Jump to content

WTS : MCE 600


jackywongto
 Share

Recommended Posts

This HOB Skimmer is approx 1yr +.

Bought from RD with their prism sticker adhered.

Latest model with the new pump.

In mint condition and like new.

Will deal at $400.

Please PM me.

thanks.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Uppz... more info about the skimmer

Retail price : $659

The Deltec MCE600 is the ultimate hang on skimmer now suitable for aquariums up to 875Ltrs (235 u.s gallons) and since its introduction at the end of 2003 has taken the market by storm. The MCE600 is now fitted with a full size pinwheel and generates 400 lts of air at the pump like the TS1250. Its design gives it the flexibility to hang on almost any brand of aquarium or for it to be used inside or hanging on the outside of a sump.

ts new design gives it the flexibility to hang on almost any brand of aquarium or for it to be used inside or hanging on the outside of a sump. There is a chamber built into the skimmer where media such as RowaPhos or carbon can be used in a sock or bag and there is even an optional media box available. The performance is as you would expect from any Deltec skimmer, drawing in 300lts of air per hour for maximum waste removal.

The Deltec philosophy is that for every 1000 Ltrs of water in the aquarium that you require 400 - 500 Ltrs of air per hour to achieve efficient skimming. This makes the MCE600 skimmer suitable for 235 US gallons for a normally stocked reef aquarium or 150 US gallons for a heavily stocked fish only system. From testing that we have carried out we have found that Deltec skimmers produce at least 2 - 4 times the air volume used on most competitors skimmers which are claimed to be suitable for comparable water volumes.

Technical Data

  • MCE600 Skimmer : Article No. 31117
  • Can be hung on the outside of the aquarium or sump.
  • Draws its own water from the aquarium via the internal needlewheel pump.
  • 400 litres of air/hr are produced at the venturi.
    Dimensions:
    • L 10.25" W 7.1" H 20" (normal position).
    • H 22.5" (allowing for removal of the cup).
    • Height above lip of aquarium - normal position 9".
    • Width of body only external to tank 3.3".
    • Pipes extend by 3.75" from skimmer body.

    Stocking:

  • Normal Stocking 875 lts (235 US gallons)
  • Heavy Stocking 565 lts (150 US gallons)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



×
×
  • Create New...