Jump to content

Aquastyle DIY LED Kit

oceanviper

By oceanviper,
in DIY Forum

 Share

Recommended Posts

  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • SRC Member
Posted

Hi there.

Just to share some of the points here for reefer who like to DIY their own LED with kits purchased from Aquastyle.

Below are the kits contents

The connection would be simple.

The dimming would be control by the resistance connected across the white wire as shown in the photo.

post-16802-0-48605100-1321492924_thumb.j

post-16802-0-72492100-1321492940_thumb.j

post-16802-0-71437900-1321492948_thumb.j

post-16802-0-43116700-1321492969_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
Rxcp14 Newbie

Rxcp14

Posted
  • SRC Member
Posted

Hi, can i enquire where u got the kit from? Thanks!:)

Fresh fishes and inverts! What's next? To the salty side of marine of course!:)

"Never to part, lest jealous heaven stole our hearts"

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Hi bro.

The kits can be obtained from Aquastyle.

I'm not using this kits as i have my own DIY using MeanWell LED driver and BO LEDs from another reefer quite some time ago.

I'm just helping out some reefer since they have intention to purchase it.

I'm not sure whether actual purchase have been issue, but if you interested, I can help to check with him.

Probably you guys can share the shipping charges.

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • SRC Member
Rxcp14 Newbie

Rxcp14

Posted
  • SRC Member
Posted

Can bro, do help me check and let me know if there's any catalogue or pricing. Thanks!:)

Fresh fishes and inverts! What's next? To the salty side of marine of course!:)

"Never to part, lest jealous heaven stole our hearts"

Link to comment
Share on other sites
  • SRC Member
oceanviper Enthusiast

oceanviper

Posted
  • Author
  • SRC Member
Posted

Welcome to the LED lighting....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites
  • 4 weeks later...
reckless Newbie

reckless

Posted
Posted

just bought the 36 x LED DIY Dimmable Kit (18x3w white,18x3w royal blue). wanna give it a try. will update and review for the benefit of others once i get the kit.

oh btw total cost with shipping is SGD$209.

The Best Way Is To Keep It Simple.

Link to comment
Share on other sites
reckless Newbie

reckless

Posted
Posted

Okay, Just an update. Received the package within 3 days from online ordering. Actual Delivery took 2 working days to arrive at doorstep. it took me 2 hours to assemble the components together. You can view the pictures of the components

Aquastyle Dimmable 36 LED Light 18 White, 18 Royal Blue With Heat Sink and Fan

Please note that the light effect in the pictures does not justify the actual light effect. You have to see it for yourself to believe. B)

Not": was given the 2 additional LEDs free(1 White, 1 royal Blue), hanging kit and digital thermometer FOC. they did not state this when i made the order. was quite surprised about the hanging kit :)

The Best Way Is To Keep It Simple.

Link to comment
Share on other sites
reckless Newbie

reckless

Posted
Posted

hey bro. no prob! have you check out the link i gave? will lead u to the pictures of the components and two pictures of the tank with the new LEDs. :) Sorry got no videos... if have also, the video can't capture the actual lighting effects and brightness...

The Best Way Is To Keep It Simple.

Link to comment
Share on other sites
  • 2 weeks later...
Ingwe Newbie

Ingwe

Posted
Posted

hey guys.

The lens that came with the set are transparent. Will they be an eyesore when the lights are on? I'm considering if i should spray paint the sides black before snapping them on..

the chips are stuck on the heatsink with some thermal plaster/glue.

post-17039-0-26544300-1325826752_thumb.j

Link to comment
Share on other sites
lauterbrunnen Newbie

lauterbrunnen

Posted
Posted

hi bros, i noticed the led driver that comes with the 24 led and 36 led kit is the same. does this mean that the output light for both is the same? basically the 24 led is brighter and 36 led runs dimmer but since you have more leds on the 36 led kit the effective output is same as the 24 led kit?

Link to comment
Share on other sites
reckless Newbie

reckless

Posted
Posted

hey bros, good question there bro lauter.... hmmm not a electrical expert.. cant help answer u that question.hehe! as for the lenses... it will be bright to the sides too but its tolerable for me. not much of an issue. own preference i guess. you can get a reflector and fix it to the heat sink to cover the sides. the dimming feature is just for you to adjust the lights to your own liking IMO. i tweaked mine for a few times when i first got it. after that i just left it as it is. my LEDs are running with two independant timers to control the Royal blue and white LEDs different on and off timings.

FYI, just an update, my LEDs are still not running at full power. just happy as it is now. corallines are growing fast, my zoas are giving better colours and everything looks good. Pratically no heat is generated. I think the fan is like redundant... but gonna leave it as it is.(lazy to dismantle it from the unit). Still monitoring the drivers though. other than that, still no issues

The Best Way Is To Keep It Simple.

Link to comment
Share on other sites
reckless Newbie

reckless

Posted
Posted

oh and about getting it locally, tried to find... so far no LFS bringing in...yet. the shipping is quite a chunk of the whole cost. :unsure: but oklah... Items came in one piece and im happy with the product.

The Best Way Is To Keep It Simple.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WTS Many Items! Lelong Sale

      Please WhatsApp me at 9173two940 Deal in the East Ecotech MP10 QD - $250 each - 2 sets Good condition - Used for 4 months and kept Maxspect Gyre XF-350 - 1 pair with controller - CN Set - $300 Very good condition - Used for 1 month, washed and kept Fauna Marin Dino X - 250ml - $25 Full - Unopened Copper Power - 4 ounce - $15 Full - Unopened NeoPhos - 500ml - $15 Full - Unopened Red Slime Remover - 20g - $20 Full - Unopened Blue Life Rapid Fish Quarantine Dip - 10 pouches - $20 for all Orcalabs Phospha-Guard BIO-Cubes - 1000ml - $50 Full - Unopened Orcalabs Nitra-Guard BIO-Cubes - 1000ml - $10 Half used Ecotech RMS Mounting Bracket (Slide) for XR30 size - $20 for 2 pieces Some minor cosmetic scratches Tropic Marin Elimi-Phos Rapid - 500ml - $30 Full - Unopened Orcalabs Kalk Plus - 500g - $20 for 2 pieces Full - Unopened Brightwell SpongExcel - 4 oz - $15 Full - Unopened Popbloom 30W Refugium Light with Stand and Remote - $30 Barely used Hailea HK500A Chiller - 1 Set - $250 Good condition - Flushed Brightwell NeoNitro - 500ml - $10 Full - Unopened AquaForest Life Bio Fil - 5000ml - $60 Full - Unopened Fauna Marin Skim Breeze Reactor 1L - $40 Barely used Aqua Illumination Orbit 2 - $290 Brand new, threw away box but never used SeaTorch MS3500 Magnetic Stirrer - $30 Abit of rust residue on the plate but otherwise fully working and rarely used Neptune Apex FS-50 Flow Meter - $35 No packaging but never used before BRS Co2 Scrubber - $15 Good condition Dazs Auto Feeder - $10 Brand new Seneye Reef with Web Server - $50 Used for a year and kept. No slides. Hanna pHep+ pH Tester - $50 Rarely used - Comes with calibration fluids Hanna Salinity Tester - $80 Rarely used - Comes with calibration fluids
      Vaximus in Sell off/Pasar Malam Shop
    2. 3

      letting go softies

      im keen in the paly
      bubblefish000 in Sell off/Pasar Malam Shop
    3. 0

      Wts GIANT Green Morray Eel

      Hi selling this beautiful piece due to moving house soon pm me if keen thanks
      PowderTang in Sell off/Pasar Malam Shop
    4. 0

      WTS beginner SPS

      Monti Setosa Birdnest All for $15 Collection at west Sent from my iPhone using Tapatalk
      tansk in Sell off/Pasar Malam Shop
    5. 0

      Hailea HK-150A chiller

      Selling HK-150A chiller for $150 RFS is I just upgraded my chiller. If you're interested pls pm or contact me at 84812411
      Welly in Sell off/Pasar Malam Shop
×
×
  • Create New...