Jump to content

Glass box at CCK corner


thairun
 Share

Recommended Posts

Very impressive. :score:

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

where my comission.....??!!

Yo Bro your job have not done!! :chair:

Still have more task for you hehe :lol:

Very impressive. :score:

Thank you Sir, you too no exception.

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

  • SRC Member

Bro,

My friend have the same problem . High NO 3. Cannot bring down. He have a sanded in his tank.

Not easy looking at how you redo ..he have plenty of rocks scape equivent as you. Think having headache .

Does your parameter better after you remove the underneath which traps alots of detritus ?

What I observe, his sand bed traps lots of detritus. I just help him to remove the sand bed in his sump and clean up all pumps.

Serve better but think problems still there.

Any advise?

---2Ft Cube by MarineLife---2008-2009

http://w w w.absolutereef . com/forums/index.php?showtopic=12369

Skimmer: Deltec APF600 feeder by Eheim 1250

Lighting: Solite 150MH 14k

Supplement: Giesemann T5 Razor, Actinic Plus ~22k

Top-up: Tunze Osmolator Universal 3155

Return: Eheim 1260

Reactor: Skimz FR Rowaphos

---------------------------------------------------------

---1.5Ft Cube by Iwarna---2010- ???

http://www.sgreefclub.com/forum/index.php?/topic/95312-nano-15-cube/

Tank: 1.5Ft Cube,Sump with Chengai Wood Cabinate

skimmer: Reef Oct Nw110

Return: Eheim 1250

Chiller: Hailea HC150A with feeder Eheim Compact 1000

Reactor: Phosphan with Rowaphos

Lighting: MaxSpec G2 110w,DELighting T5 ATI*2,Giesemann T5 Razor ATI*2

WaveMaker: MP10 VorTech

Top Up : ATO with Tank

-------------------------Your Advice is my Success

Link to comment
Share on other sites

Bro,

My friend have the same problem . High NO 3. Cannot bring down. He have a sanded in his tank.

Not easy looking at how you redo ..he have plenty of rocks scape equivent as you. Think having headache .

Does your parameter better after you remove the underneath which traps alots of detritus ?

What I observe, his sand bed traps lots of detritus. I just help him to remove the sand bed in his sump and clean up all pumps.

Serve better but think problems still there.

Any advise?

Those days when I managed my 4 footer lps and softy, I did have this 1in+ sand bed. I have good growth for the beginning and then after a year N & P start to creap all calcifaiction stoped. No3 hovering at 20 ppm all the way no matter what I did and the very most down to 15. when you stir the sand bed especially under the rock areas you will be surprised how much the detritus trapped there. Since then in my 5 footer no more sand BB that it. Esy to maintain and blow out then siphon.

With the starboard (my silly mistake) removed my water from 15ppm NO3 go down to 3ppm but this does not mean good as the sudden change of so much my zoas response no good. Changed shld not be rapid either good or bad IMHE. Like wish if he want to get rid out the sand pls do it in stages part by part.

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

beautiful tank!

time to pay you another visit soon B)

Thanks Bro, you welcome doors are always open :friends:

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

This are some of the eye candies when dosing vodka at its optimum (six months) before I being fooled and rip off my rowaPhos reactor suddenly, thinking vodka itself having the good ability to reduce PO4 but not at all. Then things start to detoriate.

Sky blue tenuis

post-6899-0-56088000-1323011901_thumb.jp

Deep blue tenuis

post-6899-0-95312300-1323011947_thumb.jp

Purple Valida due to placemen (strong flow)t, growth retarded.

post-6899-0-79477700-1323012061_thumb.jp

Neon green tip hammer

post-6899-0-59729400-1323012172_thumb.jp

Lime green efflo table

post-6899-0-16212600-1323012386_thumb.jp

Sunset milli also placement problem (lighting smoothered by other SPS)

post-6899-0-00421500-1323012408_thumb.jp

Acan maxima clam

post-6899-0-16759200-1323012691_thumb.jp

Deep blue stags

post-6899-0-99550000-1323012736_thumb.jp

post-6899-0-13624900-1323012853_thumb.jp

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

Guess what is the last one?

Jade robusta

post-6899-0-75377600-1323013293_thumb.jp

Green bali acro sp

post-6899-0-47921800-1323013336_thumb.jp

post-6899-0-51460700-1323013385_thumb.jp

post-6899-0-04104800-1323013401_thumb.jp

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

Opps........... forgotten the last two,

my red planet and full red table acro sp.

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

Opps........... forgotten the last two,

my red planet and full red table acro sp.

Hi bro,

I salute you for being so brave to re-scape the entire tank again..It's really worst than setting up new tank :bow: !!!

Btw, love your red planet :ooh: !!! PM me if u intend to frag for sale..LOL.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • 3 months later...
  • 2 weeks later...

Wat I can say thairun is really a very nice bro. Teach me so many things while I buy zoas from him. Hahax.

And also let us his very nice zoas in a nice and fair price.

Ya bro... He's generous in sharing his knowledge. A super nice guy...

My Simple Tank Spec

Main Tank LPS and Softies 4x2x2.5ft

Sump Tank 2.5x1.5x1.5ft with lots of LR

Remote Sump Tank 2x1x1ft dsb refugium with chaeto, mangroves and Gracilaria curtissae macroalgae

DIY LED with 6x 3W Blue and 6x 3W White main tank light

DIY LED with 1x 3W Blue and 1x 3W Red refugium light

DIY LED 1x 1W Blue moonlighting

Now convert to skimmerless Tank

1 x Rio 14HF Return Pump

1 x SunSun JVP-102 wavemaker

1 x 2x1 vertical Algae Turf Scrubber with 2x 10W LED Warm White

Link to comment
Share on other sites

  • 1 month later...

It had been sometime I had neglected my post. This is due to work family commitment as well as establishing the tank stability. Things look like coming to norm. For a continuation in this year update let me address some question from my dear members.

Wat I can say thairun is really a very nice bro. Teach me so many things while I buy zoas from him. Hahax.

And also let us his very nice zoas in a nice and fair price.

Ya bro... He's generous in sharing his knowledge. A super nice guy...

Thanks for the nice word bros, after all what is the members in SRC for......help each other right..in a reasonable ways.

I have 6footer with 1 inch+ sandbed too.

Running forb1.5 yr.

My no2 read 0 but my no3 keep at high level.

How to gradually lower it?

By knowing your No2 and No3 we can conclude your tank had stable. No3 is the process of nitrification dont take it bad it good sign. What you have to do now is fine tunning and control the contribution of the nitrification process by mean of natural way or introducing denitrification process.

Agreed with your statement lower gradually, any changes in marine tank drastically will invite disaster. Natural way is like introduce deep sand bed of at least 4in and this to be effective as big as or bigger than your whole bottom surface area. It will take at least 6 mnth nitrogeous process to settle down underneath the DSB. For your case it troublesome to add sand such a big tank. You may introduce ATS (algae turf scruber), algae and fauna in your refugium, even mangroves system like me one time in my initial setup.

P1070422.jpg

untitled.jpgP1050606.jpg

Other way is by introducing denitrification process. I had done one time used sulfur denitrator since the start of my laziness to look after the algae and fauna. It worked for me but it is dificult also to monitor the effluent coz of rotten egg smell. So I decom the process and introduced carbon dosing aka vodka as you can see those pics earlier in my thread (NO3 maintain below 2ppm always). Some may use sugar, viniger or any carbon source. But you must have a good skimmer to export out the byproduct of the denitrification that shld be dark sludge skimmate. There some website you can google tru for correct regimen of those carbon dosing. My case now am using bio-pallet aka solid vodka. Running it for more than six mnth but look like it insufficent and now introducing back little liquid vodka to support it. IMHE those carbon dosing will never get your PO4 down as you required so running any form of PO4 remover is mandatory, PO4 is the number 1 hard coral killer shld be maintain below 0.05ppm value all the time.

Good luck.

Now my SPSes coming back as well as other coral. On the way pls id them if you have any idea.Thanks

post-6899-0-62829000-1335837770_thumb.jp

Closed up

post-6899-0-07814200-1335837806_thumb.jp

post-6899-0-38284700-1335837925_thumb.jp

post-6899-0-23664400-1335837951_thumb.jp

Think pearlberry

post-6899-0-73849100-1335837990_thumb.jp

post-6899-0-10883000-1335838033_thumb.jp

post-6899-0-22391900-1335838141_thumb.jp

post-6899-0-84073200-1335838199_thumb.jp

post-6899-0-08194200-1335838070_thumb.jp

post-6899-0-38037000-1335838917_thumb.jp

post-6899-0-67557900-1335838235_thumb.jp

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

Hi bro,

I salute you for being so brave to re-scape the entire tank again..It's really worst than setting up new tank :bow: !!!

Btw, love your red planet :ooh: !!! PM me if u intend to frag for sale..LOL.

Yes James, during my shifting this 5 jagged months luckily managed to save small part of the RP and red table acro. Will see how they do this coming months. If they start to grow better will let you know bro.

Thanks

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

  • SRC Member
It had been sometime I had neglected my post. This is due to work family commitment as well as establishing the tank stability. Things look like coming to norm. For a continuation in this year update let me address some question from my dear members.

Thanks for the nice word bros, after all what is the members in SRC for......help each other right..in a reasonable ways.

By knowing your No2 and No3 we can conclude your tank had stable. No3 is the process of nitrification dont take it bad it good sign. What you have to do now is fine tunning and control the contribution of the nitrification process by mean of natural way or introducing denitrification process.

Agreed with your statement lower gradually, any changes in marine tank drastically will invite disaster. Natural way is like introduce deep sand bed of at least 4in and this to be effective as big as or bigger than your whole bottom surface area. It will take at least 6 mnth nitrogeous process to settle down underneath the DSB. For your case it troublesome to add sand such a big tank. You may introduce ATS (algae turf scruber), algae and fauna in your refugium, even mangroves system like me one time in my initial setup.

Other way is by introducing denitrification process. I had done one time used sulfur denitrator since the start of my laziness to look after the algae and fauna. It worked for me but it is dificult also to monitor the effluent coz of rotten egg smell. So I decom the process and introduced carbon dosing aka vodka as you can see those pics earlier in my thread (NO3 maintain below 2ppm always). Some may use sugar, viniger or any carbon source. But you must have a good skimmer to export out the byproduct of the denitrification that shld be dark sludge skimmate. There some website you can google tru for correct regimen of those carbon dosing. My case now am using bio-pallet aka solid vodka. Running it for more than six mnth but look like it insufficent and now introducing back little liquid vodka to support it. IMHE those carbon dosing will never get your PO4 down as you required so running any form of PO4 remover is mandatory, PO4 is the number 1 hard coral killer shld be maintain below 0.05ppm value all the time.

Good luck.

Now my SPSes coming back as well as other coral. On the way pls id them if you have any idea.Thanks

Closed up

Think pearlberry

Thanks! Will try Vodka dosing.

Currently dosing mb7 Daily too.

Link to comment
Share on other sites

  • SRC Member

Thanks! Will try Vodka dosing.

Currently dosing mb7 Daily too.

Oh ya, forgot to tell you carbon dosing need supplement of good bac. That a good move mb7. Am using the same and once in 2weeks biodigest 1 ampule. I recommend over dosing the good bac is the way.

To all other expert who dosing vodka do chip in ideas and experience so we can share. Thanks

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

:score: Very healthy fantastic SPS growth mate. :thumbsup:

Thanks bro, hope it stay that way hehe....

Mix reef-Main tank 3x2.5x2.5ftA

TI 3ft 8tube

Hitachi compressor unit 1HP

1 x AP- 702 Deltec

1 x Coral Lab CR with Ph controller; 1X AquaMedic Kalk Reactor top off

Baby fish dosing kh/Sr&Kcl/mg

DI water thru kalkwasser

1 x Skimz Fr with BRS gfo

2 x Rio 32hF main pump

1 x Pinpt Orp monitor

1 X Pinpt Ph monitor

Aquamedic wave maker

Sump 3x1.5ft plumbed together with;

1.5ft cube live rock

Frag tank 5x1x1ft

 

Link to comment
Share on other sites

  • SRC Member

Oh ya, forgot to tell you carbon dosing need supplement of good bac. That a good move mb7. Am using the same and once in 2weeks biodigest 1 ampule. I recommend over dosing the good bac is the way.

To all other expert who dosing vodka do chip in ideas and experience so we can share. Thanks

What's this "once in 2weeks biodigest 1 ampule"?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...