Jump to content

Jacky's Mini Marine Isle


jackywongto
 Share

Recommended Posts

I mentioned I did a minor rescape earlier....

I basically stack the rocks higher on the right sideof the tank.

I had to do that because I glue some of the excess dry rocks I have and will place the on the left hand side to create more caves for the fishes.

post-6893-0-12659300-1323359768_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

My blastos... like the elegance ... got nipped and nipped but still surviving.

Both looks like recovering.

I had to keep relocating them away from the usual route that Rock Beauty and Venustus roams.

After a while, they don't bother to nip anymore....

post-6893-0-39155600-1323360157_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

Still considering... no concrete plans atm.

Looking at your mini carpets, it reminds me that I need to shift mine to another rock. Any bright ideas on how to go about it? Use frozen distilled ice cubes? These guys can be really stubborn when they have their grip on the rocks...

Link to comment
Share on other sites

Still considering... no concrete plans atm.

Looking at your mini carpets, it reminds me that I need to shift mine to another rock. Any bright ideas on how to go about it? Use frozen distilled ice cubes? These guys can be really stubborn when they have their grip on the rocks...

I am waiting for you to embark on your new project.. always interesting to see new tank setups.

As for carpet.... Take the rock that the carpet is on. invert it and suspend it above the water surface. The carpet should slowly drop down into the water.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

I did that previously, but it took like forever and they still won't fall. I thought they would dry up and die before dropping off the rock.

oops... I have no other trick other then.

If you know of any, drop me a note.

will be good to know.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member

just sharing my exp,

i tried the inverting and wait for it to drop method, it took so long that i was more worried of die off from my LR so i gave up, like what peacemaker said "it took like forever" :lol: one method that succeeded, but only on 1 piece was the foot irritation method. fingernail proding (not peeling), or ice cube seemed to work though it takes considerable time and effort, and this is also seeing that a good part of the nem's foot is exposed. if possible, inverting their location in the tank is helpful in coaxing them to climb up towards the light which at the same time hopefully gets the foot out of the gap and onto flatter rock.

for those wedged deep in a crevice, i found the only way to get them out without harming the nems was to break the rock itself. small pieces of rock are still okay but large valuable ones would be a waste to break. these minis are ridiculously stubborn when it comes to removal. for me it wasn't easy even to remove one on the glass.

Link to comment
Share on other sites

just sharing my exp,

i tried the inverting and wait for it to drop method, it took so long that i was more worried of die off from my LR so i gave up, like what peacemaker said "it took like forever" :lol: one method that succeeded, but only on 1 piece was the foot irritation method. fingernail proding (not peeling), or ice cube seemed to work though it takes considerable time and effort, and this is also seeing that a good part of the nem's foot is exposed. if possible, inverting their location in the tank is helpful in coaxing them to climb up towards the light which at the same time hopefully gets the foot out of the gap and onto flatter rock.

for those wedged deep in a crevice, i found the only way to get them out without harming the nems was to break the rock itself. small pieces of rock are still okay but large valuable ones would be a waste to break. these minis are ridiculously stubborn when it comes to removal. for me it wasn't easy even to remove one on the glass.

Hi Bro Straydum

you and YJ are correct. I have another carpet and I tried dislodging it via various method..... my goodness to no avail.

ultimately I had to break the rock. That was the only way possible.

Thanks for sharing.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

updates:

Kenya tree from bro Jer. Looks a bit thin and the greenish tint seems to be fading.

It has since double its size though.....

Jer, any advice?

post-6893-0-05507400-1323706157_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

A zoas frag that dropped from the mother colony while rescaping.

The skirting looks yellowish when it is in a small frag....

post-6893-0-41306800-1323706591_thumb.jp

This is the colony

post-6893-0-97953900-1323706658_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • 3 weeks later...

Gonio garden! looking good Jacky! :) this current scape looks v. natural :goodjob:

Thanks Comy. As you have seen, scape changed again... slightly :P

wau lau...i want to get the kenya tree also...

pbt looking good :goodjob:

Frag for you next time. mine has grown quite a lot already

Is AWESOME!!! Have to clear my doubts before setting up my tanks.. Still a long long way to reach ur standard...

Hey Ben, your tank set up already. My tank is pretty amateurish. YOu will be there in no time.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

corals update:

elegance ... suffered initial attacks from several angels. survived the ordeal. currently doing well.

post-6893-0-79596600-1325617635_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

The gonio in full bloom. My clowns have expanded their territory and taken host on this gonio too.

property upgrade for them. :)

post-6893-0-16830200-1325617798_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Bought some worms and bunched them together. The effect looks good. Gonna get more and build a garden.

post-6893-0-17006700-1325618180_thumb.jp

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

current livestock:

Powder blue tang

neon goby

blue angel juv

flame angel x2

venustus angel

purple firefish

majestic angel

splendid leopard wrasse

true percs pair

starkii damsel

blood shrimp x2

cleaner shrimp

partial fts view

post-6893-0-36490300-1325618312_thumb.jp

  • Like 1

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      专业制作美国普渡大学西拉法叶校区大学毕业证》Q/微信751558146丨办理普渡大学西拉法叶校区毕业证成绩单,文凭留信网认证,保录取Purdue University,West Lafayette

    2. 0

      〖国外毕业证书〗加拿大MSVU圣文森山大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证Mount Saint Vincent University

    3. 0

      专业制作美国福特汉姆大学毕业证》Q/微信751558146丨办理福特汉姆大学毕业证成绩单,文凭留信网认证,保录取Fordham University

    4. 0

      〖国外毕业证书〗加拿大McGill麦吉尔大学毕业证成绩单〖Q/微信751558146〗办理文凭教育部学历学位认证McGill University

    5. 0

      专业制作美国PITT毕业证》Q/微信751558146丨办理匹兹堡大学毕业证成绩单,文凭留信网认证,保录取University of Pittsburgh

×
×
  • Create New...