Jump to content

MP40 Turn by itself

stmomo

By stmomo,
in General Reefkeeping_

 Share

Recommended Posts

stmomo Newbie

stmomo

Posted
  • Author
Posted

iirc, the MP40wES night mode default is 10hrs and run at 50% of the day speed, but you still can increase/decrease the night hrs and night mode speed if you want to ( refers to page 27 of MP40wES Full Manual).

Yes, normal white vinegar.

MP40wES Full Manual

Quick Start Manual

Thanks Bro.... Last night I got it working for the night mode... many thanks.... appreciate it..... :bow:

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites
kira76 Newbie

kira76

Posted
Posted

Thanks Bro.... Last night I got it working for the night mode... many thanks.... appreciate it..... :bow:

I gave up on using the night mode. My house power will occasionally trip due to a suspected faulty light switch, luckily usually when there's ppl in the house. And the timing for the night mode will need to be reset again once power is cut to the MP40. You might want to take note of that. :)

Link to comment
Share on other sites
stmomo Newbie

stmomo

Posted
  • Author
Posted

I gave up on using the night mode. My house power will occasionally trip due to a suspected faulty light switch, luckily usually when there's ppl in the house. And the timing for the night mode will need to be reset again once power is cut to the MP40. You might want to take note of that. :)

Ok Noted... thanks.... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites
clee123 Newbie

clee123

Posted
Posted

I gave up on using the night mode. My house power will occasionally trip due to a suspected faulty light switch, luckily usually when there's ppl in the house. And the timing for the night mode will need to be reset again once power is cut to the MP40. You might want to take note of that. :)

I have the similar light swithch problem with one of the MP40w when it is in night mode... I think it has to do with the driver (the trip might be due to the overheating) rather than the wet side (as I use 4 different wet sides to test/check)...and it usually has another syn problem as slave pump for the problem pump.. so what I do as work around is to put a timer and turn off the pumps as certain time interval to simulate the hight/low tide flow.. :thumbsup:

As for the rest of the three MP40w, I set one as master with two slaves - the slave pump on the same side set as syn slave (white light) and the other pump of the opposite side as anti-syn (orange light). The night mode starts for the three pumps at around 0130 hrs in the interval of 15 mins. Once the three pumps are in night mode, the fourth pump is turn on:

Normal Night mode

Pump1 (Master) 1030 - 0130 0130 - 1030

Pump2 (Slave-anti syn ) 1045 - 0145 0145 - 1045

Pump3 (Slave-syn) 1100 - 0200 0200 - 1100

Pump4 (Stand alone) 1300 - 2300 2300 - 0200 (off)

0200 - 1100 1100 - 2300 (off)

:yahoo:

fts-022012.JPG

Link to comment
Share on other sites
sgpaulkoh Newbie

sgpaulkoh

Posted
Posted

Hi guys... thanks for the advice... it seems like is ok now after i scrap and clean the inner part of the tank....

Btw, jus wondering th bros here ON their MP40 wavemaker 24/7 or ON/OFF on certain timing.... wanna share yr setup?

Thanks a lot..... :bow:

I have mine on when the lights come on.That will be about 12hrs.It's off in the night using a timer.This is to allow the corals to rest.

Link to comment
Share on other sites
stmomo Newbie

stmomo

Posted
  • Author
Posted

I have mine on when the lights come on.That will be about 12hrs.It's off in the night using a timer.This is to allow the corals to rest.

Thanks for sharing bro..... y don u use the night mode and adjust the speed to the min? I just felt that everytime on and off the controller like not very good leh......

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites
kira76 Newbie

kira76

Posted
Posted

I have the similar light swithch problem with one of the MP40w when it is in night mode... I think it has to do with the driver (the trip might be due to the overheating) rather than the wet side (as I use 4 different wet sides to test/check)...and it usually has another syn problem as slave pump for the problem pump.. so what I do as work around is to put a timer and turn off the pumps as certain time interval to simulate the hight/low tide flow.. :thumbsup:

As for the rest of the three MP40w, I set one as master with two slaves - the slave pump on the same side set as syn slave (white light) and the other pump of the opposite side as anti-syn (orange light). The night mode starts for the three pumps at around 0130 hrs in the interval of 15 mins. Once the three pumps are in night mode, the fourth pump is turn on:

Normal Night mode

Pump1 (Master) 1030 - 0130 0130 - 1030

Pump2 (Slave-anti syn ) 1045 - 0145 0145 - 1045

Pump3 (Slave-syn) 1100 - 0200 0200 - 1100

Pump4 (Stand alone) 1300 - 2300 2300 - 0200 (off)

0200 - 1100 1100 - 2300 (off)

:yahoo:

Hehehe, what I mean is one of the light switch in my house is faulty, i.e. sometimes when the light switch is turn off, it will trip my whole house. Nothing to do with the aquarium or the MP40. That's why I gave up setting the night mode for my MP40.

What I do is sometimes I change the MP40 from short pulse mode (usual mode setting) to NTM or RCM over the night and switch back to short pulse in the morning again.

Link to comment
Share on other sites
clee123 Newbie

clee123

Posted
Posted

Hehehe, what I mean is one of the light switch in my house is faulty, i.e. sometimes when the light switch is turn off, it will trip my whole house. Nothing to do with the aquarium or the MP40. That's why I gave up setting the night mode for my MP40.

What I do is sometimes I change the MP40 from short pulse mode (usual mode setting) to NTM or RCM over the night and switch back to short pulse in the morning again.

:poster_oops:

fts-022012.JPG

Link to comment
Share on other sites
stmomo Newbie

stmomo

Posted
  • Author
Posted

Yo guys.... the wetside start to rotate again... but this time 2-3days then very slight rotation..... can i set the pin setup to 15mm to make the magnectic stronger although my glass is 12mm?

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites
kira76 Newbie

kira76

Posted
Posted

Yo guys.... the wetside start to rotate again... but this time 2-3days then very slight rotation..... can i set the pin setup to 15mm to make the magnectic stronger although my glass is 12mm?

If I remember correctly, the pins are in measurement of inches, not mm. What's ur current pin setting now? In mm or inches?

Link to comment
Share on other sites
stmomo Newbie

stmomo

Posted
  • Author
Posted

If I remember correctly, the pins are in measurement of inches, not mm. What's ur current pin setting now? In mm or inches?

Yes that right Bro..... My current setup for the Pin is 1/2 Inch which is around 12mm. Can i set it to 3/4 Inch, around 19mm, instead so that the magnetic will be stronger? will hv any impact on the performance or the reliability? Any bros here tried that before? Thanks.....

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites
kira76 Newbie

kira76

Posted
Posted

Yes that right Bro..... My current setup for the Pin is 1/2 Inch which is around 12mm. Can i set it to 3/4 Inch, around 19mm, instead so that the magnetic will be stronger? will hv any impact on the performance or the reliability? Any bros here tried that before? Thanks.....

I never try that before but I think shouldn't be a problem. Maybe other bros can give advice.

I'm more curious as to what's the reason your wet side turn. Have you check the sponge on the wet side? If it have lost it's friction, thus causing a lost of girp on the glass.

Link to comment
Share on other sites
stmomo Newbie

stmomo

Posted
  • Author
Posted

I never try that before but I think shouldn't be a problem. Maybe other bros can give advice.

I'm more curious as to what's the reason your wet side turn. Have you check the sponge on the wet side? If it have lost it's friction, thus causing a lost of girp on the glass.

Hi Bro, ya.. the wet side sponge is ok leh..... only 3mnths old.....

Any Bos hv tried with a stronger magnetic setup for their MP40? Can advice? Many Thanks...... :bow:

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 6

      Decommissioning Sales of 5f Reef Tank

      Pmed u Sent from my SM-S906E using Tapatalk
      chriskessha in Sell off/Pasar Malam Shop
    2. 0

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton University

      Carleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,Carleton UniversityCarleton Diploma毕业证,卡尔顿大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    3. 0

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University

      办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University办理!!美国MU毕业证*成绩单＠Q微信751558146马凯特大学(本科/硕士)毕业证成绩单*MU学位证书文凭各大学保录取Marquette University 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。
      wfe45345 in Members Tank & Specs
    4. 0

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University

      办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor Unive 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 sity办理!!美国BU毕业证*成绩单＠Q微信751558146贝勒大学(本科/硕士)毕业证成绩单*BU学位证书文凭各大学保录取Baylor University
      wfe45345 in Members Tank & Specs
    5. 0

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western Ontario

      UWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证,教育部认证,University of Western OntarioUWO Diploma毕业证,西安大略大学毕业证——Q微信751558146￥加拿大,毕业证,学位证,文凭,学历认证,留学认证, 【实体公司】QQ/微信751558146办理毕业证，成绩单，教育部学历学位认证，使馆认证，归国人员证明，修改成绩单+信封申请学校，offer录取通知书，在读证明，普利茅斯大学学位证书，Plymouth毕业文凭。 ★★主营项目： ◆办理真实使馆公证(即留学回国人员证明,免费申请货后付款,不成功不收费!!!) ◆办理教育部国外学历学位认证。(网上可查、永久存档、快速稳妥,回国发展,考公务员,落户,进国企,外企,创业,无忧愁) ◆办理各国各大学文凭(世界名校一对一专业服务,可全程监控跟踪进度) ◆提供整套申请学校材料 ◆可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的普利茅斯大学毕业证、百分之百让您绝对满意、设计,印刷,DHL快递;毕业证、成绩单7个工作日,真实大使馆教育部认证2个月。 【真实可查】---【永久存档】---【安全可靠】---【值得信赖】 八年从业经验,专业指导,私人定制,倾心为您解决留学毕业回国各种疑难问题 <1>教育部学历学位认证服务: 做到真实永久存档，网上轻易可查，绝对对客户的资料进行保密，登录核实后再付款。 <2>为什么您的学位需要在国内进一步认证？ 二：留信认证的作用 1：该专业认证可证明留学生真实留学身份。 2：同时对留学生所学专业等级给予评定。 3：国家专业人才认证中心颁发入库证书 4：这个入网证书并且可以归档到地方 5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在公安部网内查询个人身份证信息后，同步读取人 才网入库信息。 6：个人职称评审加20分。 7：个人信誉贷款加10分。 8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才。 育部认证,University of Western Ontario
      wfe45345 in Members Tank & Specs
×
×
  • Create New...