its child. Like wat u mention patience. U watch it grow. But if one only likes the mental process of buying stuffs which is the main motivating factor for the hobby, then it is not sustaining.

If u staying in the west, we can go coral farm n lck together.

Pls pm me your contact. Thks!

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Hi bro. I would say they are booming n some start to "plate" . But somehow my previous tries of sps were not successful.

I tested my water for the few important parameters n no3 is the only less than perfect... hovering at 12ppm using redsea test kit, salifert is 0ppm.

I like anthias so i need to feed often but it will increase the bioload. But well, if a tank don't have much inhabitants which try to mimic as close as possible a coral reef, I guess my enthusiasm for this hobby will die n probably decomm in future. Of cos I can't add any inhabitants tat are deem not reef safe.

The recent discovery of toxin from leather coral which kills off another species to be added is sad, though adding carbon would help but I don't want to take the risk.

So I stopped buying sps and did some simple modifications to my filtration or nutrient expo by growin more cheato in the sump N flow to sump. Never tried ats as not enough space in the sump, salt creep n wanted as little maintenance as possible.

I continue to feed regularly and tested my water for a few mths till i get a constant 0ppm for no3 & po4.

Just bought a few frags n now testing water again....

Don't give up! Not yet! .... Preserve n I sure ur patience will pay off!

Tank Size: 3 x 3 x 2 with 3.5ft cabinet

Link to comment
Share on other sites

  • 2 months later...
  • SRC Member

On refugium lighting

The par38 bulbs bought from sim lim tower cannot be turned on for more than 10hrs. So far all blown due to heat.

Had tried UP aqua Z led all white fixture for refugium growing cheato. Strange is always grown cyano.

Passed my aqua Z to my brother planted tank and bought the odyssey 18w, 2blue 4 white clip on led.

And never grow cyano.

On 2 part additives

Using ESV and the ratio is 35ml Ca to 50ml Kh. Had bought some food grade kh powder from Madpetz and dissolving 120grams of kh powder into 4kg of ESV kh. Hope I can equal the kh & ca dosing amount.

If succeed, will try to do the same for Ca. Hoping tat it will prolong the 2 part usage, reduce frequency of buying 2 part and yet have the vital minerals added to the tank.

On nutrient exportation

Estimated water volume of 150gals, 9 anthias, a algae blenny, starry blenny, possum wrasse, leopard wrasse, orange fire fish, 2xroyal gamma, 2 xclownfishes, 2xjapanese angelfish.

Phosphate removal is unachievable with biopellets and cheato combo. Phosphate stable between 0.08 and next higher range.

So question is should I double the biopellets volume( right now using FR35 full capacity ) to see if phosphate will go down or using po4 media.

Quite disheartened with biopellets so Tried rowa 200ml but po4 dun budge. Tried 800ml then po4 dropped

Between 0.03 and higher range.

Immediately can see positive response from my remaining few surviving sps.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member

Biopellets removed nitrate more than phosphate if I not wrong. I observed algae actually growing inside my biopellets reactor when exposed to indirect sunlight and concluded that if its effectively removing po4, then there shouldnt be any algae inside the biopellet reactor at all. In fact i feel its a controlled carbon compound dosing, something similar to volka or sugar dosing, purpose is for the bacteria to multiply and consume the nutrients in tank before process by the Skimmer.

For po4 removal, I find rowaphos in a FR the most effective. There was once I used too much rowaphos and it completely wipe out all my hair algae within 24hrs, amazing stuff. But end of day, identify and eliminating the po4 root cause should be the ultimate goal. Main contributor from my experience are always fish food(esp frozen),fish poops, nsw and using tapwater without DI/RO.

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member
Biopellets removed nitrate more than phosphate if I not wrong. I observed algae actually growing inside my biopellets reactor when exposed to indirect sunlight and concluded that if its effectively removing po4, then there shouldnt be any algae inside the biopellet reactor at all. In fact i feel its a controlled carbon compound dosing, something similar to volka or sugar dosing, purpose is for the bacteria to multiply and consume the nutrients in tank before process by the Skimmer. For po4 removal, I find rowaphos in a FR the most effective. There was once I used too much rowaphos and it completely wipe out all my hair algae within 24hrs, amazing stuff. But end of day, identify and eliminating the po4 root cause should be the ultimate goal. Main contributor from my experience are always fish food(esp frozen),fish poops, nsw and using tapwater without DI/RO.
ya. Biopellets is good for producing bacteria for filter feeders. Can't understand is dosing vodka can get po4 to zero. I can only guess if using biopellets, then one cannot use other nitrate removal so as to have nitrate present to facilitate the biopellets to do its job. Normally nitrate removal medium is carbon n carbon makes yr water sparkle. The dilemma.... Gonna give last shot on biopellets. Doubling the quantity n without other chemical filtration.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

After doubling biopellets quantity po4 measurement got no diff but more cyano appears.

The red sea reading stays the same color with 800ml of rowa and 1000g of biopellets. The left is the color of the test n for the right, the color disc has been adjusted to 0ppm.

DSC_0081_zps45b2adda.jpg

Decide to test this product. Most likely is lanthamun chloride.

DSC_0078_zpsc27939bb.jpg

Will need go observe how the livestock react to this.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      加拿大保录取_SFU毕业证成绩单——Q微信751558146西蒙菲莎大学学位证_成绩单_办理SFU文凭学历认证Simon Fraser University

    2. 0

      美国学位证_Brandeis毕业证成绩单+Q微信751558146布兰迪斯大学学位证_成绩单_办理Brandeis文凭学历认证Brandeis University

    3. 0

      加拿大保录取_UBC毕业证成绩单——Q微信751558146英属哥伦比亚大学学位证_成绩单_办理UBC文凭学历认证University of British Columbia

    4. 0

      美国学位证_PSU毕业证成绩单+Q微信751558146宾州州立大学学位证_成绩单_办理PSU文凭学历认证Penn State University Park

×
×
  • Create New...